한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)

  • 제15권5호
  • /
  • Pages.3100-3106
  • /
  • 2014
  • /
  • 1975-4701(pISSN)
  • /
  • 2288-4688(eISSN)
한국산학기술학회 (The Korea Academia-Industrial cooperation Society)
권호 표지
DOI QR코드

DOI QR Code

IEEE 1459-2010 규격의 정의를 이용한 다중 입력 채널을 갖는 전력 감시 시스템

Power Monitoring System with Multiple Input Channels Using the Definition of IEEE Standard 1459-2010

  • 전정채 (한국전기안전공사) ;
  • 오훈 (원광대학교 전기공학과)
  • Jeon, Jeong-Chay (Korea Electrical Safety Corporation) ;
  • Oh, Hun (Department of Electrical Engineering, WonKwang University)
  • 투고 : 2014.04.14
  • 심사 : 2014.05.08
  • 발행 : 2014.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 전력 시스템의 전원 및 부하 측을 동시에 감시가 가능한 다 채널(전압 8채널, 전류 10채널) 전력 측정 시스템을 개발하였다. 제안된 시스템은 전력품질과 관련된 규정인 IEEE 1459-2010의 정의를 사용하여 전력 성분을 계산하는 신호처리 알고리즘을 기반으로 TMS320C42 DSP를 이용하여 개발하였다. 개발된 시스템은 표준 전원 공급 장치를 이용하여 그 성능 시험을 실시하였고, 그 결과 측정오차는 0.2% 이하로 나타났다. 또한 제안된 시스템을 3상 4선식 전력시스템에 설치하여 실증 시험을 실시하여 그 성능을 입증하였다. 제안된 시스템은 상업 및 산업용 전력 시스템에 적용하여 동시에 다 채널로 전력을 측정 및 분석함으로써 전력품질과 관련된 다양한 문제를 줄일 수 있을 것이다.

This paper develops power measurement system with multiple sensor input channels (voltage-8 channels and current-10 channels) that simultaneously can monitor power components for both supply and load side of power system. The hardware implementation of the proposed system is based on TMS320C42 DSP and signal processing program algorithm to calculate power components use the definition of IEEE Standard 1459-2010 related power quality. The performance of the developed system is tested by using standard ac power source device, and the test results showed that accuracy of the developed system is less than 0.2 %. Also, field test of the proposed system in the three-phase and four-wire power system was implemented. Simultaneous multiple channel measurement and analysis of power components in commercial and industrial electrical power system using the proposed system will be necessary to reduce power quality problems.

키워드

참고문헌

  1. Giovanni Bucci, Edoardo Fiorucci, and Carmine Landi, "Digital Measurement Station for Power Quality Analysis in Distributed Environments," IEEETrans.onInstrumentationandMeasurement,Vol.52,N o.1, pp.75-84, February 2003 DOI: http://dx.doi.org/10.1109/TIM.2003.809080
  2. The report of IEEE Task Force, "Effects of harmonics on equipment," IEEETrans.onPowerDelivery,Vol.8,No.2, pp. 672-680 , April 1993 https://doi.org/10.1109/61.216874
  3. IEEE Std. 1159-1995, "IEEE Recommended Practice on Monitoring Electric Power Quality"
  4. J. Arrillaga, N. R. Watson and S. Chen, "Power System Quality Assessment," WILEY, January, 2001
  5. P. Daponte, M. Di Penta, and G. Mercurio, "TransientMeter: A Distributed Measurement System for Power Quality Monitoring," IEEE Trans. on Power Delivery, Vol. 19, No. 2,pp.456-462, April 2004 DOI: http://dx.doi.org/10.1109/TPWRD.2004.825200
  6. A. E. Emanual, "Summary of IEEE Standard 1459: Definitions for the measurement of electric power quantities Under Sinusoidal, Non sinusoidal, Balanced, or Unbalanced Conditions," IEEE Trans. on Industrial Application. Vol. 40, No. 3, pp. 869-876, May 2004 DOI: http://dx.doi.org/10.1109/TIA.2004.827452
  7. Vladimir V. TerziJa, Vladimir stanojevic, Marjan Popov and Lou van der Sluis, "Digital Metering of Power Components According to IEEE Standard 1459-2000 Using the Newton-Type Algorithm," IEEE Trans. on Instrumentation and Measurement, Vol. 56, No. 6, pp.2717-2724 , December 2007 DOI: http://dx.doi.org/10.1109/TIM.2007.908235
  8. IEEE Std. 1459-2010., "Definitions for the Measurement of Electric Power Quantities under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions" DOI: http://dx.doi.org/10.1109/IEEESTD.2010.5439063
  9. S.-K Shin, B.-J. Lee, D.-W. Jang, K.-S. Kim, "Radio Propagation Characteristics Analysis for Various Receiving Environments of Satellite Communication on Ka-band", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 13, No. 1, pp. 221-227, 2013. DOI: http://dx.doi.org/10.7236/JIIBC.2013.13.1.215
  10. S.-T. Kim, "Information System of Smart u-LED Lighting Energy based on Zigbee Mesh Network", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 13, No. 5, October 2013. DOI: http://dx.doi.org/10.7236/JIIBC.2013.13.5.77
  11. H.-C. Song, S.-H. Hwang, "Analysis of Packet Transmission Delay in the DC Power-Line Fault Management System using IEEE 802.15.4", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 14, No. 1, pp.259-264, Feb. 28, 2014. DOI: http://dx.doi.org/10.7236/JIIBC.2014.14.1.259
  12. B.-J. Lee, Y.-W. Kim, K.-S. Kim, "Received Power Optimization applying Adaptive Genetic Algorithm in Visible light communication", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 13, No. 6, December 2013. DOI: http://dx.doi.org/10.7236/JIIBC.2013.13.6.147
  13. M.-H. Kim, N.-G. Lee, "Implementation of Electricity Power Management System for Industries based on USN", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 12, No. 4, August 2012. DOI: http://dx.doi.org/10.7236/JIWIT.2012.12.4.103