참고문헌
- Agnew S R and Nie J F (2010) Preface to the viewpoint set on: the current state of magnesium alloy science and technology. Scripta Mater. 63, 671-673. https://doi.org/10.1016/j.scriptamat.2010.06.029
- Chino Y, Sassa K, Kamiya A, and Mabuchi M (2006) Enhanced formability at elevated temperature of a cross-rolled magnesium alloy sheet. Mater. Sci. Eng. A 441, 349-356. https://doi.org/10.1016/j.msea.2006.08.038
- Chino Y, Sassa K, and Mabuchi M (2008) Enhancement of tensile ductility of magnesium alloy produced by torsion extrusion. Scripta Mater. 59, 399-402. https://doi.org/10.1016/j.scriptamat.2008.04.013
- Huang X, Suzuki K, Watazu A, Shigematsu I, and Saito N (2008) Microstructure and texture of Mg-Al-Zn alloy processed by differential speed rolling. J. Alloys Compd. 457, 408-412. https://doi.org/10.1016/j.jallcom.2007.02.144
- Lee J Y, Yun Y S, Suh B C, Kim N J, Kim W T, and Kim D H (2014) Comparison of static recrystallization behavior in hot rolled Mg-3Al-1Zn and Mg-3Zn-0.5Ca sheets. J. Alloys Compd. 589, 240-246. https://doi.org/10.1016/j.jallcom.2013.11.210
- Lim H K, Lee J Y, Kim D H, Kim W T, Lee J S, and Kim D H (2009) Enhancement of mechanical properties and formability of Mg-MMSn-Al-Zn alloy sheets fabricated by cross-rolling method. Mater. Sci. Eng. A 506, 63-70. https://doi.org/10.1016/j.msea.2008.12.037
- Mackenzie L W F and Pekguleryuz M O (2008) The recrystallization and texture of magnesium-zinc-cerium alloys. Scripta Mater. 59, 665-668. https://doi.org/10.1016/j.scriptamat.2008.05.021
- Sun H F, Liang S J, and Wang E D (2009) Mechanical properties and texture evolution during hot rolling of AZ31 magnesium alloy. Trans. Nonferrous Met. Soc. China 19, 349-354. https://doi.org/10.1016/S1003-6326(10)60067-2
- Wang M, Xin R, Wang B, and Liu Q (2011) Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling. Mater. Sci. Eng. A 528, 2941-2951. https://doi.org/10.1016/j.msea.2010.11.069
- Xia W, Chen Z, Chen D, and Zhu S (2009) Microstructure and mechanical properties of AZ31magnesium alloy sheets produced by differential speed rolling. J. Mater. Process. Technol. 209, 26-31. https://doi.org/10.1016/j.jmatprotec.2008.01.045
- Zhang Z, Wang M, Zhu S, and Jiang N (2012) Preferential dynamic recrystallization at original grain boundaries in the hot-rolling process of AZ31 alloy. Mater. Sci. Eng. A 544, 159-165.