DOI QR코드

DOI QR Code

Compact Heat Exchanger Design for Biogas Application

바이오가스용 소형 열교환기 연구

  • Received : 2014.01.21
  • Accepted : 2014.04.30
  • Published : 2014.04.30

Abstract

Our lab designs a heat exchangers for air and carbondioxide gas. Coolant is water, thus it is very difficult to determine heat transfer parameters in this gas-liquid system. Repeated experiments gives overdesign value 35%, overall heat transfer coefficient $33.8(kcal/m2-hr-^{\circ}C)$ for carbondioxide. Another series of experiments determine overdesign 18.7%, overall heat transfer coefficient $21.4(kcal/m2-hr-^{\circ}C)$ for Air. These parameters are in same range of literature. Overdesign is increasing as tube length increases, also increases as wall thickness of heat exchanger increases. To get proper fluid linear velocity in heat exchanger, we change the diameter of tube and finally we can have optimum fluid linear velocity in the heat exchanger.

Keywords

References

  1. J. D. kim, "The Present and Future of monitoring business of residential fuel cell", The Korean Society For New And Ranewable Energy. pp. 21-24.
  2. S. S. Oh, K. J. Kim, "Removal of Odorants by Selective Adsorption from Natural Gas for Protection of Steam Reforming Catalyst in Fuel Cell from Sulfur Poisoning", J, Korean Ind. Eng. Chem., Vol 18, No. 4, August 2007, 337-343.
  3. J. D. kim, D, Y, Park, "The Present and Future of residential fuel cell". Development of Building fuel cell.
  4. J. W. Yu, K. H. Kim, "Outlook and market trends in the fuel cell", korearatings. 2011.5.24.
  5. Y. H. Shin, H. D. Jeong, J. H. Lee, H. S. Chung, H. M. Jeong, "A Numerical Study of Heat Transfer and Flow Characteristics in Shell and Tube Heat Exchanger", The Society of Air-Conditioning and Refrigerating Engineers of korea. 2011, pp. 1070-1073.
  6. S. C. Lee, I. S. Song. P. D. Park, "Design Technolohy of Shell and Tube Heat Exchangers"
  7. K. C. Yeo. "The design theory of Heat Exchanger".
  8. S. H. Lee, M. S. Lee, N. K. Hur. "Namerical Analysis on the Heat Transfer and Flow in the Shell and Tube Heat Exchanger", Korean Society for Computational Fluids Engineering, pp. 149-152.
  9. Daniel R. Lewin, Technion, "Heat Exchanger Design", Lecture seven, 054410 Plant Design.
  10. Rajiv Mukherjee, Engineers india Ltd. "shell-and-tube heat exchangers", "Effectively Design Shell-and-Tube Heat Exchangers", 1998, February.
  11. S. H. Hong, S. H. Yoon, J. H. Kim, "A study on the Computer Aided Design of Shell & Tube Type Heat Exchanger".
  12. Dr. K. J. Bell and Dr. A.C. Mueller, "Wolverine heat transfer engineering data book", chap2. pp. 77-84.
  13. C. H. Lee, DAELIM Ltd, "Cost saving proposal through no Expansion Joint in NTIW Baffle type Fixed Type Heat Exchanger", 2003, 10
  14. T. G. P, S. C. Lee, S. C. Nam, P. D. P. "Development of a Single Phase Shell-and-Tube Type Heat Exchanger Themal Design Code Based on Stream Analysis" Energy Engineering, Vol. 10, No. 4, 2001. 11. pp. 299-309.
  15. Overall Heat transfer coefficient from spirax sarco co. A. 3. 4.
  16. K. S .Oh, K. S. Lee, K. D. Kim, "Biogas as a Transport Fuel : Cleaning & Upgrading Technology" pp. 49-61.