Smart Structures and Systems

  • 제13권3호
  • /
  • Pages.419-434
  • /
  • 2014
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation of the semi-active electromagnetic damper

  • Montazeri-Gh, Morteza (Department of mechanical engineering, systems simulation and control laboratory, IUST) ;
  • Kavianipour, Omid (Department of mechanical engineering, systems simulation and control laboratory, IUST)
  • 투고 : 2012.06.19
  • 심사 : 2013.05.17
  • 발행 : 2014.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the electromagnetic damper (EMD), which is composed of a permanent-magnet rotary DC motor, a ball screw and a nut, is considered to be analyzed as a semi-active damper. The main objective pursued in the paper is to study the two degrees of freedom (DOF) model of the semi-active electromagnetic suspension system (SAEMSS) performance and energy regeneration controlled by on-off and continuous damping control strategies. The nonlinear equations of the SAEMSS must therefore be extracted. The effects of the EMD characteristics on ride comfort, handling performance and road holding for the passive electromagnetic suspension system (PEMSS) are first analyzed and damping control strategies effects on the SAEMSS performance and energy regeneration are investigated next. The results obtained from the simulation show that the SAEMSS provides better performance and more energy regeneration than the PEMSS. Moreover, the results reveal that the on-off hybrid control strategy leads to better performance in comparison with the continuous skyhook control strategy, however, the energy regeneration of the continuous skyhook control strategy is more than that of the on-off hybrid control strategy (except for on-off skyhook control strategy).

키워드

참고문헌

  1. Ahmadian, M. (1997), "A hybrid semi-active control for secondary suspension applications", Proceedings of the 6th ASME Symposium on Advanced Automotive Technologies, ASME International Congress and Exposition, November.
  2. Chen, S., He, R. and Lu, S. (2006), "Operation theory and structure evaluation of reclaiming energy suspension", T. Chinese Soc. Agric. Machin., 37(5), 5-9 (in Chinese).
  3. Chen, S., He, R. and Lu, S. (2007), "New reclaiming energy suspension and its working principle", Chinese J. Mech. Eng., 13(11), 177-182 (in Chinese).
  4. Graves, K.E. (2000), Electromagnetic energy regenerative vibration damping, Ph.D. Dessertation, Industrial Research Institute Swinbume, Swinburne University of Technology Hawthorn, Victoria, Australia.
  5. Gupta, A., Mulcahy, T.M. and Hull, J.R. (2003), "Electromagnetic shock absorbers", Proceedings of the 21th International Modal Analysis Conference Kissimmee, FL, USA.
  6. Gupta, A., Jendrzejczyk, J.A., Mulcahy, T.M. and Hull, J.R. (2006), "Design of electromagnetic shock absorbers", Int. J. Mech, Mater. Des., 3(3), 43-54.
  7. Hayashi, R., Suda, Y. and Nakano, K. (2008), "Anti-rolling suspension for an automobile by coupled electromagnetic devices", J. Mech. Syst. T. Logistics, 1(1), 524-535.
  8. ISO 8608 (1995), Mechanical vibration - road surface profiles - reporting of measured data.
  9. ISO 2631-1 (1997), Mechanical vibration and shock - evaluation of human exposure to whole-body vibration.
  10. Jones, W. (2005), "Easy ride: Bose Corp. uses speaker technology to give cars adaptive suspension", IEEE Spectrum, 42(5), 12-14.
  11. Karnopp, D. (1989), "Permanent magnet linear motors used as variable mechanical dampers for vehicle suspensions", Vehicle. Syst. Dyn., 18(4), 187-200. https://doi.org/10.1080/00423118908968918
  12. Kawamoto, Y., Suda, Y., Inoue, H. and Kondo, T. (2007), "Modeling of electromagnetic damper for automobile suspension", J. Syst. Des. Dyn., 1(3), 524-535.
  13. Mahfoud, J. and Der Hagopian, J. (2012), "Investigations on critical speed suppressing by using electromagnetic actuators", Smart Struct. Syst., 9(4), 303-311. https://doi.org/10.12989/sss.2012.9.4.303
  14. Martins, I., Esteves, M., Pina Da Silva, F. and Verdelho, P. (1999), "Electromagnetic hybrid active-passive vehicle suspension system", Proceedings of the 49th Vehicular Technology Conference, IEEE, Houston, Texas, USA.
  15. Martins, I., Esteves, J., Marques, G.D. and Pina da Silva, F. (2006), "Permanent-magnets linear actuators applicability in automobile active suspensions", IEEE T. Veh. Technol., 55(1), 86-94. https://doi.org/10.1109/TVT.2005.861167
  16. Montazeri-Gh, M. and Soleymani, M. (2010), "Investigation of the energy regeneration of active suspension system in hybrid electric vehicles", IEEE T. Ind. Electron., 57(3), 918-925. https://doi.org/10.1109/TIE.2009.2034682
  17. Montazeri-Gh, M. and Kavianipour, O. (2012), "Investigation of the passive electromagnetic damper", Acta Mech, 223(12), 2633-2646. https://doi.org/10.1007/s00707-012-0735-8
  18. Nakano, K., Suda, Y. and Nakadai, S. (2003), "Self-powered active vibration control using a single electric actuator", J. Sound. Vib., 260(2), 213-235. https://doi.org/10.1016/S0022-460X(02)00980-X
  19. Nakano, K. and Suda, Y. (2004), "Combined type self-powered active vibration control of truck cabins", Vehicle. Syst. Dyn., 41(6), 449-473. https://doi.org/10.1080/00423110512331383858
  20. Okada, Y. and Harada, H. (1995), "Active and regenerative control of electrodynamic vibration damper", Proceedings of the 1995 Design Engineering Technical Conference, ASME, Boston, Massachusetts, USA.
  21. Okada, Y. and Harada, H. (1996), "Regenerative control of active vibration damper and suspension systems", Proceedings of the 35th IEEE Conference on Decision and Control, Kobe, Japan.
  22. Okada, Y., Harada, H. and Suzuki, K. (1996), "Active and regenerative control of linear DC motor type damper", Proceedings of the 3rd International Conference on Motion and Vibration Control, JSME, Chiba.
  23. Okada, Y., Harada, H. and Suzuki, K. (1997), "Active and regenerative control of an electrodynamic-type suspension", JSME Int. J. C - dynamics, control, robotics, design and manufacturing, 40(2), 272-278.
  24. Ryba, D. (1993), "Semi-active damping with an electromagnetic force generator", Vehicle. Syst. Dyn., 22(2), 79-95.
  25. Suda, Y. and Shiba, T. (1996), "A new hybrid suspension system with active control and energy regeneration", Vehicle. Syst. Dyn., 25, 641-654. https://doi.org/10.1080/00423119608969226
  26. Suda, Y., Nakadai, S. and Nakano, K. (1998), "Study on the self-powered active vibration control", Proceedings of the 4th international conference on motion and vibration control (MOVIC), Zurich, Switzerland.
  27. Suda, Y., Nakadai, S. and Nakano, K. (1998), "Hybrid suspension system with skyhook control and energy regeneration (development of self-powered active suspension)", Vehicle. Syst. Dyn., 29(1), 619-634. https://doi.org/10.1080/00423119808969590
  28. Suda, Y., Suematsu, K., Nakano, K. and Shiba, T. (2000), "Study on electromagnetic suspension for automobiles - simulation and experiments of performance", Proceedings of the 5th International Symposium on Advanced Vehicle Control, Ann Arbor, Michigan, USA.
  29. Shamsi, A. and Choupani, N. (2008), "Continuous and discontinuous shock absorber control through skyhook strategy in semi-active suspension system (4DOF Model)", Eng. Technol., 41, 745-749.
  30. Wong, J.Y. (2001), Theory of ground vehicles, (3rd Ed.), Wiley, Canada.
  31. Wu, Z. and Cao, Y. (2007), "Brief introduction to structure and principle of electromagnetic shock absorber", Motor Technology, 8, 56-59.
  32. Zhang, Y., Huang, K., Yu, F., Gu, Y. and Li, D. (2007), "Experimental verification of energy-regenerative feasibility for an automotive electrical suspension system", IEEE, 1-5.
  33. Zhang, Y., Yu, F., Gu, Y. and Zheng, X. (2008), "Isolation and energy regenerative performance experimental verification of automotive electrical suspension", J. Shanghai Jiaotong Univ., 42(6), 874-877.
  34. Zhang, Y., Yu, F. and Huang, K. (2009), Permanent-magnet DC motor actuators application in automotive energy-regenerative active suspension, SAE Technical Paper.

피인용 문헌

  1. Effects of the passive electromagnetic damper on the behavior of a fluid-conveying pipeline pp.2041-2983, 2019, https://doi.org/10.1177/0954406218784627
  2. Vibration reduction of a pipe conveying fluid using the semi-active electromagnetic damper vol.6, pp.2, 2014, https://doi.org/10.12989/csm.2017.6.2.175