DOI QR코드

DOI QR Code

Preparation of PVDF/PEI double-layer composite hollow fiber membranes for enhancing tensile strength of PVDF membranes

  • Yuan, Jun-Gui (Department of Chemistry, College of Science, Northeast Forestry University) ;
  • Shi, Bao-Li (Department of Chemistry, College of Science, Northeast Forestry University) ;
  • Ji, Ling-Yun (Department of Chemistry, College of Science, Northeast Forestry University)
  • 투고 : 2013.12.23
  • 심사 : 2014.04.15
  • 발행 : 2014.04.25

초록

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Ahmad, A.L., Ideris, N., Ooi, B.S., Low, S.C. and Ismail, A. (2011), "Morphology and polymorph study of a polyvinylidene fluoride (PVDF) membrane for protein binding: Effect of the dissolving temperature", Desalination, 278(1-3), 318-324. https://doi.org/10.1016/j.desal.2011.05.046
  2. Arevalo, J., Ruiz, L.M., Albarracin, J.A.P., Perez, D.M.G., Perez, J., Mreno, B. and Gomez, M.A. (2012), "Wastewater resuse after treatment by MBR. Microfiltration or ultrafiltration", Desalination, 299, 22-27. https://doi.org/10.1016/j.desal.2012.05.008
  3. Balachandra, A.M., Baker, G.L. and Bruening, M.L. (2003), "Preparation of composite membranes by atom transfer radical polymerization initiated from a porous support", J. Membr. Sci., 227(1-2), 1-14. https://doi.org/10.1016/j.memsci.2003.07.009
  4. Castaing, J.B., Masse, A., Pontie, M., Sechet, V., Haure, J. and Jaouen, P. (2010), "Investigating submerged ultrafiltration (UF) and microfiltration (MF) membranes for seawater pre-treatment dedicated to total removal of undesirable micro-algae", Desalination, 253(1-3), 71-77. https://doi.org/10.1016/j.desal.2009.11.031
  5. Chinpa, W., Quemener, D., Beche, E., Jiraratananon, R. and Deratani, A. (2010), "Preparation of poly (etherimide) based ultrafiltration membrane with low fouling property by surface modification with poly (ethylene glycol)", J. Membr. Sci., 365(1-2), 89-97. https://doi.org/10.1016/j.memsci.2010.08.040
  6. Feng, C.Y., Khulbe, K.C., Matsuura, T. and Ismail, A.F. (2013), "Recent progresses in polymeric hollow fiber membrane preparation, characterization and application", Sep. Purif. Technol., 111, 43-71. https://doi.org/10.1016/j.seppur.2013.03.017
  7. Hamza, A., Pham, V.A., Matsuura, T. and Santerre, J.P. (1997), "Development of membranes with low surface energy to reduce the fouling in ultrafiltration applications", J. Membr. Sci., 131(1-2), 217-227. https://doi.org/10.1016/S0376-7388(97)00050-1
  8. Kola, A., Ye, Y., Ho, A., Clech, P.L. and Chen, V. (2012), "Application of low frequency transverse vibration on fouling limitation in submerged hollow fiber membranes", J. Membr. Sci., 409-410, 54-65. https://doi.org/10.1016/j.memsci.2012.03.017
  9. Li, N., Xiao, C., An, S. and Hu, X. (2010), "Preparation and properties of PVDF/PVA hollow fiber membranes", Desalination, 250(2), 530-537. https://doi.org/10.1016/j.desal.2008.10.027
  10. Li, Q., Bi, Q.Y., Lin, H.H., Bian, L.X. and Wang, X.L. (2013), "A novel ultrafiltration (UF) membrane with controllable selectivity for protein separation", J. Membr. Sci., 427, 155-167. https://doi.org/10.1016/j.memsci.2012.09.010
  11. Liu, F., Abed, M.R.M. and Li, K. (2011), "Preparation and characterization of poly (vinylidene fluoride ) (PVDF) based ultrafiltration membranes using nano $\gamma$-$Al_{2}O_{3}$", J. Membr. Sci., 366(1-2), 97-103. https://doi.org/10.1016/j.memsci.2010.09.044
  12. Mansourizadeh, A. and Ismail, A.F. (2011), "Preparation and characterization of porous PVDF hollow fiber membranes for $CO_{2}$ absorption: Effect of different non-solvent additives in the polymer dope", Int. J. Greenh. Gas. Con., 5(4), 640-648. https://doi.org/10.1016/j.ijggc.2011.03.009
  13. Pezeshk, N. and Narbaitz, R.M. (2012), "More fouling resistance modified PVDF ultrafiltration membranes for water treatment", Desalination, 287, 247-254. https://doi.org/10.1016/j.desal.2011.11.048
  14. Sukitpaneenit, P. and Chung, T.S. (2009), "Molecular elucidation of morphology and mechanical properties of PVDF hollow fiber membranes from aspects of phase inversion, crystallization and rheology", J. Membr. Sci., 340(1-2), 192-205. https://doi.org/10.1016/j.memsci.2009.05.029
  15. Sun, A.C., Kosar, W., Zhang, Y.F. and Feng, X.S. (2013), "A study of thermodynamics and kinetics pertinent to formation of PVDF membranes by phase inversion", Desalination, 309, 156-164. https://doi.org/10.1016/j.desal.2012.10.005
  16. Tian, J.Y., Ernst, M., Cui, F. and Jekel, M. (2013), "Effect of different cations on UF membrane fouling by NOM fractions", Chem. Eng. J., 223, 547-555. https://doi.org/10.1016/j.cej.2013.03.043
  17. Wei, Y., Chu, H.Q., Dong, B.Z., Li, X., Xia, S.J. and Qiang, Z.M. (2011), "Effect of $TiO_{2}$ nanowire on PVDF ultrafiltration membrane performance", Desalination, 272(1-3), 90-97. https://doi.org/10.1016/j.desal.2011.01.013
  18. Yu, S.C., Chen, Z.W., Cheng, Q.B., Lu, Z.H., Liu, M.H. and Gao, C.J. (2012), "Application of thin-film composite hollow fiber membrane to submerged nanofiltration of anionic dye aqueous solution", Sep. Purif. Technol., 88, 121-129. https://doi.org/10.1016/j.seppur.2011.12.024
  19. Zhang, M.G., Nguyen, Q.T. and Ping, Z.H. (2009), "Hydrophilic modification of poly (vinylidene fluoride) microporous membrane", J. Membr. Sci., 327(1-2), 78-86. https://doi.org/10.1016/j.memsci.2008.11.020
  20. Zhang, L.L., He, G.H., Zhao, W., Tan, M. and Li, X.C. (2010a), "Effect of formamide additive on the structure and gas permeation performance of polyethermide membrane", Sep. Purif. Technol., 73(2), 188-193. https://doi.org/10.1016/j.seppur.2010.03.024
  21. Zhang, H., Zhao, Y.L., Wang, H.T., Zhong, W., Du, Q.G. and Zhu, X.M. (2010b), "Phase behavior of polyetherimide/benzophenone/triethylene glycol ternary system and its application for the preparation of microporous membranes", J. Membr. Sci., 354(1-2), 101-107. https://doi.org/10.1016/j.memsci.2010.02.061
  22. Zhang, L.L., He, G.H., Zhao, W., Nie, F., Li, X.C. and Tan, M. (2011), "Studies on the coating layer in a PTFPMS/PEI composite membrane for gaseous separation", J. Membr. Sci., 371(1-2), 141-147. https://doi.org/10.1016/j.memsci.2011.01.027
  23. Zou, T.F., Cai, M., Du, R.H. and Liu, J.K. (2012), "Analyzing the uncertainty of simulation results in accident reconstruction with response surface methodology", Forensic Sci. Int., 216(1-3), 49-60. https://doi.org/10.1016/j.forsciint.2011.08.016

피인용 문헌

  1. Inorganic particle enhanced polymer hollow fiber membranes with high mechanical properties vol.167, 2015, https://doi.org/10.1016/j.matchemphys.2015.10.034