한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)

  • 제15권2호
  • /
  • Pages.1216-1221
  • /
  • 2014
  • /
  • 1975-4701(pISSN)
  • /
  • 2288-4688(eISSN)
한국산학기술학회 (The Korea Academia-Industrial cooperation Society)
권호 표지
DOI QR코드

DOI QR Code

Isosorbide가 함유된 바이오 기반 PET와 polycarbonate 블렌드의 제조 및 특성 연구

Preparation and characterization of isosorbide based PET/polycarbonate blends

  • 박지수 (한국기술교육대학교 에너지.신소재.화학공학부 응용화학공학과) ;
  • 남병욱 (한국기술교육대학교 에너지.신소재.화학공학부 응용화학공학과) ;
  • 박준서 (한국기술교육대학교 에너지.신소재.화학공학부 응용화학공학과)
  • Park, Ji-Soo (Department of Applied Chemical Engineering, School of Energy.Materials.Chemical Engineering, Korea University of Technology and Education) ;
  • Nam, Byeong-Uk (Department of Applied Chemical Engineering, School of Energy.Materials.Chemical Engineering, Korea University of Technology and Education) ;
  • Park, Jun-Seo (Department of Applied Chemical Engineering, School of Energy.Materials.Chemical Engineering, Korea University of Technology and Education)
  • 투고 : 2013.10.28
  • 심사 : 2014.02.05
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PEIT는 옥수수와 같은 재생 가능한 자원에서 유래한 isosorbide monomer를 이용하여 bio-contents를 함유하고 있는 PET이다. 하지만 isosorbide contents가 향상될수록 기계적물성이 감소하는 단점이 있다. 본 연구에서는 우수한 기계적 물성을 가지고 있는 polycarbonate를 이용하여 PEIT의 단점을 보완하고, 또한 PEIT를 이용하여 PC의 인장신율 향상을 통해 성형가공성을 개선하고자 하였다. 이축압출기를 통해 제조한 PEIT/PC 블렌드에서 polycarbonate가 모폴로지, 유리전이온도거동, 열적안정성 및 기계적 물성에 미치는 영향을 확인하기 위해 FE-SEM, DMA, TGA, UTM 및 Izod impact tester를 통하여 분석을 수행하였다. 이로써 우수한 기계적 물성을 가진 polycarbonate는 PEIT와 상용성이 있음을 확인하였으며, 특히 PEIT25PC75 조성에서 열적 안정성 및 기계적 특성의 향상이 뛰어난 것을 알 수 있었다.

Poly(ethylene-co-isosorbide terephthalate) (PEIT) is interest in polymer which has isosorbide monomer that is renewable resources such as corn. However, there is important drawback which is low mechnical properties as increasing isosorbide contents. In this study, polycarbonate used to make up for drawback of mechanical properties of PEIT. In addition, PEIT used to improve the tensile elongation of polycarbonate because PEIT has good sheet proccessability. The effect of polycarbonate on morphology, thermal and mechanical properties were investigated using FE-SEM, DMA, TGA, UTM, and notched izod impact strength tester. As a result of this study, PEIT/PC blends were in compatible system and polycarbonate can act as an improvement of thermal stability and mechanical properties in the blends.

키워드

참고문헌

  1. J. A. Douglas, F. C. Larry, U. Sophie, "Process for making poly(ethylene-co-isosorbide) terephthalate polymer", US Patent 6,646,577 B1, 2003.
  2. V. K. Joseph, L. Yuanfeng, "Ester-modified dicarboxylate polymers", US Patent 6,737,481 B1, 2004.
  3. J. A. Douglas, N. G. Robin, E. P. Donald, "Poly(1,3-propylene-co-1,4:3,6-dianhydro-D-sorbitol terephthalate) and manufacturing process", US Patent 2003-0232960 A1, 2003.
  4. H. R. Kricheldorf, G. Behnken, "Influence of isosorbide on Glass-Transition Temperature and Crystallinity of Poly(butylene terephthalate)", Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, vol.44, pp.679-684, 2007. DOI: http://dx.doi.org/10.1080/10601320701351128
  5. R. Sablong, R. Duchateau, C. Koning, G. Wit, G. de, Es, D. s. Van, Kolewijn, "Incorporation of isosorbide into poly(butylene terephthalate) via solid-state polymerization", Biomacromolecules, vol.9, pp.3090-3097, 2008. DOI: http://dx.doi.org/10.1021/bm800627d
  6. B. A. J. Noordover, V. G. van Staalduinen, R. Duchateau, C. E. Koning, B. van, M. Mak, A. Heise, A. E. Frissen, J. van Haveren, "Co-and terpolyesters based on isosorbide and succinic acid for coating applications: Synthesis and characterization", Biomacromolecules, vol.7, pp.3406-3416, 2006. DOI: http://dx.doi.org/10.1021/bm060713v
  7. J. Haveren, E. a. Oostveen, F. Micciche, B. a. J. Noordover, C. E. Koning, R. a. T. M. Benthem, a. E. Frissen, J. G. J. Weijnen, "Resins and additives for powder coatings and alkyd paints, based on renewable resources", Journal of Coatings Technology and Research, vol.4, pp.177-186, 2007. DOI: http://dx.doi.org/10.1007/s11998-007-9020-5
  8. R. M. Gohil, "Properties and strain hardening character of polyethylene terephthalate containing Isosorbide", Polymer Engineering & Science, vol.49, pp.544-553, 2009. DOI: http://dx.doi.org/10.1002/pen.20840
  9. G. Khanarian, F. Charbonneau, B. Witteler, E. Johnson, G. Lee, B. Sandor, V. Nelson, "SHEETS FORMED FROM POLYESTERS INCLUDING ISOSORBIDE", EP Patent 1,085,976 B1, 2001.
  10. O. Fuch, J. Brandrup, EH. Immergut, "Polymer handbook 3rd ed", New York: John Wiley and Sons, pp. VII/524-6, 1989
  11. D. W. V. Krevelen, "Properties of polymers", Elsevier Publishers, 1990.
  12. M. O. Jang, S. B. Kim, B. U. Nam, "Transesterification effect on miscibility polycarbonate/poly(butylene adipate-co-terephthalate)blends", Polymer Bulletin, vol.68, pp.287-298, 2012. DOI: http://dx.doi.org/10.1007/s00289-011-0630-9
  13. I. Aravind, A. Boumod, Y. Grohens, S. Thomas, "Morphology, Dynamic Mechanical, Thermal, and Crtstallization Behaviors of Poly(trimethylene terephthalate)/Polycarbonate Blends", Industrial & Engineering Chemistry Research, vol.49, pp.3873-3882, 2010. DOI: http://dx.doi.org/10.1021/ie901767y