Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지
DOI QR코드

DOI QR Code

The Measurement of Combustible Properties of Cyclohexanol

사이클로헥산올의 연소특성치의 측정

  • Ha, Dong-Myeong (Dept. of Occupational Health and Safety Engineering, Semyung University)
  • 하동명 (세명대학교 보건안전공학과)
  • Received : 2014.02.17
  • Accepted : 2014.04.17
  • Published : 2014.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

For the safe handling of cyclohexanol, this study was investigated the explosion limits of cyclohexanol in the reference data. The flash points and auto-ignition temperatures (AITs) by ignition delay time were experimented. The lower flash points of cyclohexanol by using closed-cup tester were experimented in$60^{\circ}C{\sim}64^{\circ}C$. The lower flash points of cyclohexanol by using open cup tester were experimented in $66^{\circ}C{\sim}68^{\circ}C$. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 tester for cyclohexanol. The AIT of cyclohexanol was experimented as $297^{\circ}C$. The lower explosion limit (LEL) and the upper explosion limit UEL) by the measured the lower flash point and the upper flash point of cyclohexanol were calculated as 0.95 Vol% and 10.7 Vol%, respectively.

사이클로헥산올의 안전한 취급을 위해, 폭발한계는 문헌을 통해 고찰하였고, 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 그 결과, 밀폐식 장치에 의한 사이클로헥산올의 하부인화점은$60^{\circ}C{\sim}64^{\circ}C$로 측정되었으며, 개방식에서는 $66^{\circ}C{\sim}68^{\circ}C$로 측정되었다. ASTM E659 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 사이클로헥산올의 최소자연발화온도는 $297^{\circ}C$로 측정되었다. 측정된 하부인화점과 상부인화점에 의한 폭발하한계는 0.95 Vol%, 상한계는 10.7 Vol%로 계산되었다.

Keywords

References

  1. D. A. Crowl and J. F. Louvar, "Chemical Process Safety Fundamentals with Application", 2nd ed., Pearson Education Inc. (2002).
  2. F. P. Lees, "Loss Prevention in the Process Industries", Vol. 2, 2nd ed., Butterworth-Heinemann (1996).
  3. R. H. Perry and D. W. Green, "Perry's Chemical Engineers' Handbook", 7th ed., McGraw-Hill (1997).
  4. V. Babrauskas, "Ignition Handbook", Fire Science Publishers, SFPE (2003).
  5. SFPE, "SFPE Handbook of Fire Protection Engineering", 2nd ed., SFPE (1995).
  6. R. E. Lenga and K. L. Votoupal, "The Sigma Aldrich Library of Regulatory and Safety Data, Volume -", Sigma Chemical Company and Aldrich Chemical Company Inc. (1993).
  7. D. R. Lide, "Handbook Chemistry and Physics", 76th ed., CRC Press (1996).
  8. J. A. Dean, "Lange's Handbook of Chemistry", 14th ed. McGraw-Hill (1992).
  9. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, NFPA (1991).
  10. E. W. Flick, "Industrial Solvent Handbook", 3rd. ed., Noyes, Data Corp., Park Ridge, N.J. (1985).
  11. Fluka Chemie AG., Catalog 1986-87, CH-9470, Bucks/ Switzerland.
  12. D. M. Ha, "The Measurement of Fire and Explosion Properties of n-Pentadecane", J. of the Korean Society of Safety, Vol. 28, No. 4, pp. 53-57 (2013). https://doi.org/10.14346/JKOSOS.2013.28.4.053
  13. D. M. Ha, "Risk Assessment by means of Measurement of Combustible Characteristics for n-Noanol", J. of the Korean Institute of Fire Sci. & Eng., Vol. 26, No. 2, pp. 84-89 (2012). https://doi.org/10.7731/KIFSE.2012.26.2.084
  14. J. Gmehing, U. Onken and W. Arlt, "Vapor-Liquid Equilibrium Data Collection", DECHEMA (1980).
  15. N. N. Semenov, "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J. (1959).