Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Static/Dynamic Stability for the Structure of a Mill Turret with a B-Axis Tilting Facility

B축 회전 기능을 갖춘 복합공구대 구조물의 정/동적 안정성에 관한 연구

  • Kang, Seung-Hee (Dept. of Mechanical Eng., Graduated School of Changwon National UNIV.) ;
  • Kim, Chae-Sil (Dept. of Mechanical Eng., Changwon National UNIV.)
  • 강승희 (창원대학교 대학원 기계공학전공) ;
  • 김재실 (창원대학교 기계공학부)
  • Received : 2014.02.10
  • Accepted : 2014.02.24
  • Published : 2014.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Techniques of tool posts are developing such that variable machining is possible using only one machine for the complication of a product's shape and to reduce the machining time. In order to develop a mill turret with a variable machining function with the mounting of mill turret units on a B-axis tilting table, we determine the static/dynamic stability of the structure of the mill turret. To this end, a static structural analysis and a modal analysis were conducted. From the results of the static structural analysis, the maximum stress was found to be less than the allowable stress. By the comparing the results of the modal analysis of the excitation frequencies of the mill turret, there were no resonance regions found. Therefore, the mill turret with the B-axis tilting facility is shown to have good structural integrity.

Keywords

References

  1. C. S. Kim, J. H. Choi, and J. U. Kim. "A Study on Design and Technique Trend of Indexing Table" Journal of KSMTE, 19(2), pp. 141-146, 2010.
  2. C. S. Kim, S. T. Kim, S. Y. Cho, and H. H. Jung, "The Effect of Gear Contact Stiffnesses on the Vibration of Torsional Geared Systems for a Mill Turret" Journal of the KSMPE, 8(2), pp. 32-39, 2009.
  3. C. S. Kim, J. H. Choi, and J. H. Park, "Structural Stability Analysis of the Rotary Table for a B-axis Mill Turret", Proceedings of KSMPE, pp. 145-146, 2010.5.
  4. J. H. Choi, C. S. Kim, and S. Y. Cho, "A Study on the Relationship between the Cutting Force and the Critical Ejecting Distance of Disk for a Mill Turret", Journal of the KSMPE, 12(1), pp. 110-116, 2013.
  5. G. S. Kim, C. M. Lee, and T. H. Lee, "A Study on the Rotational Accuracy Measurement of Tilting Index Table", Proceedings of KSMPE, pp. 47, 2011.11.
  6. D. H. Kim, C. M. Choi, and H. J. Choi, "Static and Dynamic Analysis and Optimization Design of 40,000-rpm High-Speed Spindle for Machine Tools", Trans. Korean Soc. Mech. Eng. A, 37(1), pp. 105-111, 2013. https://doi.org/10.3795/KSME-A.2013.37.1.105
  7. C. H. Lee, H. S. Lee, and ISIDA, "Static and Dynamic Behaviour Analysis for High Speed Table and Column", Proceedings of KSPE, pp.1103-1107, 1998.10.
  8. S. I. Kim, J. W. Cho, W. J. Lee, and Y. H. Lee, "Static/Dynamic/Thermal Characteristics Analysis of a High-Speed Spindle System with 50,000rpm", Proceedings of KSMTE, pp. 494-499, 2003.05.
  9. Singiresu S. Rao, Mechanical Vibrations, Prentice Hall, 2004.
  10. J. E. Shigley, C. R. Mischke, and R. G. Budynas, Mechanical Engineering Design, McGraw-Hill, 2006.
  11. TSNE, ANSYS Workbench Training Manual WB Mechanical Basic, Gyalim, 2012.
  12. TSNE, ANSYS Workbench Training Manual v12.0 WB Mechanical Vibration, Gyalim, 2009.
  13. J. S. Song, AUTODESK INVENTOR Advance Course, Chungdam Books, 2014.

Cited by

  1. 복합공구대용 B축 회전테이블 웜 기어의 정/동적 안정성 및 피로에 관한 연구 vol.13, pp.5, 2014, https://doi.org/10.14775/ksmpe.2014.13.5.107
  2. 항공기용 2단 차동 GRA 개발 vol.15, pp.6, 2014, https://doi.org/10.14775/ksmpe.2016.15.6.115
  3. 선반 구조변경을 위한 현장용 공구대 강성계산모델 vol.16, pp.5, 2014, https://doi.org/10.14775/ksmpe.2017.16.5.019
  4. 고강도 경량화 산업용 풀리 개발을 위한 이종접합 사출풀리 제작에 관한 연구 vol.18, pp.6, 2014, https://doi.org/10.14775/ksmpe.2019.18.6.076