참고문헌
- M.-A. Moon and K.-Y. Kim, 2011, "Shape Optimization of a Rotating Two-Pass Duct with a Guide Vane in the Turning Region," Journal of Fluid Machinery, Vol. 14, No. 1, pp. 66-76. https://doi.org/10.5293/KFMA.2011.14.1.066
- S. V. Ekkad and J.-C. Han, 1997, "Detailed Heat Transfer Distributions in Two-Pass Square Channels with Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 40, No. 11, pp. 2525-2537. https://doi.org/10.1016/S0017-9310(96)00318-3
-
S. V. Prabhu and R. P. Vedula, 2000, "Pressure Drop Characteristics in a Rotating Smooth Square Channel with a Sharp
$180^{\circ}$ bend," Experimental Thermal and Fluid Science, Vol. 21, pp. 198-205. https://doi.org/10.1016/S0894-1777(00)00003-0 - K.-M. Kim and H.-H. Cho, 2007, "Pressure Drop Characteristics in a Coolant Passage with Turning Region and Rotation," Journal of Fluid Machinery, Vol. 10, No. 2, pp. 32-40.
- G. Su, H.-C. Chen, J.-C. Han and J.-D. Heidmann, 2004, "Computation of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels(AR=1:1, 1:2 and 1:4) with Smooth Walls by a Reynolds Stress Turbulence Model," Int. J. of Heat Mass Transfer, Vol. 47, pp. 5665-5683. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.019
- J. S. Park, J. C. Han, Y. Huang and S. Ou, 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels with Parallel Angled Ribs," Int. J. Heat Mass Transfer, Vol. 35, No. 11, pp. 2891-2903. https://doi.org/10.1016/0017-9310(92)90309-G
- J. C. Han and Y. M. Zhang, 1992, "High Performance Heat Transfer Ducts with Parallel Broken and V-Shaped Broken Ribs," Int. J. Heat Mass Transfer, Vol. 35, No. 2, pp. 513-523. https://doi.org/10.1016/0017-9310(92)90286-2
- R. T. Kukreja, S. C. Lau and R. D. Mcmillin, 1993, "Local Heat/Mass Transfer Distribution in a Square Channel with Full and V-Shaped Ribs," Int. J. Heat Mass Transfer, Vol. 36, No. 8, pp. 2013-2020. https://doi.org/10.1016/S0017-9310(05)80132-2
- K.-M. Kim, S.-I. Kim, D.-H. Rhee and H.-H. Cho, 2005, "Experimental Study of Heat/Mass Transfer in Rotating Cooling Passages with Discrete Ribs," Trans. Korean Soc. Mech. B, Vol. 29, No. 5, pp. 590-598. https://doi.org/10.3795/KSME-B.2005.29.5.590
- S. Kakac and H. Liu, 2002, Heat exchangers: selection, rating, and thermal design, New York, USA.
피인용 문헌
- 2014년 압축기 분야 연구동향 vol.18, pp.2, 2015, https://doi.org/10.5293/kfma.2015.18.2.076