DOI QR코드

DOI QR Code

Preparation and characterization of a thermal responsive of poly(N-isopropylacrylamide)/chitosan/gelatin hydrogels

  • Baghaei, Shaghayegh (Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University) ;
  • Khorasani, Mohammad T. (Biomaterial Department of Iran Polymer and Petrochemical Institute)
  • Received : 2014.05.04
  • Accepted : 2014.06.30
  • Published : 2014.06.25

Abstract

Synthesis of interpenetrating polymer network (IPN) of chitosan-gelatin (Cs-Ge) (as a primary network) and N-isopropylacrylamide (NIPAAm) monomer (as the secondary network) was carried out with different ratio. Its structure was characterized by FT-IR, which indicated that the IPN was formed. The memberanes were studied by swelling, weight loss with time. The interior morphology of the IPN hydrogels was revealed by scanning electron microscopy (SEM); the IPN hydrogels showed a interpenetrated network of NIPAAm/chitosan has layers with more minute stoma and canals compared to interpenetrated network of NIPAAm/gelatin. Lower critical solution temperature (LCST), equilibrium swelling ratio (ESR) and deswelling kinetics were measured. The DSC results noticed that LCST of IPN hydrogels with different ratio of Cs/Ge/PNIPAAm are around $33{\pm}2^{\circ}C$. The ESR obtained results showed that with a ratio of Cs/Ge/NIPAAm: 1/1/6, the swelling ratio increased drastically from room temperature to $36^{\circ}C$ but with a ratio of Cs/Ge/PNIPAAm: 1/3/6, decrease significantly at the same condition. Therefore the hydrogels have been changed from a hydrophilic structure to a hydrophobic structure. Furthermore with an increase in temperature from room to the LCST, the ESR of IPN with higher concentration of (PNIPAAm) and (Ge) decreases but de-swelling kinetics of them are faster. Due to the suitable and different kinetics of de-swelling and the equilibrium swelling ratio (ESR) in various proportions, and because of the morphology inside the mass which confirms other tests, these hydrogels are very appropriate as a smart thermosensitive hydrogels with rapid response.

Keywords

References

  1. Bao, H., Li, L., Leong, W.C. and Gan, L.H. (2010), "Thermo-responsive association of chitosan-graftpoly( N-isopropylacrylamide) in aqueous solutions", J. Phys. Chem. B, 114(32), 10666-10673. https://doi.org/10.1021/jp105041z
  2. Carreira, A.S., Goncalves, F.A.M.M., Mendonca, P.V., Gil, M.H. and Coelho, J.F.J. (2010), "Temperature and pH responsive polymers based on chitosan: applications and new graft copolymerization strategies based on living radical polymerization", Carbohyd. Polym., 80(3), 618-630. https://doi.org/10.1016/j.carbpol.2009.12.047
  3. Chen, J., Sun, J., Yang, L., Zhang, Q., Zhu, H., Wu, H., Hoffman, A.S. and Kaetsu, I. (2007), "Preparation and characterization of a novel IPN hydrogel memberane of poly(N-isopropylacrylamide)/carboxymethyl chitosan (PNIPAAM/CMCS)", Radiat. Phys. Chem., 76(8-9), 1425-1429. https://doi.org/10.1016/j.radphyschem.2007.02.045
  4. Chen, J., Kuo, C. and Lee, W. (2012), "Thermo-responsive wound dressings by grafting chitosan and poly(N-isopropylacrylamide) to plasma-induced graft polymerization modified non-woven fabrics", Appl. Surf. Sci., 262, 95-101. https://doi.org/10.1016/j.apsusc.2012.02.106
  5. Dusek, K. (1993), Advances in Polymer Science, Responsive Gels, Volume Transitions II, Springer, Berlin.
  6. Greever, L.M., Devine, D.M., Nugent, J.D., Kennedy, J.E., Lyons, J., A. Hanley. and Higginbotham, C.L. (2006), "Lower critical solution temperature control and swelling behavior of physically crosslinked thermosensitive copolymers based on N-isopropylacrylamide", Eur. Polym. J., 42(10), 2540-2548. https://doi.org/10.1016/j.eurpolymj.2006.06.002
  7. Jaiswal, M.K., Banerjee, R., Pradhan, P. and Bahadur, D. (2010), "Thermal behavior of magnetically modalized poly(N-isopropylacrylamide)-chitosan based nanohydrogel", Colloids Surf. B: Biointerfaces, 81(1), 185-194. https://doi.org/10.1016/j.colsurfb.2010.07.009
  8. Jinghong, M., Xu, Y., Zhang, Q., Zha, L. and Liang, B. (2007), "Preparation and characterization of pH- and temperature responsive semi-IPN hydrogels of carboxymethyl chitosan with poly(N-isopropyl acrylamide) crosslinked by clay", Colloid Polym. Sci., 285(4), 479-484.
  9. Kaneko, Y., Sakai, K., Kikuchi, A., Yoshida, R., Sakurai, Y. and Okano, T. (1995), "Influence of freely mobile grafted chains length on dynamic properties of comb-type grafted poly(N-isopropylacrylamide) hydrogels", Macromolecules, 28(23),7717-7723. https://doi.org/10.1021/ma00127a018
  10. Li, F., Wu, H., Zhang, H., Li, F., Gu, C.H. and Yang, Q. (2009), "Antitumor drug Paclitaxel-loaded pHsensitive nanoparticles targeting tumor extracellular pH", Carbohyd. Polym., 77(4), 773-778. https://doi.org/10.1016/j.carbpol.2009.02.029
  11. Liu, M., Su, H. and Tan, T. (2012) "Synthesis and properties of thermo- and pH-sensitive poly(N- isopropylacrylamide)/polyaspartic acid IPN hydrogels", Carbohyd. Polym., 87(4), 2425-2431. https://doi.org/10.1016/j.carbpol.2011.11.010
  12. Mishra, D., Bhunia, B., Banerjee, I., Datta, P., Dhara, S. and Maiti, T.K. (2011), "Enzymatically crosslinked carboxymethyl-chitosan/gelatin/nano-hydroxyapatite injectable gels for in situ bone tissue engineering application", Mater. Sci. Eng., C, 31(7), 1295-1304. https://doi.org/10.1016/j.msec.2011.04.007
  13. Osada, Y., Okuzaki, H. and Hori, H. (1992), "A polymer gel with electrically driven motility", Nature, 355, 242-244. https://doi.org/10.1038/355242a0
  14. Rejinold, N.S., Sreerekha, P.RR., Chennazhi, K.P., Nair, S.V. and Jayakumar, R. (2011), "Biocompatible, biodegradable and thermo-sensitive chitosan-g-poly(N-isopropylacrylamide) nanocarrier for curcumin drug delivery", Int. J. Biol. Macromol., 49(2), 161-172. https://doi.org/10.1016/j.ijbiomac.2011.04.008
  15. Save, N.S., jassal, M. and Agrawal, A.K. (2005), "Stimuli sensitive copolymer poly(Ntertbutylacrylamideran- acrylamide): synthesis and characterization", J. Appl. Polym. Sci., 95(3), 7979-7987.
  16. Temtem, M., Barroso, T., Casimiro, T., Mano, J.F.A. and Ricardo, A.A. (2012), "Dual stimuli responsive poly(N-isopropylacrylamide) coated chitosan scaffolds for controlled release prepared from a non residue technology", J. Supercrit. Fluids, 66, 398-404. https://doi.org/10.1016/j.supflu.2011.10.015
  17. Yu, Y., Liu, Y., Kong, Y., Zhang, E., Jia, F. and Li, S. (2012), "Synthesis and characterization of temperature-sensitive poly(N-isopropylacryamide) hydrogel with comonomer and semi-IPN material", Polym. Plastics Tech, Eng., 51(8), 854-860. https://doi.org/10.1080/03602559.2012.671419
  18. Zhang, X.Z. and Chu, C.C. (2003), "Synthesis and characterization ofthe semi-IPN-like PNIPAAm gel with improved response rate", J. Appl. Polym. Sci., 89(3), 1935-1941. https://doi.org/10.1002/app.12378
  19. Zhao, S., Li, L., Cao, M., Xu, W. (2011), "pH- and thermo-sensitive semi-IPN hydrogels composed of chitosan, N-isopropylacrylamide, and poly(ethylene glycol)-co-poly($\varepsilon$-caprolactone) macromer for drug delivery", Polym. Bull., 66(8), 1075-1087. https://doi.org/10.1007/s00289-010-0390-y

Cited by

  1. Synthesis and characterization of a temperature-sensitive hydrogel based on sodium alginate and N-isopropylacrylamide vol.26, pp.11, 2015, https://doi.org/10.1002/pat.3682