The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Configurations of Coolant Flow Passage on the Thermal-Flow Characteristics of Screw Compressor

스크류 압축기 냉각유로 형상 변화가 열유동 특성에 미치는 영향

  • Cho, Sung-Wook (Graduate School of Mechanical Engineering, Sungkyunkwan University) ;
  • Seo, Hyeon-Seok (Graduate School of Mechanical Engineering, Sungkyunkwan University) ;
  • Shon, Kil-Won (Yujin Machinery Ltd.) ;
  • Kim, Youn-Jea (Graduate School of Mechanical Engineering, Sungkyunkwan University)
  • 조성욱 (성균관대학교 대학원 기계공학과) ;
  • 서현석 (성균관대학교 대학원 기계공학과) ;
  • 손길원 (유진기공산업(주)) ;
  • 김윤제 (성균관대학교 대학원 기계공학과)
  • Received : 2013.12.05
  • Accepted : 2013.12.26
  • Published : 2014.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The thermal-flow characteristics of screw compressor were numerically investigated with various geometrical configurations of its coolant flow passage applied to the separate block for enhancing the heat transfer performance of it. The length ratio($L_s/D$=4.8, 5.6, 6.4) and thickness ratio(t/D=0.2, 0.4, 0.6) of the separate block in the flow passage of the water jacket were adopted to design parameters. Results showed that the pressure drop and heat transfer were increased as the length of separate block increases due to the flow separation and centrifugal force. The results were graphically depicted with various flow and geometrical conditions.

Keywords

References

  1. M.-A. Moon and K.-Y. Kim, 2011, "Shape Optimization of a Rotating Two-Pass Duct with a Guide Vane in the Turning Region," Journal of Fluid Machinery, Vol. 14, No. 1, pp. 66-76. https://doi.org/10.5293/KFMA.2011.14.1.066
  2. S. V. Ekkad and J.-C. Han, 1997, "Detailed Heat Transfer Distributions in Two-Pass Square Channels with Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 40, No. 11, pp. 2525-2537. https://doi.org/10.1016/S0017-9310(96)00318-3
  3. S. V. Prabhu and R. P. Vedula, 2000, "Pressure Drop Characteristics in a Rotating Smooth Square Channel with a Sharp $180^{\circ}$ bend," Experimental Thermal and Fluid Science, Vol. 21, pp. 198-205. https://doi.org/10.1016/S0894-1777(00)00003-0
  4. K.-M. Kim and H.-H. Cho, 2007, "Pressure Drop Characteristics in a Coolant Passage with Turning Region and Rotation," Journal of Fluid Machinery, Vol. 10, No. 2, pp. 32-40.
  5. G. Su, H.-C. Chen, J.-C. Han and J.-D. Heidmann, 2004, "Computation of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels(AR=1:1, 1:2 and 1:4) with Smooth Walls by a Reynolds Stress Turbulence Model," Int. J. of Heat Mass Transfer, Vol. 47, pp. 5665-5683. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.019
  6. J. S. Park, J. C. Han, Y. Huang and S. Ou, 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels with Parallel Angled Ribs," Int. J. Heat Mass Transfer, Vol. 35, No. 11, pp. 2891-2903. https://doi.org/10.1016/0017-9310(92)90309-G
  7. J. C. Han and Y. M. Zhang, 1992, "High Performance Heat Transfer Ducts with Parallel Broken and V-Shaped Broken Ribs," Int. J. Heat Mass Transfer, Vol. 35, No. 2, pp. 513-523. https://doi.org/10.1016/0017-9310(92)90286-2
  8. R. T. Kukreja, S. C. Lau and R. D. Mcmillin, 1993, "Local Heat/Mass Transfer Distribution in a Square Channel with Full and V-Shaped Ribs," Int. J. Heat Mass Transfer, Vol. 36, No. 8, pp. 2013-2020. https://doi.org/10.1016/S0017-9310(05)80132-2
  9. K.-M. Kim, S.-I. Kim, D.-H. Rhee and H.-H. Cho, 2005, "Experimental Study of Heat/Mass Transfer in Rotating Cooling Passages with Discrete Ribs," Trans. Korean Soc. Mech. B, Vol. 29, No. 5, pp. 590-598. https://doi.org/10.3795/KSME-B.2005.29.5.590
  10. S. Kakac and H. Liu, 2002, Heat exchangers: selection, rating, and thermal design, New York, USA.

Cited by

  1. 2014년 압축기 분야 연구동향 vol.18, pp.2, 2015, https://doi.org/10.5293/kfma.2015.18.2.076