에너지공학 (Journal of Energy Engineering)

  • 제23권4호
  • /
  • Pages.73-88
  • /
  • 2014
  • /
  • 1598-7981(pISSN)
  • /
  • 2713-7074(eISSN)
한국에너지학회 (The Korean Society for Energy)
권호 표지
DOI QR코드

DOI QR Code

An Overall Investigation of Break Simulators for LOCA Scenarios in Integral Effect Tests

  • 투고 : 2014.08.29
  • 심사 : 2014.12.04
  • 발행 : 2014.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Various studies on the critical flow models for sub-cooled and/or saturated water were reviewed, especially on Fauske, Moody, and Henry for basic theoretical models; Zaloudek for insight into physical phenomena for a critical flow in an orifice type flow path; Sozzi & Sutherland for a critical flow test of saturated and sub-cooled water at high pressure for orifice and nozzles; and a Marviken test on a full-scale critical flow test. In addition, critical flow tests of sub-cooled water for the break simulators in integral effect test (IET) facilities were also investigated, and a hybrid concept using Moody's and Fauske's models was considered by the authors. In the comparison of the models for the selected test data, discussions of the effect of the diameters, predictions of the critical flow models, and design aspects of break simulator for SBLOCA scenarios in the IET facilities were presented. In the effect of diameter on the critical flow rate with respect to all dimensional scales, it was concluded that the effect of diameter was found irrespective of diameter sizes. In addition, the diameter effect on slip ratio affecting the critical flow rate was suggested. From a comparison of the critical flow models and selected test data, the Henry-Fauske model of the MARS-KS code was found to be the best model predicting the critical flow rate for the selected test data under study.

키워드

참고문헌

  1. H.K. Fauske: "Contribution to the Theory of Two-phase, One Component Critical Flow," ANL-6633 (1962)
  2. F.R. Zaloudek: "Critical Flow of Hot Water through Short Tubes," General Electric, HW-77594 (1963)
  3. F.J. Moody: "Maximum Flow Rate of a Single Component, Two-Phase Mixture." ASME Journal of Heat Transfer, pp. 134-142 (1965)
  4. R.E. Henry: "A Study of One- and Two-Component, Two-Phase Critical Flows at Low Qualities," ANL-7430 (1968)
  5. G.L. Sozzi and W.A. Sutherland: "Critical Flow of Saturated and Subcooled Water at High Pressure," NEDO-13418 (1975)
  6. U.S. NRC: "The Marviken Full-Scale Critical-Flow Tests,"NUREG/CR-2671, MXC-301 (1982)
  7. M-H. Chun, C-K. Park, and J-W. Park, "An Experimental Investigation of Critical Flow Rates of Subcooled Water Through Short Pipes with Small Diameters," Int. Comm. in Heat and Mass Transfer, Vol. 23, No. 8, pp. 1053-1064 (1996) https://doi.org/10.1016/S0735-1933(96)00087-5
  8. C-K. Park, "An Experimental Investigation of Critical Flow Rates of Subcooled Water through Short Pipes with Small Diameters," Ph. D. Thesis, KAIST, Korea (1997)
  9. C-K. Park, J-W. Park, M-K. Chung, and M-H. Chun: "An Empirical Correlation for Critical Flow Rates of Subcooled Water through Short Pipes with Small Diameters," Nuc. Eng. and Tech., Vol. 29, No. 1, pp. 35-44 (1997)
  10. C-K. Park, S. Cho, T-S. Kwon, S-K. Yang, and M-K. Chung: "An Experimental Investigation of Maximum Flow Rates of Subcooled Water through Square Edge Orifices with Small Diameters," NTHAS2: Second Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety, Fukuoka, Japan, Oct. 15-18 (2000)
  11. H-S. Park, N-H. Choi, S-K. Chang, C-H. Chung, S-J. Yi, C-K. Park, and M-K. Chung: "Experimental Study on a Two-phase Critical Flow with a Non-Condensable Gas at High Pressure Conditions," Int. J. Multiphase Flow, 33, pp. 1222-1236 (2007) https://doi.org/10.1016/j.ijmultiphaseflow.2007.05.008
  12. W-P. Baek, and Y-S. Kim, "Accident Simulation ATLAS for APWRs," Nuclear Engineering International, 53, pp. 21-25 (2008)
  13. H-S. Park, S-J. Yi, and C-H. Song," SMR Accident Simulation in Experimental Test Loop," Nuclear Engineering International, November, pp. 12-15 (2013)
  14. R.T. Lahey, Jr. and F.J. Moody, The Thermal-Hydraulics of a Boiling Water Reactor, 3rd Printing, American Nuclear Society (1984)
  15. F.J. Moody, "Maximum Two-Phase Vessel Blowdown from Pipes," ASME Journal of Heat Transfer, pp. 285-295 (1966)
  16. S-T. Lee, "Horizontal Disperse Flows: Disperse and Continuous Phase Velocity,"Interim Presentation, Korea Atomic Energy Research Institute (2013)
  17. B-D. Chung et al., "MARS Code Manual, Volume II: Input Requirements," KAERI/TR-2811/2004, Korea Atomic Energy Research Institute (2007)
  18. U.S. NRC, "TRACE V5.0 User's Manual, Volume 1: Input Specification," Office of Nuclear Regulatory Research, U.S. NRC (2008)
  19. F.J. Moody, "Maximum Discharge Rate of Liquid-Vapor Mixtures from Vessels, Non-Equilibrium Two-Phase Flows," ASME Symp.,American Society of Mechanical Engineers, pp. 27-36 (1975)
  20. I.E. Idelchik, Handbook of Hydraulic Resistance, 3rd Edition, Begell House, Inc. (1996)

피인용 문헌

  1. Code validation on a passive safety system test with the SMART-ITL facility 2016, https://doi.org/10.1080/00223131.2016.1262797