참고문헌
- Park SM, Yasuda E, Park YD. The influence of graphitic structure on oxidation reaction of carbon materials. J Korean Ceram Soc, 33, 816 (1996).
- Liu Z, Guo Q, Shi J, Zhai G, Liu L. Graphite blocks with high thermal conductivity derived from natural graphite flake. Carbon, 46, 414 (2008). http://dx.doi.org/10.1016/j.carbon.2007.11.050.
- Youm HN, Kim KJ, Lee JM, Chung YJ. Effects of impregnation on the manufacture of high density carbon materials. J Korean Ceram Soc, 30, 852 (1993).
- Choi WK, Kim BJ, Chi SH, Park SJ. Nuclear graphites (I): oxidation behaviors. Carbon Lett, 10, 239 (2009). https://doi.org/10.5714/CL.2009.10.3.239
- Jung JW, Kim KT. Effect of rubber mold on densification behavior of metal powder during cold isostatic pressing. Trans Korean Soc Mech Eng A, 22, 330 (1998).
- Chung SH, Kim KW, Kim MS, Lim YS. Analysis on raw materials for graphite electrode. J Res Inst Ind Technol, 18, 365 (1999).
- Wissler M. Graphite and carbon powders for electrochemical applications. J Power Sources, 156, 142 (2006). http://dx.doi.org/10.1016/j.jpowsour.2006.02.064.
- Park YD. Production technology of artificial graphite electrodes for arc furnace. Polym Sci Technol, 8, 155 (1997).
- Janerka K, Bartocha D. The sort of carburization and the quality of obtained cast iron. Arch Foundry Eng, 8, 55 (2008).
- Roessler A, Crettenand D. Direct electrochemical reduction of vat dyes in a fixed bed of graphite granules. Dyes Pigments, 63, 29 (2004). http://dx.doi.org/10.1016/j.dyepig.2004.01.005.
- Fan Cl, Chen H. Preparation, structure, and electrochemical performance of anodes from artificial graphite scrap for lithium ion batteries. J Mater Sci, 46, 2140 (2011). http://dx.doi.org/10.1007/s10853-010-5050-y.
- Aas KL. Performance of two graphite electrode qualities in EDM of seal slots in a jet engine turbine vane. J Mater Process Technol, 149, 152 (2004). http://dx.doi.org/10.1016/j.jmatprotec.2004.02.005.
- Han YS, Kim HJ, Shin YS, Park JK, Ko JC. Silver coating on the porous pellets from porphyry rock and application to an antibacterial media. J Korean Ceram Soc, 46, 16 (2009). https://doi.org/10.4191/KCERS.2009.46.1.016
- Ishizaki KZ, Komarneni S, Nanko M. Porous Materials: Process Technology and Applications, Kluwer Academic Publishers, Dordrecht (1998).
- Cao A, Xu C, Liang J, Wu D, Wei B. X-ray diffraction characterization on the alignment degree of carbon nanotubes. Chem Phys Lett, 344, 13 (2001). http://dx.doi.org/10.1016/S0009-2614(01)00671-6.
- Roh JS. A structural study of the oxidized high modulus pitch based carbon fibers by oxidation in carbon dioxide. Carbon Lett, 5, 27 (2004).
- Seehra MS, Pavlovic AS, Babu VS, Zondlo JW, Stansberry PG, Stiller AH. Measurements and control of anisotropy in ten coal-based graphites. Carbon, 32, 431 (1994). http://dx.doi.org/10.1016/0008-6223(94)90163-5.
- Weller TE, Ellerby M, Saxena SS, Smith RP, Skipper NT. Superconductivity in the intercalated graphite compounds C6Yb and C6Ca. Nat Phys, 1, 39 (2005). http://dx.doi.org/10.1038/nphys0010.
- Slack GA. Anisotropic thermal conductivity of pyrolytic graphite. Phys Rev, 127, 694 (1962). http://dx.doi.org/10.1103/PhysRev.127.694.
- Oh JK, Lee SW, Park KW. Preparation of isotropic carbon with high density. J Korean Ceram Soc, 28, 908 (1991).
피인용 문헌
- Changes in the porosity of bulk graphite according to the viscosity of resin for impregnation vol.16, pp.2, 2015, https://doi.org/10.5714/CL.2015.16.2.132
- Bulk graphite: materials and manufacturing process vol.16, pp.3, 2015, https://doi.org/10.5714/CL.2015.16.3.135