DOI QR코드

DOI QR Code

Free vibration analysis of thick CGFR annular sector plates resting on elastic foundations

  • Tahouneh, Vahid (Department of Mechanical Engineering, Islamshahr Branch, Islamic Azad University)
  • 투고 : 2013.04.07
  • 심사 : 2014.04.04
  • 발행 : 2014.06.25

초록

This paper deals with free vibration analysis of continuous grading fiber reinforced (CGFR) and bi-directional FG annular sector plates on two-parameter elastic foundations under various boundary conditions, based on the three-dimensional theory of elasticity. The plates with simply supported radial edges and arbitrary boundary conditions on their circular edges are considered. A semi-analytical approach composed of differential quadrature method (DQM) and series solution is adopted to solve the equations of motion. Some new results for the natural frequencies of the plate are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. Results indicate that the non-dimensional natural frequency parameter of a functionally graded fiber volume fraction is larger than that of a discrete laminated and close to that of a 2-layer. It results that the CGFR plate attains natural frequency higher than those of traditional discretely laminated composite ones and this can be a benefit when higher stiffness of the plate is the goal and that is due to the reduction in spatial mismatch of material properties. Moreover, it is shown that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional one-dimensional functionally graded material. The multidirectional graded material can likely be designed according to the actual requirement and it is a potential alternative to the unidirectional functionally graded material. The new results can be used as benchmark solutions for future researches.

키워드

참고문헌

  1. Benveniste, Y. (1987), "A new approach to the application of Mori-Tanaka's theory of composite materials", Mech. Mater., 6(2), 147-157. https://doi.org/10.1016/0167-6636(87)90005-6
  2. Bert, C.W. and Malik, M. (1996), "Differential quadrature method in computational mechanics, a review", Appl. Mech. Rev., 49(1), 1-28. https://doi.org/10.1115/1.3101882
  3. Cheng, Z.Q. and Batra, R.C. (2000), "Exact correspondence between eigenvalues of membranes and functionally graded simply supported polygonal plates", J. Sound Vib., 229(4), 879-895. https://doi.org/10.1006/jsvi.1999.2525
  4. Cheng, Z.Q. and Kitipornchai, S. (1999), "Membrane analogy of buckling and vibration of inhomogeneous plates", J. Eng. Mech., 125(11), 1293-1297. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:11(1293)
  5. Hosseini-Hashemi, S., Akhavan, H., Rokni Damavandi Taher, H., Daemi, N. and Alibeigloo, A. (2010a), "Differential quadrature analysis of functionally graded circular and annular sector plates on elastic foundation", Mater. Des., 31(4), 1871-1880. https://doi.org/10.1016/j.matdes.2009.10.060
  6. Hosseini-Hashemi, S., Rokni Damavandi Taher, H. and Akhavan, H. (2010b), "Vibration analysis of radially FGM sectorial plates of variable thickness on elastic foundations", Compos. Struct., 92(7), 1734-1743. https://doi.org/10.1016/j.compstruct.2009.12.016
  7. Houmat, A. (2004), "Three-dimensional hierarchical finite element free vibration analysis of annular sector plates", J. Sound Vib., 276(1-2), 181-193. https://doi.org/10.1016/j.jsv.2003.07.020
  8. Kim, C.S. and Dickinson, S.M. (1989), "On the free, transverse vibration of annular and circular, thin, sectorial plates subjected to certain complicating effects", J. Sound Vib., 134(3), 407-421. https://doi.org/10.1016/0022-460X(89)90566-X
  9. Liew, K.M. and Lam, K.Y. (1993), "On the use of 2-d orthogonal polynomials in the Rayleigh-Ritz method for flexural vibration of annular sector plates of arbitrary shape", Int. J. Mech. Sci., 35(2), 129-139. https://doi.org/10.1016/0020-7403(93)90071-2
  10. Liew, K.M., Ng, T.Y. and Wang, B.P. (2001), "Vibration of annular sector plates from three-dimensional analysis", J. Acoust. Soc. Am., 110(1), 233-242. https://doi.org/10.1121/1.1377868
  11. Lu, C.F., Chen, W.Q., Xu, R.Q. and Lim, C.W. (2008), "Semi-analytical elasticity solutions for bi-directional functionally graded beams", Int. J. Solid. Struct., 45(1) 258-275.
  12. Lu, C.F., Lim, C.W. and Chen, W.Q. (2009), "Semi-analytical analysis for multi-directional functionally graded plates: 3-D elasticity solutions", Int. J. Num. Meth. Eng., 79(1), 25-44. https://doi.org/10.1002/nme.2555
  13. McGee, O.G., Huang, C.S. and Leissa, A.W. (1995), "Comprehensive exact solutions for free vibrations of thick annular sectorial plates with simply supported radial edges", Int. J. Mech. Sci., 37(5), 537-566. https://doi.org/10.1016/0020-7403(94)00050-T
  14. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall., 21(5), 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  15. Mukhopadhyay, M. (1979), "A semi-analytic solution for free vibration of annular sector plates", J. Sound Vib., 63(1), 87-95. https://doi.org/10.1016/0022-460X(79)90379-1
  16. Mukhopadhyay, M. (1982), "Free vibration of annular sector plates with edges, possessing different degrees of rotational restraints", J. Sound Vib., 80(2), 275-279. https://doi.org/10.1016/0022-460X(82)90196-1
  17. Nie, G.J. and Zhong, Z. (2008), "Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges", Compos. Struct., 84(2), 167-176. https://doi.org/10.1016/j.compstruct.2007.07.003
  18. Nie, G.J. and Zhong, Z. (2010), "Dynamic analysis of multi-directional functionally graded annular plates", Appl. Math. Modell., 34(3), 608-616. https://doi.org/10.1016/j.apm.2009.06.009
  19. Pelletier Jacob, L. and Vel Senthil, S. (2006), "An exact solution for the steady state thermo- elastic response of functionally graded orthotropic cylindrical shells", Int. J. Solid Struct., 43(5), 1131-1158. https://doi.org/10.1016/j.ijsolstr.2005.03.079
  20. Ramakris, R. and Kunukkas, V.X. (1973), "Free vibration of annular sector plates", J. Sound Vib., 30(1), 127-129. https://doi.org/10.1016/S0022-460X(73)80055-0
  21. Shen, H.S. (2009), "A comparison of buckling and post buckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators", Compos. Struct., 91(3), 375-384. https://doi.org/10.1016/j.compstruct.2009.06.005
  22. Shu, C. and Wang C.M. (1999), "Treatment of mixed and non-uniform boundary conditions in GDQ vibration analysis of rectangular plates", Eng. Struct., 21(2), 125-134. https://doi.org/10.1016/S0141-0296(97)00155-7
  23. Srinivasan, R.S. and Thiruvenkatachari, V. (1983), "Free vibration of annular sector plates by an integral equation technique", J. Sound Vib., 89(3), 425-432. https://doi.org/10.1016/0022-460X(83)90546-1
  24. Srinivasan, R.S. and Thiruvenkatachari, V. (1986), "Free vibration analysis of laminated annular sector plates", J. Sound Vib., 109(1), 89-96. https://doi.org/10.1016/S0022-460X(86)80024-4
  25. Tahouneh, V. and Yas, M.H. (2012), "3-D free vibration analysis of thick functionally graded annular sector plates on Pasternak elastic foundation via 2-D differential quadrature method", Acta Mech., 223(9), 1879-1897. https://doi.org/10.1007/s00707-012-0648-6
  26. Tahouneh, V. and Yas, M.H. (2013), "Influence of equivalent continuum model based on the Eshelby-Mori-Tanaka scheme on the vibrational response of elastically supported thick continuously graded carbon nanotube-reinforced annular plates", Polym. Compos., DOI:10.1002/pc.22818.
  27. Valery, V., Vasiliev E. and Morozov, V. (2001), Mechanics and Analysis of Composite Materials, First Edition, Elsevier Science Ltd.
  28. Vel, S.S. (2010), "Exact elasticity solution for the vibration of functionally graded anisotropic cylindrical shells", Compos. Struct., 92(11), 2712-2727. https://doi.org/10.1016/j.compstruct.2010.03.012
  29. Vel, S.S. and Batra, R.C. (2002), "Exact solution for thermoelastic deformations of functionally graded thick rectangular plates", AIAA J., 40(7), 1421-1433. https://doi.org/10.2514/2.1805
  30. Yang, J. and Shen, H.S. (2001), "Dynamic response of initially stressed functionally graded rectangular thin plates", Compos. Struct., 54(4), 497-508. https://doi.org/10.1016/S0263-8223(01)00122-2
  31. Yang, J. and Shen, H.S. (2003), "Non-linear analysis of functionally graded plates under transverse and inplane loads", Int. J. Nonlin. Mech., 38(4), 467-482. https://doi.org/10.1016/S0020-7462(01)00070-1
  32. Yas, M.H. and Tahouneh, V. (2012), "3-D free vibration analysis of thick functionally graded annular plates on Pasternak elastic foundation via differential quadrature method (DQM)", Acta Mech., 223(1), 43-62. https://doi.org/10.1007/s00707-011-0543-6
  33. Zhou, D., Cheung, Y.K., Lo, S.H. and Au, F.T.K. (2004), "Three-dimensional vibration analysis of rectangular thick plates on Pasternak foundation", Int. J. Numer. Method. Eng., 59(10), 1313-1334. https://doi.org/10.1002/nme.915
  34. Zhou, D., Lo, S.H. and Cheung, Y.K. (2009), "3-D vibration analysis of annular sector plates using the Chebyshev-Ritz method", J. Sound Vib., 320(1-2), 421-437. https://doi.org/10.1016/j.jsv.2008.08.001
  35. Zhou, D., Lo, S.H., Au, F.T.K. and Cheung, Y.K. (2006), "Three-dimensional free vibration of thick circular plates on Pasternak foundation", J. Sound Vib., 292(3-5), 726-741. https://doi.org/10.1016/j.jsv.2005.08.028

피인용 문헌

  1. Using an equivalent continuum model for 3D dynamic analysis of nanocomposite plates vol.20, pp.3, 2016, https://doi.org/10.12989/scs.2016.20.3.623
  2. The effect of multi-directional nanocomposite materials on the vibrational response of thick shell panels with finite length and rested on two-parameter elastic foundations vol.8, pp.1, 2016, https://doi.org/10.1007/s40091-016-0110-4
  3. 3D free vibration analysis of elastically supported thick nanocomposite curved panels with finite length and different boundary conditions via 2D GDQ method vol.23, pp.10, 2016, https://doi.org/10.1080/15376494.2015.1068402
  4. Vibrational analysis of sandwich sectorial plates with functionally graded sheets reinforced by aggregated carbon nanotube pp.1530-7972, 2020, https://doi.org/10.1177/1099636218785972
  5. The effect of carbon nanotubes agglomeration on vibrational response of thick functionally graded sandwich plates vol.24, pp.6, 2014, https://doi.org/10.12989/scs.2017.24.6.711
  6. Dynamic behaviour of thick plates resting on Winkler foundation with fourth order element vol.16, pp.3, 2014, https://doi.org/10.12989/eas.2019.16.3.359
  7. Dynamic Analysis of Thick Plates Resting on Winkler Foundation Using a New Finite Element vol.44, pp.1, 2014, https://doi.org/10.1007/s40996-019-00260-4