한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제27권3호
  • /
  • Pages.189-194
  • /
  • 2014
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

저온 전도성 필름으로 본딩된 태양광 모듈의 특성 평가 및 실증 연구

Characterization of Low-temperature Conductive Films Bonded PV Modules and Its Field Test

  • 백수웅 (녹색에너지연구원 기술사업실) ;
  • 최광일 (녹색에너지연구원 기술사업실) ;
  • 이석호 (녹색에너지연구원 기술사업실) ;
  • 전찬혁 ((주)아론 태양광사업부) ;
  • 홍승민 ((주)아론 태양광사업부) ;
  • 이길송 (쏠라테크(주) 연구개발부) ;
  • 신현우 (쏠라테크(주) 연구개발부) ;
  • 양연원 (쏠라테크(주) 연구개발부) ;
  • 임철현 (녹색에너지연구원 기술사업실)
  • 투고 : 2014.01.13
  • 심사 : 2014.02.24
  • 발행 : 2014.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, PV modules using a low-temperature conductive film(LT-CF) as a bonding material between a cell and a solder free ribbon were produced and chracterized, which is more environmental-friendly, cost effective and high efficient. Mainly, filed electrical performance of PV modules using three different types of bonding material; a convetional solder ribbon(SR), a LT-CF and a light-capturing Ribbon(LCR) were compared to comfirm the feasibility of LT-CF as a bonding material. The filed test were conducted for 3 months and results were discussed in terms of amount of output energy production and efficiency.

키워드

참고문헌

  1. D. Nikolic, M. Bojic, J. Skerlic, J. Radulovic, and M. Miletic, A Review of Silicon Solar Cells in Photovoltaics Technology (Center for Quality, Faculty of Engineering, University of Kragujevac, 2013)
  2. A. M. Gabor, M. Ralli, S. Montminy, L. Alegia, C. Bordonaro, J. Woods, and L. Felton, 21st European Photovoltaic Solar Enegy Conference (Dresden, 2006)
  3. M. Kontges, I. Kunze, S. Kajari-Schroder, X. Breitenmoster, and B. Bjorneklett, Sol. Energ. Mat. Sol. C., 95, 1131 (2011). https://doi.org/10.1016/j.solmat.2010.10.034
  4. Sakamoto, Tomonari, K. Hisamoto, and E. T. O. U. Hirotoshi, U.S. Patent Application 12/725,289.
  5. Shimizu, Shigenori, U.S. Patent Application 13/217,666.
  6. G. H. Kang, G. J. Yu, H. K. Ahn, and D. Y. Han J. KIEEME, 17, 1289 (2004).
  7. M. Kontges, Origin and Consequences of (Micro)-Cracks in Crystalline silicon Solar modules (PV Module Reliability Workshop, 2011)
  8. S. J. Kim, J. Y. Choi, J. H. Kong, J. H. Moon, S. H. Lee, W. H. Shim, E. H. Lee, E. J. Lee, and H. S. Lee, The Korean Solar Energy Society, 31, 303 (2011).
  9. Chen and C. Hung, International Symposium on Solar Cell Technologies (Taipei, Taiwan, 2008)
  10. Chaturvedi, Pooja, B. Hoex, and T. M. Walsh, Sol. Energ. Mat. Sol. C., 108, 78 (2013). https://doi.org/10.1016/j.solmat.2012.09.013
  11. Wootton and R. Gerald, U.S. Patent No. 20,120,247,554. 4 Oct. 2012.