Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Elastic Wave Generated by Wear and Friction of SiCf/SiC Composites

SiCf/SiC 복합재의 마모 및 마찰에 의해 발생된 탄성파 특성

  • Moon, Chang-Kwon (Dept. of Materials Science and Engineering, Pukyong National University) ;
  • Nam, Ki-Woo (Dept. of Materials Science and Engineering, Pukyong National University)
  • Received : 2014.01.21
  • Accepted : 2014.02.19
  • Published : 2014.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The wear characteristics of $SiC_f$/SiC composites were evaluated according to the alignment direction of the fibers, and the elastic wave-generated friction was detected and analyzed in wearing. The friction coefficient and wear loss were similar in the longitudinal and the transverse direction of the fibers. However, these values were lower in the vertical direction of the fibers because of the brittle nature of the fiber. The friction coefficient and the wear loss were directly proportional to each other. The dominant frequencies were 58.6 kHz for monolithic SiC and 117.2 and 136.7 kHz for $SiC_f$/SiC composites, respectively.

$SiC_f$/SiC 복합재를 제작하여, $SiC_f$/SiC 복합재의 섬유배향 방향에 따르는 마모 특성을 평가하고, 마모시에 발생하는 탄성파를 검출하고 분석하였다. $SiC_f$/SiC 복합재는 섬유의 종 횡방향에 의한 마찰계수와 마모손실은 비슷하였으나, 섬유의 수직방향은 가장 작은 값을 나타내었다. 이것은 섬유의 취성 특성 때문이라 판단되며, 마모손실과 마찰계수는 정비례의 관계를 나타내었다. SiC 단상재의 탁월주파수는 58.6 kHz를 나타내고, $SiC_f$/SiC 복합재의 탁월주파수는 117.2와 136.7 kHz였다.

Keywords

References

  1. S. Sharafat, R.H. Jones, A. Kohyama and P. Fenici, "Status and prospects for SiC/SiC composite materials development for fusion applications," Fusion Engineering and Design, Vol. 29, pp. 411-420 (1995) https://doi.org/10.1016/0920-3796(95)80047-2
  2. L. L. Snead, R. Jones, A. Kohyama and P. Fenici, "Status of silicon carbide composites for fusion," J. Nucl. Mater., Vol. 233, pp. 26-36 (1996)
  3. D. Brewer, "HSR/EPM combustor materials development program," J Mater Sci Eng., Vol. A261, pp. 284-291 (1999)
  4. R. H. Jones, L. L. Snead, A. Kohyama and P. Fenici, "Recent advances in the development of SiC/SiC as a fusion structural material," Fusion Eng. Des., Vol. 41, pp. 15-24 (1998) https://doi.org/10.1016/S0920-3796(98)00285-3
  5. A. R. Raffray, R. Jones, G. Aeill, C. Billone, L. Giancarli, H. Golfer, A. Hasegawa, Y. Katoh, A. Kohyama, S. Nishio, B. Riccardi and M. S. Tillack, "Design and material issues for high performance SiCf/SiC-based fusion power cores," Fusion Eng. Des., Vol. 55, pp. 55-95 (2001) https://doi.org/10.1016/S0920-3796(01)00181-8
  6. K. W. Nam, K. C. Lee and A. Kohyama, "A feasibility study on the application of ultrasonic method for surface crack detection of SiC/SiC composite ceramics," Journal of the KSNT, Vol. 29, No. 5, pp. 479-484 (2009)
  7. K. W. Nam, J. W. Kim, T. Hinoki, A. Kohyama, J. Murai and T. Murakami, "Application of ultrasonic inspection to characterization of advanced SiC/SiC composites," Journal of Nuclear Materials, Vol. 417, pp. 353-355 (2011) https://doi.org/10.1016/j.jnucmat.2010.12.076
  8. K. W. Nam, C. K. Moon and I. S. Seo, "A fundamental study for the crack healing of SiC ceramics and SiCf/SiC composite ceramics," Journal of Ceramic Processing Research, Vol. 12, No. 6, pp. 646-649 (2011)
  9. J. W. Kim, B. W. Park, S. H. Ahn and K. W. Nam, "Elastic wave signal characteristics of SiC ceramics with crack healing ability by wavelet analysis," Key Engineering Materials, Vol. 297-300, pp. 2046-2051 (2005) https://doi.org/10.4028/www.scientific.net/KEM.297-300.2046
  10. K. W. Nam, M. K. Kim, H. S. Kim, J. W. Kim and S. H. Ahn, "Bending strength of Si3N4 monolithic and $Si_3N_4/SiC$ composite ceramics and elastic wave characteristics by wavelet analysis," International Journal of Modern Physics B, Vol. 20, pp 4279-4284 (2006) https://doi.org/10.1142/S0217979206041227
  11. H. S. Kim, M. K. Kim, J. W. Kim, S. H. Ahn and K. W. Nam, "Strength of crack healed-specimen and elastic wave characteristics of $Al_2O_3/SiC$ composite ceramics," Trans. Korean Soc. Mech. Eng. A, Vol. 31, pp. 425-431 (2007) https://doi.org/10.3795/KSME-A.2007.31.4.425
  12. J. W. Kim, S. H. Ahn and K.W. Nam, "The characteristics of acoustic emission of $Al_2O_3$ ceramics by an amount of additive $Y_2O_3$", J. Ocean Engineering and Technology, Vol. 22, pp. 71-75 (2008)
  13. A. Hasegawa, A. Kohyama, R. H. Jones, L. L. Snead, B. Riccardi and P. Fenici, "Critical issues and current status of SiC/SiC composites for fusion," Journal of Nuclear Materials, Vol. 283-287, pp. 128-137 (2000) https://doi.org/10.1016/S0022-3115(00)00374-3
  14. ASTM D2714 - 94, "Standard test method for calibration and operation of the falex block-on-ring friction and wear testing Machine," (2009)
  15. D. E. Newland, "An Introduction to Random Vibrations, Spectral and Wavelet Analysis," Wiley, pp. 348-353 (1993)