DOI QR코드

DOI QR Code

Operating Characteristics of Dual-fuel Combustion with DME and Gasoline in a Compression Ignition Engine

압축착화 엔진에서 DME-가솔린 혼소 운전 특성에 관한 연구

  • Kim, Kihyun (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Bae, Choongsik (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 김기현 (한국과학기술원 기계공학과) ;
  • 배충식 (한국과학기술원 기계공학과)
  • Received : 2013.05.27
  • Accepted : 2013.08.15
  • Published : 2014.01.01

Abstract

Dual fuel combustion strategy with di-methl ether (DME) and gasoline was tested in a compression ignition engine. Characteristics of combustion and emissions were analyzed with the variation of engine operating parameters such as fuel proportion, DME injection timing, intake oxygen concentration, DME injection pressure and so forth. Gasoline was injected into the intake manifold to form the homogeneous mixture with intake charge and DME was injected directly into the cylinder at the late compression stroke to ignite the homogeneous gasoline-air mixture. Dual fuel combustion strategy was advantageous in achievement of higher thermal efficiency and low NOx emission compared with DME single fuel combustion. Higher thermal efficiency was attributed to the lower heat tranfer loss from the decreased combustion temperature since the amount of lean premixed combustion was increased with the larger amount of gasoline proportion. Lower NOx emissions were also possible by lowering the combustion temperature.

Keywords

References

  1. J. E. Dec, "Advanced Compression-ignition Engines Understanding the In-cylinder Processes," Proc. of the Combustion Institute, Vol.32, pp.2727-2742, 2009. https://doi.org/10.1016/j.proci.2008.08.008
  2. EPA Emission Standards, http://www.dieselnet.com/standards, 2013.
  3. F. Zhao, T. Asmus, D. Assanis, J. Dec, J. Eng and P. Najt, "Homogeneous Charge Compression Ignition (HCCI) Engines," SAE International, Warrendale, PA, 2003.
  4. I. Yoshinori, K. Kenji, S. Takeshi and T. Yoshinaka, "Trial of New Concept Diesel Combustion System - Premixed Compression Ignition Combustion," SAE 1999-01-0185, 1999.
  5. T. Kamimoto and M. Bae, "High Combustion Temperature for the Reduction of Particulate in Diesel Engines," SAE 880423, 1988.
  6. G. T. Kalghatgi, "Auto-ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines," SAE 2005-01-0239, 2005.
  7. H. Suzuki, "Combustion Control Method of Homogeneous Charge Diesel Engines," SAE 980509, 1998.
  8. K. Yeom, J. Jang and C. Bae, "Homogeneous Charge Compression Ignition of LPG and Gasoline Using Variable Valve Timing in an Engine," Fuel, Vol.86, No.4, pp.494-503, 2007. https://doi.org/10.1016/j.fuel.2006.07.027
  9. K. Yeom and C. Bae, "Gasoline - Dimethyl Ether Homogeneous Charge Compression Ignition Engine," Energy and Fuels, Vol.21, No.4, pp.1942-1949, 2007. https://doi.org/10.1021/ef070076h
  10. S. Lee and O. Lim, "Research of Natural Gas/Diesel Dual Fuel Vehicle," Transactions of KSAE, Vol.20, No.5, pp.13-18, 2012. https://doi.org/10.7467/KSAE.2012.20.5.013
  11. C. Arcoumanis, C. Bae, R. Crookes and E. Kinoshita, "The Potential of Di-methyl Ether (DME) as an Alternative Fuel for Compressionignition Engines: A Review," Fuel, Vol.87, No.7, pp.1014-1030, 2007.