DOI QR코드

DOI QR Code

Thermal-pressure loading effect on containment structure

  • Kwak, Hyo-Gyoung (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Kwon, Yangsu (Department of Civil Engineering, Korean Advanced Institute for Science and Technology)
  • 투고 : 2013.12.06
  • 심사 : 2014.03.19
  • 발행 : 2014.06.10

초록

Because the elevated temperature degrades the mechanical properties of materials used in containments, the global behavior of containments subjected to the internal pressure under high temperature is remarkably different from that subjected to the internal pressure only. This paper concentrates on the nonlinear finite element analyses of the nuclear power plant containment structures, and the importance for the consideration of the elevated temperature effect has been emphasized because severe accident usually accompanies internal high pressure together with a high temperature increase. In addition to the consideration of nonlinear effects in the containment structure such as the tension stiffening and bond-slip effects, the change in material properties under elevated temperature is also taken into account. This paper, accordingly, focuses on the three-dimensional nonlinear analyses with thermal effects. Upon the comparison of experiment data with numerical results for the SNL 1/4 PCCV tested by internal pressure only, three-dimensional analyses for the same structure have been performed by considering internal pressure and temperature loadings designed for two kinds of severe accidents of Saturated Station Condition (SSC) and Station Black-out Scenario (SBO). Through the difference in the structural behavior of containment structures according to the addition of temperature loading, the importance of elevated temperature effect on the ultimate resisting capacity of PCCV has been emphasized.

키워드

참고문헌

  1. Anderberg, Y. (1988), "Modelling steel behavior", Fire Saf. J., 13(1), 17-26. https://doi.org/10.1016/0379-7112(88)90029-X
  2. Anderberg, Y. and Thelandersson, S. (1976), Stress and Deformation Characteristics of Concrete at High Temperatures. 2. Experimental Investigation and Material Behavior Model, Bulletin of Division of Structural Mechanics and Concrete Construction, Bulletin 54.
  3. Bazant, Z.P. and Kaplan, M.F. (1996), Concrete at High Temperature, Material Properties and Mathematical Models, Longman Group Limited, Essex, England.
  4. Comite Euro-International du Beton (CEB) and Federation International de la Prestressing (FIP) (1990), CEB-FIP Model Code for Concrete Structures, Thomas Telford.
  5. Cruz, C.R. (1968), Apparatus for Measuring Creep of Concrete at High Temperatures, Portland Cement Association, Shokie, Illinois, Report, No. 225, 36-42.
  6. Dameron, R.A., Hansen, B.E., Parker, D.R., Rashid, Y.R., Hessheimer, M. and Costello, J.F. (2003), Posttest Analysis of the NUPEC/NRC 1:4 Scale Prestressed Concrete Containment Vessel Model, NUREG/CR-6809, SAND2003-0839P, ANA-01-0330. San Diego, CA, ANATECH Corporation, Albuquerque, NM, Sandia National Laboratories.
  7. Dassault Systemes Simulia Corp. (2010), Abaqus User's Manual, Version 6.10, Rhode Island, USA.
  8. Davie, C.T., Pearce, C.J. and Bicanc, N. (2014), "Fully coupled, hygro-thermo-mechanical sensitivity analysis of a pre-stressed concrete pressure vessel", Eng. Struct., 59, 536-551. https://doi.org/10.1016/j.engstruct.2013.10.033
  9. Dong, Q., Li, Q.M. and Zheng, J.Y. (2010), "Further study on strain growth in spherical containment vessels subjected to internal blast loading", Int. J. Impact Eng., 37(2), 196-206. https://doi.org/10.1016/j.ijimpeng.2009.09.001
  10. Donten, K., Knauff, M., Sadowski, A. and Scibak, W. (1980), "Tests on a model of prestressed reactor containment", Arch. Civ. Mech. Eng., 26(1), 231-245.
  11. Eurocode 2 (2004), Design of Concrete Structures. Part 1-2: General Rules-Structural Fire Design, EN 1992-1-2, Commission of European Communities, Brussels.
  12. Harmathy, T.Z. (1993), Fire safety design and concrete, Longman Scientific and Technical, Harlow.
  13. Hessheimer, M.F. and Dameron, R.A. (2006), Containment Integrity Research at Sandia National Laboratories, Division of Fuel, Engineering and Radiological Research, Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission.
  14. Hessheimer, M.F., Shibata, S. and Costello, J.F. (2002), Results of Overpressurization Test of a 1: 4-Scale Prestressed Concrete Containment Vessel Model, The ASME Foundation, Inc., Three Park Avenue, New York, NY 10016-5990 (United States).
  15. Hu, H.T. and Lin, Y.H. (2006), "Ultimate analysis of PWR prestressed concrete containment subjected to internal pressure", Int. J. Pres. Ves. Pip., 83(3), 161-167. https://doi.org/10.1016/j.ijpvp.2006.02.030
  16. Kevrokian, S., Heinfling, G. and Courtois, A. (2005), "Prediction of containment vessel mock up cracking during over design pressure test", Proceedings of Transactions of the 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), Beijing, China.
  17. Kodur, V., Dwaikat, M. and Fike, R. (2010), "High-temperature properties of steel for fire resistance modeling of structures", J. Mater. Civil Eng., 22(5), 423-434. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000041
  18. Kupfer, H.B. and Gerstle, K.H. (1973), "Behavior of concrete under biaxial stresses", J. Eng. Mech. ASCE, 99(4), 853-866.
  19. Kwak, H.G. and Kim, D.Y. (2004a), "Material nonlinear analysis of RC shear walls subject to monotonic loadings", Eng. Struct., 26(11), 1517-1533. https://doi.org/10.1016/j.engstruct.2004.05.013
  20. Kwak, H.G. and Kim, D.Y. (2004b), "Material nonlinear analysis of RC shear walls subject to cyclic loadings", Eng. Struct., 26(10), 1423-1436. https://doi.org/10.1016/j.engstruct.2004.05.014
  21. Kwak, H.G. and Kim, D.Y. (2006a), "Cracking behavior of RC panels subject to biaxial tensile stresses", Comput. Struct., 84(5), 305-317. https://doi.org/10.1016/j.compstruc.2005.09.020
  22. Kwak, H.G. and Kim, J.H. (2006b), "Numerical models for prestressing tendons in containment structures", Nucl. Eng. Des., 236(10), 1061-1080. https://doi.org/10.1016/j.nucengdes.2005.10.010
  23. Lee, H.P. (2011), "Shell finite element of reinforced concrete for internal pressure analysis of nuclear containment building", Nucl. Eng. Des., 241(2), 515-525. https://doi.org/10.1016/j.nucengdes.2010.11.008
  24. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech. ASCE, 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  25. Lie, T.T. and Chabot, M. (1990), "A method to predict the fire resistance of circular concrete filled hollow steel columns", J. Fire Prot. Eng., 2(4), 111-124. https://doi.org/10.1177/104239159000200402
  26. Lie, T.T. and Lin, T.D. (1985), "Fire performance of reinforced concrete columns", ASTM STP, 882, 176-205.
  27. McGregor, J.G., Simmonds, S.H. and Rizkalla, S.H. (1980), "Test of a prestressed secondary containment structure", Struct. Eng. Rep. Department of Civil Engineering, University of Alberta, Edmonton, Canada.
  28. Mathet, E., Hessheimer, M.F., Ali, S. and Tegeler, B. (2005), "An international standard problem: analysis of 1: 4-scale prestressed concrete containment vessel model under severe accident conditions", Proceedings of 18th International Conference on Structural Mechanics in Reactor Technology, SMiRT (Vol. 18), Beijing, China.
  29. Nahas, G. and Ciree, B. (2007), "Mechanical analysis of the containment building behavior for the French, PWR 900 MWe under severe accident", Proceedings of 19th International Conference on Structural Mechanics in Reactor Technology. SMiRT (Vol. 19), Toronto, USA.
  30. Noh, S.H., Moon, I.H., Lee, J.B. and Kim, J.H. (2008), "Analysis of Prestressed Concrete Containment Vessel (PCCV) under severe accident loading", Nucl. Eng. Technol., 40(1), 77. https://doi.org/10.5516/NET.2008.40.1.077
  31. Parmar, R.M., Singh, T., Thangamani, I., Trivedi, N. and Singh, R.K. (2013), "Over-pressure test on BARCOM pre-stressed concrete containment", Nucl. Eng. Des., 269(1), 177-183.
  32. Phan, L.T. and Carino, N.J. (1998), "Review of mechanical properties of HSC at elevated temperature", J. Mater. Civil Eng., 10(1), 58-65. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58)
  33. Rizkalla, S.H., Simmonds, S.H. and MacGregor, J.G. (1984), "Prestressed concrete containment model", J. Struct. Eng. ASCE, 110(4), 730-743. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:4(730)
  34. Schaffer, E.L. (1992), Structural Fire Protection, ASCE.
  35. Schneider, U. (1988), "Concrete at high temperatures-a general review", Fire Saf. J., 13(1), 55-68. https://doi.org/10.1016/0379-7112(88)90033-1
  36. Twidale, D. and Crowder, R. (1991), "Sizewell "B"-a one tenth scale containment model test for the UK PWR programme", Nucl. Eng. Des., 125(1), 85-93. https://doi.org/10.1016/0029-5493(91)90008-6
  37. Yonezawa, K., Imoto, K., Watanabe, Y. and Akimoto, M. (2002), "Ultimate capacity analysis of 1/4 PCCV model subjected to internal pressure", Nucl. Eng. Des., 212(1), 357-379. https://doi.org/10.1016/S0029-5493(01)00498-8