참고문헌
- D. S. Baik and S. W. Lee, "The Performance Test of SCR System in a Heavy-duty Diesel Engine," Transactions of KSAE, Vol.16, No.6, pp.19-25, 2008.
- T. K. Kim, Y. M. Sung, S. H. Han, S. J. Ha, G. M. Choi and D. J. Kim, "Effect of Mixer Structure on Turbulence and Mixing with Urea-water Solution in Marine SCR System," Journal of KSME, Vol.36, No.6, pp.814-822, 2012. https://doi.org/10.5916/jkosme.2012.36.6.814
- T. Thurnheer, D. Edenhauser, P. Soltic, D. Schreiber, P. Kirchen and A. Sankowski, "Experimental Investigation on Different Injection Strategies in a Heavy-duty Diesel Engine: Emissions and Loss Analysis," Energy Conversion and Management, Vol.52, No.1, pp.457-467, 2011. https://doi.org/10.1016/j.enconman.2010.06.074
- J. M. Desantes, J. Benajes, S. Molina and C. A. Gonzalez, "The Modification of the Fuel Injection Rate in Heavy-duty Diesel Engines. Part 1: Effects on Engine Performance and Emissions," Applied Thermal Engineering, Vol.24, No.17, pp.2701-2714, 2004. https://doi.org/10.1016/j.applthermaleng.2004.05.003
- Y. Mingfa, W. Hu, Z. Zunqing and Y. Yan, "Experimental Study of Multiple Injections and Coupling Effects of Multi-injection and EGR in a HD Diesel Engine," SAE 2009-01-2807, 2009.
- C. D. Rakopoulos, D. T. Hountalas and N. Agaliotis, "Application of a Multi-zone Combustion Model for the Prediction of Large Scale Marine Diesel Engines Performance and Pollutants Emissions," SAE 1999-01-0227, 1999.
- S. J. Charlton, "Developing Diesel Engines to Meet Ultra-low Emission Standards," SAE 2005-01-3628, 2005.
- R. Mobasheri, Z. Peng and S. M. Mirsalim, "Analysis the Effect of Advanced Injection Strategies on Engine Performance and Pollutant Emissions in a Heavy Duty DI-diesel Engine by CFD Modeling," Heat and Fluid Flow, Vol.33, No.1, pp.59-69, 2012. https://doi.org/10.1016/j.ijheatfluidflow.2011.10.004
- M. Bobba, M. Musculus and W. Neel, "Effect of Post Injections on In-cylinder and Exhaust Soot for Low-temperature Combustion in a Heavyduty Diesel Engine," SAE 2010-01-0612, 2010.
- F. Tao, V. I. Golovitchev and J. Chemiak, "Self-ignition and Early Combustion Process of n-Heptane Sprays under Diluted Air Conditions: Numerical Studies Based on Detailed Chemistry," SAE 2000-01-2931, 2000.
- R. Lebas, T. Menard, P. A. Beau, A. Berlemont and F. X. Demoulin, "Numerical Simulation of Primary Break-up and Atomization : DNS and Modelling Study," International Journal of Multiphase Flow, Vol.35, No.3, pp.247-260, 2009. https://doi.org/10.1016/j.ijmultiphaseflow.2008.11.005
- W. N. Park, J. Y. Lee, K. D. Min, J. Yu, S. G. Park and S. H. Cho, "Prediction of Real-time NO Based on the In-cylinder Pressure in Diesel Engines," Proceedings of the Combustion Institute, Vol.34, No.2, pp.3075-3082, 2013. https://doi.org/10.1016/j.proci.2012.06.170
- R. D. Reitz and R. Diwakar, "Effect of Drop Breakup on Fuel Sprays," SAE 860469, 1986.
- V. Rao and D. Honnery, "A Comparison of Two NOx Prediction Schemes for Use in Diesel Engine Thermodynamic Modelling," Fuel, Vol.107, pp.662-670, 2013. https://doi.org/10.1016/j.fuel.2013.01.071
- M. C. Drake and R. J. Blint, "Relative Importance of Nitric Oxide Formation Mechanisms in Laminar Opposed-flow Diffusion Flames," Combustion and Flame, Vol.83, Issues 1-2, pp.185-203, 1991. https://doi.org/10.1016/0010-2180(91)90212-T
- X. Cheng, C. F. Fangqin and S. Dong, "Study on Soot Formation Characteristics in the Diesel Combustion Process Based on an Improved Detailed Soot Model," Energy Conversion and Management, Vol.75, pp.1-10, 2013.
- A. S. Dederichs, Flamelet Modelling of Soot Formation in Diffusion Flames, Ph. D. Dissertation, Lund University, Lund, 2004.
- J. G. Lee and H. C. Choi, "A Dynamic Global Subgrid-scale Model for Large Eddy Simulation of Scalar Transport in Complex Turbulent Flows," Journal of KSME, Vol.26, No.12, pp.3803-3810, 2012. https://doi.org/10.1007/s12206-012-1004-4
- A. A. Pekalski, E. Terli, J. F. Zevenbergen, S. M. Lemkowitz and H. J. Pasman, "Influence of the Ignition Delay Time on the Explosion Parameters of Hydrocarbon-air-oxygen Mixtures at Elevated Pressure and Temperature," Proceedings of the Cpmbustion Institute, Vol.30, No.2, pp.1933-1939, 2005. https://doi.org/10.1016/j.proci.2004.08.262