한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

  • 제30권2호
  • /
  • Pages.33-42
  • /
  • 2014
  • /
  • 1229-2427(pISSN)
  • /
  • 2288-646X(eISSN)
한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

낮은 구속응력에 대한 주문진 표준사의 강도 및 변형 특성

The Strength and Deformation Characteristics of Jumunjin Sand under Low Confining Stresses

  • 투고 : 2013.08.22
  • 심사 : 2013.11.01
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

매우 낮은 구속응력에서의 모래의 전단강도 및 변형특성은 상대적으로 높은 구속응력의 경우와 매우 상이한 분포를 나타낸다. 따라서 낮은 응력상태를 보이는 지반 위에 놓인 얕은 기초와 제방 등의 안정성, 토석류 혹은 얕은 파괴의 안정성 검토와 실내에서 시행하는 각종 모델시험의 경우 이에 대하여 명확히 규명할 필요가 있다. 본 연구에서는 건조된 주문진 표준사를 대상으로 구속응력을 5kPa~300kPa로 하여 배수 삼축시험을 실시하였으며, 그 결과 내부마찰각(${\phi}$) 및 변형계수($E_s$)가 구속응력(${\sigma}{_c}^{\prime}$)에 따라 크게 변하는 것을 확인하였으며, 이에 따라 구속응력에 대한 조밀 및 느슨한 모래의 내부마찰각과 변형계수의 상관관계식을 제안하였다.

The shear strength and deformation characteristics of granular soils at low confining stresses differ from those with high confining stresses. Thus, the clear understanding of geotechnical problems related to the low confining stress state such as the stability of shallow foundations, embankments, slope failure, debris flow characteristics and liquefaction as well as the various laboratory model tests is needed. In this study, drained triaxial compression tests with the cell pressures from 5 kPa to 300 kPa were performed on dry Jumunjin sand. The results show that the internal friction angle and deformation modulus are dependent on the confining stress. Also, the correlations between them on the dense and loose sand were established.

키워드

참고문헌

  1. Ahn, B.H. (2002), A Study on the Characteristics of the Jumunjin Standard Sand by Triaxial Compression Tests, MSc Thesis, Changwon National University.
  2. ASTM D7181 (2011), "Standard test method for consolidated drained triaxial compression test for soils", ASTM international.
  3. Duncan, J. and Bursey, A. (2013), "Soil Modulus Correlations", Foundation Engineering in the Face of Uncertainty, Geo-Congress 2013, pp.321-336.
  4. Evans, T. M. (2005), "Microscale Physical and Numerical Investigations of Shear Banding in Granular Soils", PhD Dissertation, Georgia Institute of Technology.
  5. Fukushima, S. and Tatsuoka F. (1984), "Strength and deformation characteristics of saturated sand at extremely low pressures", Soils and Foundations, 24(4): pp.30-48. https://doi.org/10.3208/sandf1972.24.4_30
  6. Greeuw, G., Adel, H., Schapers, A., and Haan, E. (2001), "Reduction of Axial Resistance due to Membrane and Side Drains in the Triaxial Test", Soft Ground Technology, pp.30-42.
  7. Hardin, B.O. and Black, W.L. (1966) "Sand stiffness under various triaxial stresses", J. of Soil Mechanics & Foundations Div, Vol.92, SM2, pp.27-42.
  8. Hong, W.P., Song, J.S., and Hong, S.W. (2010), "Punching Shear Failure in Pile-Supported Embankments", J. of the Korean Geotechnical Society, Vol.26, No.3, pp.35-45.
  9. Hoque, E. and Tatsuoka, F. (1998), "Anisotropy in the elastic deformation of materials", Soils and Foundations. (38)1:163-179.
  10. Im, J.C., Lee, T.H., and An, M.H. (2000), "A Study on the Estimation of Internal Friction Angle of Sand Ground through the Bearing Capacity Experiment", J. of Korean Society of Civil Engineers, v.20 n.6-C. pp.495-506.
  11. Jiang, G.L., Tatsuoka, F., Flora, A., and Koseki, J. (1997), "Inherent and stress-state-induced anisotropy in very small strain stiffness of a sandy gravel", Geotechnique, Vol.47, Issue 3, 01 June 1997, pp. 509-521. https://doi.org/10.1680/geot.1997.47.3.509
  12. Ju, J.W., Choi, H.N., Park, J.B., and Park, J.K. (1997), "A Production of Triaxial Specimen and Shear Characteristics of Gumunjin Standard Sand", Proceedings of Korean Society of Civil Engineers, Vol.3, 1997. pp.189-192.
  13. Kohata, Y., Tatsuokaj, F., Wang. L., Jiang, G.L., Hoque, E., and Kodaka, T. (1997), "Modelling the non-linear deformation properties of stiff geomaterials", Geotechnique, Vol.47, Issue 3, 01 June 1997, pp.563-580. https://doi.org/10.1680/geot.1997.47.3.563
  14. Lade, P.V. and Kim, M.K. (1988), "Single hardening constitutive model for frictional materials III. Comparisons with experimental data", Computers and Geotechnics, Vol.6, Issue 1, 1988, pp.31-47. https://doi.org/10.1016/0266-352X(88)90054-7
  15. Lancelot, L., Shahrour, I., and Al Mahmoud, M. (2006), "Failure and Dilatancy Properties of Sand at Relatively Low Stresses", J. of Engineering Mechanics, ASCE, Vol.132, No.12, December 2006, pp.1396-1399. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1396)
  16. Lee, K. P., Matchala, S. and IM, J. C. (2008), "Shear Strength of Jumunjin Sand according to Relative Density", Marine Georesources and Geotechnology, 26: pp.101-110. https://doi.org/10.1080/10641190802022445
  17. Lee, J.H., Lee, D.R., Yun, T.S., and Lee, J.H. (2012), "Evaluation of at Rest Lateral Stress Coefficient Influenced by Particle Condition", J. of Korean Geotechnical Society, Vol.28 No.8, 2012. pp.21-29. https://doi.org/10.7843/kgs.2012.28.8.21
  18. Lee, K. L. (1970), "Comparison of Plane Strain and Triaxial Tests on Sand", J. of Soil Mech. Found. Div., ASCE, Vol.96, no.SM3, pp.901-923.
  19. Macari-Pasqualino, E. J., Runesson, K., and Sture, S. (1994), "Response prediction of granular materials at low effective stresses", J. of Geotechnical Engineering, ASCE, Vol.120, No.7, July, 1994. pp.1252-1268. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:7(1252)
  20. Paik, K.H. and Lee, J.H. (2008), "Calculation of Bearing Capacity of Tapered Drilled Shafts in Cohesionless Soils Using Shape Factor", J. of the Korean Geotechnical Society, Vol.24, No.12, 2008. pp. 13-22.
  21. Park, C.S. and Bae, S.H. (2002), "Deformation and Strength Characteristics of Jumunjin Standard Sand by Triaxial Test", Engineering Research & Technology, Vol.2, pp.399-403.
  22. Park, C.S. and Tatsuoka, F. (1990), "Deformation and strength characteristic under low confining pressure of the Silver Leighton Buzzard sand by plane strain compression test", Poceedings of annual conference, JSCE, Vol.45, 1990.9. pp.742-743 (in Japanese).
  23. Ponce, V. M. and Bell, J. M. (1971), "Shear Strength of Sand at Extremely Low Pressures", J. of the Soil Mechanics and Foundations Division, ASCE, 97(SM4), pp.625-636.
  24. Schanz, T. and Vermeer, P. A. (1998), "On the stiffness of sands- Pre-failure Deformation Behaviour of Geomaterials", Geotechnique 48, pp.383-387.
  25. Tatsuoka, F., Goto, S., and Sakamoto, M. (1986), "Effects of some factors on strength and deformation characteristics of sand at low pressures", Soils and Foundations, Vol.26, No.1, pp.105-114. https://doi.org/10.3208/sandf1972.26.105
  26. Yoon, H.C. (2002), "A study on the stress-dilatancy relationships of sand according to the stress path", MSc Thesis, Kyonggi University (in Korean).