참고문헌
- S. Y. Lee, B. Kim, S. D. Kim, G. Kim and Y. S. Hong," Effect of Si doping on the wear properties of CrN coatings synthesized by unbalanced magnetron sputtering", Thin Soild Films, Vol. 506-507, pp.192-196, 2006 https://doi.org/10.1016/j.tsf.2005.08.027
- Y. S. Hong and S. Y. Lee, "A comparative study of Cr-X-N(X=Zr, Si) coatings for the improvement of the low-speed torque efficiency of a hydraulic piston pump", Metals and Materials Int. Vol. 14, No.1, pp.33-40, 2008 https://doi.org/10.3365/met.mat.2008.02.033
- H. Murrenhoff, U. Piepenstock and T. Kohmascher, "Analyzing losses in hydrostatic drives", Proc. of the 7th JFPS International Symposium on Fluid Power, pp.103-108, 2008
- C. J. Hooke and Y. P. Kakoullis, "The lubrication of slippers on axial piston pumps", 5th international fluid power symposium, pp.13-26, 1978
- E. Koc and C. J. Hooke, "Investigation into the effects of orifice size, offset and overclamp ratio on the lubrication of slipper bearings", Tribology International, Vol. 29, No. 4, pp.299-305, 1996 https://doi.org/10.1016/0301-679X(95)00044-5
- J. M. Bergada, J. Watton and J. M. Haynes, "The hydrostatic/hydrodynamic behavior of an axial piston pump slipper with multiple lands", Meccanica, Vol. 45, pp.585-602, 2010 https://doi.org/10.1007/s11012-009-9277-0
- R. E. Johnson and N. D. Manring, "Translating circular trust bearings", J. Fluid Mech., Vol. 530, pp.197-212, 2005 https://doi.org/10.1017/S0022112005003782
- A. Schenk and M. Ivantysynova, "An Investigation of the impact of elastohydrodynamic deformation on power loss in the slipper swash plate interface", Proc. 8th JFPS Int. Symposium on Fluid Power, pp.228-234, 2011
- U. Wieczorek, "Ein Simulationsmodell zur Beschreibung der Spaltstroemung in Axialkolbenmaschinen der Schraegscheibenbauart", Fortschritt-Berichte VDI, Reihe7, No. 443, 2003
- O. Boinghoff, "Untersuchen zum Reibungsverhalten der Gleitschuhe in Schrägscheiben-Axial-kolbenmascinen", VDI-Forschungsheft, VDI-Verlag, Dusseldorf, Vol. 584, 1977
- S. Kobayashi, M. Hirose, J. Hatsue, and M. Ikeya, "Friction characteristics of a ball joint in the swash plate type axial piston motor", Proc. 8th International Symposium on Fluid Power, pp.565-592, 1987
- M. Kano, "DLC coating technology applied to sliding parts of automotive engine", New Diamond & Frontier Carbon Technology, Vol. 16, No.4, pp.201-210, 2006
- M. Murakawa, et. al., "Performance of a rotating gear pair coated with an amorphous carbon film under a loss-of-lubrication condition", Surface & Coatings Technology Vol. 120-121, pp.646-652, 1999 https://doi.org/10.1016/S0257-8972(99)00437-5
- Y. S. Hong and Y. C. Kwon, "Investigation on the power losses of hydrostatic piston shoe bearings for swash plate type axial piston pumps under mixed friction conditions", Proc. of the 9th Int. Fluid Power Conference, Vol. 2, pp.499-507, 2014
- Creating Nano Technologies Inc., www.creating-nanotech.com
피인용 문헌
- Performance Improvement of a Swash Plate Type Piston Pump in the Low-Speed Range by a DLC Coating vol.11, pp.4, 2014, https://doi.org/10.7839/ksfc.2014.11.4.025