DOI QR코드

DOI QR Code

Characteristics of joint resistance with different kinds of HTS tapes for heater trigger switch

  • Received : 2014.02.05
  • Accepted : 2014.03.27
  • Published : 2014.03.31

Abstract

Recently, many researches on the system of superconducting power supply and superconducting magnetic energy storage (SMES) using high temperature superconducting (HTS) tapes has been progressed. Those kinds of superconducting devices use the heater trigger switches that have a control delay problem at moments of heating up and cooling down. One way to reduce the time delay is using a different HTS tape at trigger part. For example, HTS tape having lower critical temperature can reduce time delay of heating up and heating down stage for heater trigger operation. This paper deals with resistances joint with different kinds of HTS tapes which have different properties to verify usefulness of the suggested method. Three kinds of commercial HTS tapes with different specifications are selected as samples and two kinds of solders are used for comparison. Joint is performed with temperature and pressure controllable joint machine and the joint characteristics are analyzed under the repeatable conditions.

Keywords

References

  1. Hyun Chul Jo, Seong Eun Yang, Young Jae Kim, Ki Sung Chang, Jae Young Jang, Yong Soo Yoon, Yoon Do Chung, Ho Min Kim, and Tae Kuk Ko, "Experimental Analysis of Flux Pump for Compensating Current Decay in the Persistent Current Mode Using HTS Magnet," IEEE Transactions on Applied Superconductivity, vol. 20, no. 3, pp. 1693-1696, 2010. https://doi.org/10.1109/TASC.2010.2040474
  2. Jun Lu, Ke Han, William R. Sheppard, Youri L. Viouchkov, Kenneth W. Pickard, and William Denis Markiewicz, "Lap Joint Resistance of YBCO Coated Conductors," IEEE Transactions on Applied Superconductivity, vol. 21, no. 3, pp. 3009-3012, 2011. https://doi.org/10.1109/TASC.2010.2091934
  3. S. H. Park, H.-S. Chang, Y. S Kim, S. Y. Shim, S. J. Oh, H. C. Kim, S. H. Bang, and H.-C. Ri, "I-V characteristics and contact resistance of jointed BSCCO tape," Proceeding of the Korea Institute of Applied Superconductivity and Cryogenics Conference, pp.163-164, Feb. 2002.
  4. Hyung Jun Kim, Hyun Chul Jo, Ki Sung Chang, Min Kyu Yang, Min Cheol Ahn, and Tae Kuk Ko, "A Study on a Splice Method of YBCO Coated Conductors with Curvature for HTS Magnet Application," Progress in Superconductivity and Cryogenics, vol. 12, no. 1, pp. 17-21, Mar. 2010.
  5. G. J. Homer, P. J. Houzego, C. A. Scott, and M.N. Wilson, "A Thermally Switched Flux pump," IEEE Transactions on Magnetics, vol. MAG-11, no. 2, pp. 576-579, Mar. 1975.
  6. Dong Keun Park, Min Cheol Ahn, Ho Min Kim, H. G. Lee, Ki Sung Chang, Sand Jin Lee, Seong Eun Yang, and Tae Kuk Ko, "Analysis of a Joint Method Between Superconducting YBCO Coated Conductors," IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 3266-3269, Jun. 2007. https://doi.org/10.1109/TASC.2007.899590
  7. Carlos A. Baldan, Ulisses R. Oliveira, Carlos Y. Shigue, and Ernesto Ruppert Filho, "Evaluation of Electrical Properties of Lap Joints for BSCCO and YBCO Tapes," IEEE Transactions on Applied Superconductivity, vol. 19, no. 3, pp. 2831-2834, Jun. 2009. https://doi.org/10.1109/TASC.2009.2017701
  8. T. A. Nguty, S. Budiman, D. Rajkumar, R. Solomon and N. N. Ekere, "Understanding the Process Window for Printing Lead-Free Solder Pastes," Electronic Components & amp; Technology Conference, 50th, NO. 2, pp. 1426-1435, May 2000.
  9. G. Celentano, A. Augieri, A. Mauretti, A. Vannozzi, A. Angrisani Armenio, V. Galluzzi, S. Gaudio, A. Mancini, A. Rufoloni, I. Davoli, C. Del Gaudio, and F. Nanni, "Electrical and Mechanical Characterization of Coated Conductors Lap Joints," IEEE Transactions on Applied Superconductivity, vol. 20, no. 3, pp. 1549-1552, Jun. 2010. https://doi.org/10.1109/TASC.2010.2043833