DOI QR코드

DOI QR Code

Failure analysis of steel column-RC base connections under lateral cyclic loading

  • Demir, Serhat (Department of Civil Engineering, Karadeniz Technical University) ;
  • Husem, Metin (Department of Civil Engineering, Karadeniz Technical University) ;
  • Pul, Selim (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2013.12.06
  • 심사 : 2014.03.05
  • 발행 : 2014.05.25

초록

One of the most important structural components of steel structures is the column-base connections which are obliged to transfer horizontal and vertical loads safely to the reinforced concrete (RC) or concrete base. The column-base connections of steel or composite steel structures can be organized both moment resistant and non-moment resistant leading to different connection styles. Some of these connection styles are ordinary bolded systems, socket systems and embedded systems. The structures are frequently exposed to cycling lateral loading effects causing fatal damages on connections like columns-to-beams or columns-to-base. In this paper, connection of steel column with RC base was investigated analytically and experimentally. In the experiments, bolded connections, socket and embedded connection systems are taken into consideration by applying cyclic lateral loads. Performance curves for each connection were obtained according to experimental and analytical studies conducted and inelastic behavior of connections was evaluated accordingly. The cyclic lateral performance of the connection style of embedding the steel column into the reinforced concrete base and strengthening of steel column in upper level of base connection was found to be higher and effective than other connection systems. Also, all relevant test results were discussed.

키워드

참고문헌

  1. Akiyama, H., Kurosawa, M., Wakuni, N. and Nishinura, I. (1984), "Strength and deformation of exposed type of steel column bases", J. Struct. Constr. Eng., Tran. AIJ, 342, 46-54.
  2. Alfano, G. and Crisfield, M.A. (2001), "Finite element interface models for the delamination anaylsis of laminated composites", Mech. Comput. Issue., Int. J. Numer. Meth. Eng., 50, 1701-36. https://doi.org/10.1002/nme.93
  3. ANSYS (2008), Finite element analysis system, SAS IP, Inc., USA.
  4. Broderick, B.M. and Elnashai, A.S. (1996), "Seismic response of composite frames-I. Response criteria and input motion", Eng. Struct., 18(9), 696-706. https://doi.org/10.1016/0141-0296(95)00211-1
  5. Cook, R.A. and Klinger, R.E. (1992), "Ductile multiple-anchor steel-to-concrete connections", J. Struct. Div., ASCE, 118, 1645-65. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1645)
  6. Dewolfe, J.T. (1978), "Axially loaded column base plates", J. Struct. Div., ASCE, 104, 781-94.
  7. Ermopoulos, J.C. and Stamatopoulos, G.N. (1996), "Analytical modelling of column-base plates under cyclic loading", J. Constr. Steel. Res., 40(3), 225-38. https://doi.org/10.1016/S0143-974X(96)00043-0
  8. FEMA (2000), Recommended seismic design criteria for new steel moment frame buildings, Report no. FEMA-350, Federal Emergency Management Agency: California Universities for Research in Earthquake Engineering.
  9. Fling, R.S. (1970), "Design of steel bearing plates", Eng. J., AISC, 7(2), 37-40.
  10. Kallolil, J.J., Chakrabarti, S.K. and Mishra, R.C. (1998), "Experimental investigation of embedded steel plates in reinforced concrete structures", Eng. Struct., 20(1-2), 105-12. https://doi.org/10.1016/S0141-0296(97)00045-X
  11. Kontoleon, M.J., Mistakidis, E.S., Baniotopoulos, C.C. and Panagiotopoulos, P.D. (1999), "Parametric analysis of the structural response of steel base plate connections", Comput. Struct., 71, 87-103. https://doi.org/10.1016/S0045-7949(98)00232-6
  12. Lee, T.K.L. and Pan, A.D.E. (2011), "Analysis of composite beam-columns under lateral cyclic loading", J. Struct. Eng., ASCE, 127(2), 186-93.
  13. Morino, S., Kawaguchi, J., Tsuji, A. and Kadoya, H. (2003), "Strength and stiffness of CFT semi-embedded type column base", Proceedings of ASSCCA Conference, Sydney, Australia.
  14. Murray, T.M. (1983), "Design of lightly loaded steel column base plates", Eng. J., AISC, 20, 143-152.
  15. Nakashima, S. and Igarashi, S. (1986), "Behavior of steel square tubular column bases embedded in concrete footings under bending moment and shearing force, Part 1: test program and load-displacement relations", J. Constr. Steel. Res., Tran. AIJ, 366, 106-118.
  16. Nakashima, S. (1992), "Experimental behavior of encased steel square tubular column base connections", Proceedings of the first word conference on constructional steel design, word developments, Eds. Dowling, P., Harding, J.E., Bjorhovde, R. and Martinez-Romeo, E., Elsevier Applied Science, Acapulco.
  17. Northridge Reconnaissance Team (1996), "Earthquake spectra, Northridge earthquake of January 17, 1994", Reconnaissance Report, Supplement C-2, 11, 25-47.
  18. Pertold, J., Xiao, R.Y. and Wald, F. (2000), "Embedded steel column bases - I. experiments and numerical simulation", J. Constr. Steel Res., 56, 253-70. https://doi.org/10.1016/S0143-974X(99)00105-4
  19. Ricles, J.M. and Paboojian, S.D. (1994), "Seismic performance of steel-encased composite columns", J. Struct. Eng., ASCE, 120(8), 2474-94. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2474)
  20. Technical Council on Lifeline Earthquake Engineering (1995), "Northridge earthquake-lifeline performance and post-earthquake response, monograph No. 8", ASCE, New York.
  21. Sarno, L. Di., Pecce, M.R. and Fabbrocino, G. (2007), "Inelastic response of composite steel and concrete base column connections", J. Constr. Steel Res., 63, 819-32. https://doi.org/10.1016/j.jcsr.2006.08.007
  22. Stamatopoulos, G.N. and Ermopoulos, J.C. (2011), "Experimental and analytical investigation of steel column bases", J. Constr. Steel. Res., 67, 1341-57. https://doi.org/10.1016/j.jcsr.2011.03.007

피인용 문헌

  1. Investigation of bond-slip modeling methods used in FE analysis of RC members vol.56, pp.2, 2015, https://doi.org/10.12989/sem.2015.56.2.275
  2. Experimental study of steel pipe and reinforced concrete wall connections under lateral loading vol.145, 2017, https://doi.org/10.1016/j.engstruct.2017.05.019
  3. Shear behavior of exposed column base connections vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.357
  4. Analysis and design of demountable embedded steel column base connections vol.23, pp.3, 2014, https://doi.org/10.12989/scs.2017.23.3.303