Journal of International Society for Simulation Surgery

International Society for Simulation Surgery (국제컴퓨터가상수술학회)
권호 표지
DOI QR코드

DOI QR Code

3D Overhead Modeling Using Depth Sensor

  • Song, Eungyeol (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Lee, Sangyoun (Department of Electrical and Electronic Engineering, Yonsei University)
  • Received : 2014.11.24
  • Accepted : 2014.12.07
  • Published : 2014.12.20
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose This paper was purposed to suggest the method to produce the supportive helmet (head correction) for the infants who are suffering from plagiocephaly and to evaluate the level of transformation through 3D model. Method Either of CT or X-ray restored images has been used in making the supportive helmet (Head correction) in general, but these methods of measuring have problems in cost and safety. 3D surface measurement technology was suggested to solve such matters. Results It was to design the transformed model of the head within 0.7cm in average by scanning the surface of head and performing 3D restoration with marching cube and the changing rate of the head was compared in numerical data with 3D model. Conclusion The suggested methods displayed the better performance than the conventional method in respect of the speed and cost.

Keywords

References

  1. Katzel EB, Koltz PF, Sbitany H, Emerson C, Girotto JA. Real versus perceived improvements of helmet molding therapy for the treatment of plagiocephaly. Plast Reconstr Surg 2010;126:19e-21e https://doi.org/10.1097/PRS.0b013e3181dab573
  2. Katzel EB, Koltz PF, Sbitany H, Girotto JA. Treatment of plagiocephaly with helmet molding therapy: do actual results mimic perception? Cleft Palate Craniofac J 2011;48:205-209 https://doi.org/10.1597/09-209
  3. Lee RP, Teichgraeber JF, Baumgartner JE, Waller AL, English JD, Lasky RE, Miller CC, Gateno J, Xia JJ. Long-term treatment effectiveness of molding helmet therapy in the correction of posterior deformational plagiocephaly: a five-year follow-up. Cleft Palate Craniofac J 2008;45:240-245 https://doi.org/10.1597/06-210.1
  4. Lipira AB, Gordon S, Darvann TA, Hermann NV, Van Pelt AE, Naidoo SD, Govier D, Kane AA. Helmet versus active repositioning for plagiocephaly: a threedimensional analysis. Pediatrics 2010;126:e936-e945 https://doi.org/10.1542/peds.2009-1249
  5. Schaaf H, Malik CY, Streckbein P, Pons-Kuehnemann J, Howaldt HP, Wilbrand JF. Three-dimensional photographic analysis of outcome after helmet treatment of a nonsynostotic cranial deformity. J Craniofac Surg 2010;21:1677-1682 https://doi.org/10.1097/SCS.0b013e3181f3c630
  6. Kim SY. "Outcome Analysis of Helmet Therapy and Counter Positioning for Deformational Plagiocephaly", 2013, Thesis (M.A.)--, Ajou University
  7. Jiwoo Kang, doyoung kim, Sanghoon Lee, "Segmentation and 3D Visualzation of Medical Image : An Overview", 2014. Journal of international society for Simulation surgery Vol.1 NO.1 27-31 https://doi.org/10.18204/JISSiS.2014.1.1.027