DOI QR코드

DOI QR Code

Experimental and numerical studies on seismic behaviour of exterior beam-column joints

  • Asha, P. (Department of Civil Engineering, St. Peter's University) ;
  • Sundararajan, R. (Government College of Technology)
  • 투고 : 2011.12.30
  • 심사 : 20130431
  • 발행 : 2014.02.25

초록

A nonlinear finite element analysis using ANSYS is used to evaluate the seismic behavior of reinforced concrete exterior beam-column joints. The behavior of the finite element models under cyclic loading is compared with the experimental results. Two beam-column joint specimens (SH and SHD) with square hoop confinement in joint and throughout the column with detailing as per IS 13920 are studied. The specimen SHD was provided with additional diagonal bars from column to beam to relocate the plastic hinge formation from beam-column interface. The load-displacement relationship, joint shear stress and strain in beam obtained from numerical study showed good agreement with the experimental results. This investigation proves that seismic behaviour of reinforced concrete beam-column joints under reversed cyclic loading can be evaluated successfully using finite element modeling and analysis.

키워드

참고문헌

  1. Alameddine, F. and Ehsani, M.R. (1991), "High strength RC connections subjected to inelastic cyclic loading", ASCE J. Strcut. Eng., 117(3), 829-850. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:3(829)
  2. Baglin, P.S. and Scott, R.H. (2000), "Finite element modeling of reinforced concrete beam-column connections", ACI Struct. J., 97(6), 886-894.
  3. Bindhu, K.R. and Jaya, K.P. (2010), "Strength and behaviour of exterior beam-column joints with diagonal crossing bars", Asian J. Civil Eng., 11(3), 397-410.
  4. Desayi, P. and Krishnan, S., (1964), "Equation for the stress-strain curve of concrete", ACI Struct. J., 61, 345-350.
  5. Eshghi, S. and Farrokhi, H. (2003), "Seismic vulnerability analysis of airport traffic control towers", J. Seismol. Earthq. Eng., Spring, 5(1), 31-40.
  6. Fattah, B.A. and Wight, J.K. (1987), "Study of moving beam plastic hinging zones for earthquake-resistant design of R/C buildings", ACI Struct. J., 84(1), 31-39.
  7. Hegger, J., Sheriff, A. and Roeser, W. (2004), "Nonlinear finite element analysis of reinforced concrete beam-column connections", ACI Struct. J., 10(5), 604-614.
  8. Li B, Wu, Y. and Tso, C.P. (2003), "Seismic behavior of non-seismically detailed interior beam-wide column joints-part II: theoretical comparisons and analytical studies", ACI Struct. J., 100(1), 56-65.
  9. Murty, C.V.R., Rai, D.C., Bajpai, K.K. and Jain, S.K. (2003), "Anchorage details and joint design in seismic RC frames", The Indian Concrete J., 75(4), 274-280.
  10. Rajagopal, S. and Prabavathy, S. (2013), "Study of exterior beam-column joint with different joint core and anchorage details under reversal loading", Struct. Eng. Mech., 46(6), 809-825. https://doi.org/10.12989/sem.2013.46.6.809
  11. Zhou, H. and Zhang, Z. (2012), "Interaction of internal forces of exterior beam-column joints of reinforced concrete frames under seismic action", Struct. Eng. Mech., 44(2), 197-217. https://doi.org/10.12989/sem.2012.44.2.197
  12. MacGregor, J. (1992), Reinforced Concrete Mechanics and Design, Third Edition, Prentice Hall, Upper Saddle River, New Jersey
  13. Moehle, J.P. and Mahin, S.A. (1991), "Observations on the behavior of reinforced concrete buildings during earthquakes", Earthquake-Resistant Concrete Structures Inelastic Response and Design SP-127, American Concrete Institute, S.K. Ghosh (Editor), Detroit, Michigan, 67-89.
  14. William, K.J. and Warnke, E.P. (1974), "Constitutive model for triaxial behaviour of concrete", Seminar on concrete structures subjected to triaxial stresses, International Association of Bridge and Structural Engineering Conference, Bergamo, Italy.
  15. Wolanski, A.J. (2004), "Flexural Behavior of Reinforced and Prestressed Concrete Beams using Finite Element Analysis", Master's Thesis, Marquette University, Milwaukee, Wisconsin.
  16. IS 13920 (1993), Indian Standard Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces-Code of Practice, New Delhi..
  17. IS 1893 (Part 1) (2002), Indian Standard Criteria for Earthquake Resistant Design of Structures, Part-1, General Provisions and Buildings, New Delhi..
  18. IS 456 (2000), Indian Standard Plain and Reinforced Concrete Code of Practice, New Delhi.
  19. ANSYS10.0 (1995), ANSYS Users manual, (ANSYS, Inc.), Canonsburg.

피인용 문헌

  1. Seismic behavior of reinforced concrete exterior beam-column joints strengthened by ferrocement composites vol.9, pp.1, 2015, https://doi.org/10.12989/eas.2015.9.1.233
  2. Component method model for predicting the moment resistance, stiffness and rotation capacity of minor axis composite seat and web site plate joints vol.20, pp.3, 2016, https://doi.org/10.12989/scs.2016.20.3.469
  3. Performance of double reinforced concrete panel against blast hazard vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.807
  4. Numerical model to simulate shear behaviour of RC joints and columns vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.877
  5. Performance of double reinforced concrete panel against blast hazard vol.18, pp.4, 2014, https://doi.org/10.12989/cac.2016.18.4.807
  6. Numerical model to simulate shear behaviour of RC joints and columns vol.18, pp.4, 2014, https://doi.org/10.12989/cac.2016.18.4.877