DOI QR코드

DOI QR Code

A Health and Safety Improvement Roadmap for the Construction Industry

  • Diugwu, Ikechukwu A. (Project Management Technology Department, Federal University of Technology) ;
  • Baba, Dorothy L. (Project Management Technology Department, Federal University of Technology)
  • Received : 2013.01.10
  • Accepted : 2014.09.24
  • Published : 2014.03.01

Abstract

Comparatively, the construction industry has, on average, a higher rate of fatal and major injuries, work induced ill-health and damage to properties than other industrial sectors; and this is a source of concern to industry stakeholders. The study showed that although subcontracting could be contributory to an increase in workplace accidents in the construction industry, contractual aspects of subcontracting arrangements (such as the power imbalance that exist along the client-customer interface) also present opportunities for improvements in health and safety management (HSM) practices in organisations. This conclusion was reached after an analysis of a questionnaire survey (with a 27% response rate) that assessed the attitudes and perception to health and safety issues.

Keywords

References

  1. S. J. Egan, "Rethinking Construction: The report ofthe Construction Task Force", Department of Trade and Industry, London, UK, 1998.
  2. Department for Business Enterprise and Regulatory Reform, "Construction Statistics Annual", 2007 ed., London: The Stationery Office (TSO), 2007.
  3. Health and Safety Executive, "Health and safety offences and penalties", UK: Health and Safety Executive, 2005.
  4. International Labour Organization, "Safety and Health at Work", International Labour Organisation, 2010.
  5. Health and Safety Executive. "Construction work related injuries and Ill health", UK: Health and Safety Executive, 2012.
  6. Health and Safety Executive. "Occupational ill health in the construction industry: statistical factsheet", UK: Health and Safety Executive, 2004.
  7. L. Rushton, S. Bagga, R. Bevan, T. Brown, J. Cherrie, P. Holmes, L. Fortunato, S. Hutchings, R. Slack, M.V. Tongeren, C. Young, G.S.Evans, "The burden of occupational cancer in Great Britain: Overview report (RR931)", UK: Health and Safety Executive, 2012.
  8. O.A. Olatunji, N. Bashorun, "A system view of the labour profile structure of the construction industry in the developing countries: Nigeria, a case study", in International Conference in the Built Environment in the 21st Century (ICiBE), Eds. J.V. Torrance, H. Adnan, R. Takim, Kuala Lumpur, Malaysia, 2006.
  9. G. Sharp, "Construction Statistics Annual", No. 11, UK: The Office for National Statistics, 2010.
  10. H. Lingard, N. Holmes, "Understandings of occupational health and safety risk control in small business construction firms: barriers to implementing technological controls", Construction Management and Economics, vol. 19, no. 2, pp. 217-226, 2001. https://doi.org/10.1080/01446190010002570
  11. G.M. Winch, "Managing Construction Projects: An Information Processing Approach", John Wiley & Sons, 2002.
  12. A.Recio, R. de Alos-Moner, I. Olivares, "Construction in Spain: towards a new regulation?", Barcelona: Centre d'Estudis Sociologics sobre la Vida Quotidiana i el Treball (QUIT), Universitat Autonoma de Barcelona, 2006.
  13. Health and Safety Executive, "An analysis of the significant causes of fatal and major injuries in construction in Scotland", Research Paper 443, UK: Health and Safety Executive, 2006.
  14. B. Dave, L. Koskela, "Collaborative knowledge management-a construction case studies", Automation in Construction, vol. 18, no. 7, pp. 894-902, 2009. https://doi.org/10.1016/j.autcon.2009.03.015
  15. A. El-Sheik, S.D. Pryke, "Network gaps and project success", Construction Management and Economics, vol. 28, no. 12, pp. 1205-1217, 2010. https://doi.org/10.1080/01446193.2010.506643
  16. C.Mayhew, M. Quinlan, "The effects of outsourcing on occupational health and safety: a comparative study of factory-based workers and outworkers in the Australian clothing industry", International Journal of Health Services, vol. 29, no. 1, pp. 83-107, 1999. https://doi.org/10.2190/71L1-KRFN-P5QJ-XCNX
  17. C. Hope, "The impact of procurement and contracting practices on health and safety-a literature review", HSL report RAS/99/02, HSE Books, 1999.
  18. Health and Safety Commission, "Health and safety statistical highlights", Norwich: Health and Safety Executive, 2003.
  19. K. London, J. Chen, "Construction supply chain economic policy implementation for sectoral change: moving beyond the rhetoric", Proceedings of Annual Research Conference of the Royal Institution of Chartered Surveyors, University College London, The Royal Institution of Chartered Surveyors, pp. 1-10, 2006.
  20. R. Beach, M. Webster, K.M. Campbell, "An evaluation of partnership development in the construction industry", International Journal of Project Management, vol. 23, no. 8, pp. 611-621, 2005. https://doi.org/10.1016/j.ijproman.2005.04.001
  21. F.T. Edum-Fotwe, R. McCaffer, A. Thorpe, Z.M.A. Majid, "Sub-contracting or cocontracting: construction procurement in perspective", Proceedings of2nd International Conference on Construction Industry Development, National University of Singapore, Singapore, pp. 157-63, 1999.
  22. A.R.J. Dainty, G.H. Briscoe, S.J. Millett, "New perspectives on construction supply chain integration", Supply Chain Management, vol. 6, no. 4, pp. 163-173, 2001. https://doi.org/10.1108/13598540110402700
  23. A.S. Abd Shukor, M.F. Mohammad, R. Mahbub, F. Ismail, "Supply chain integration in industralised building system in the Malaysian construction industry", The Built & Human Environment Review, vol. 4, no. 1, pp. 108-121, 2011.
  24. R. Morledge, A.Knight, M. Grada, "The conceptand development of supply chain management in the UK construction industry", in Construction supply chain management concepts and case study, Eds. S. Pryke, UK: Wiley-Blackwell, 2009.
  25. R. Vrijhoef, H.A.J. Ridder, "Supply chain integration for achieving best value for construction clients: client-driven versus supplier-driven integration", Proceedings of Queensland University of Technology(QUT) Research WeekInternational Conference, Brisbane, Australia, 2005.
  26. V.M.R. Tummala, C.L.M. Philips, M. Johnson, "Assessing supply chain management success factors: a case study", Supply Chain Management: An International Journal, vo. 11, no. 2, pp. 179-192, 2006. https://doi.org/10.1108/13598540610652573
  27. D.M. Lambert, M.C. Cooper, "Issues in supply chain management", Industrial Marketing Management, vol. 29, no. 1, pp. 65-83, 2000. https://doi.org/10.1016/S0019-8501(99)00113-3
  28. S. Fernie, S. Thorpe, "Exploring change in construction: supply chain management", Constructions and Architectural Management, vol. 14, no. 4, pp. 319-333, 2007. https://doi.org/10.1108/09699980710760649
  29. K. London, J. Chen, "Supply chain sustainability: Report 1 literature review", CRC for Construction Innovation, Icon. Net Pty Ltd., 2005.
  30. EIM Business & Policy Research, Ikei Research and Consultancy, "EU SMEs and subcontracting", Final Report, The Commission of the European Communities, 2009.
  31. I.A. Diugwu, "A framework to evaluate critically the health and safety strategies in supply chains in the UK", Doctoral Dissertation, Coventry University, UK, 2008.
  32. P. Levy, S. Lemeshow, "Sampling of populations: methods and applications", New York: Wiley, 1991.
  33. M.J. Baker, "Sampling", Marketing Review, vol. 3, no. 1, pp. 103-120, 2002. https://doi.org/10.1362/146934702321477253
  34. Department of Trade and Industry, "Partnering and your business", Department of Trade and Industry, 2004.
  35. L. Glynn, "A critical appraisal tool for library and information research", Library Hi Tech, vol. 24, no. 3, pp. 387-399, 2006. https://doi.org/10.1108/07378830610692154
  36. Z. O'Leary, "The essential guide to doing research", London: SAGE Publications, 2004.
  37. D. Holt, C. Kockelbergh, "Environmental supply chain management in the UK-an exploratory analysis of current practices", Proceedings of 12th annual International Purchasing and Supply Education and Research Association (IPSERA) conference, Budapest, Hungary, pp. 678-89, 2003.
  38. J. Pallant, "SPSS survival manual: a step by step guide to data analysis using SPSS for Windows", Berkshire, UK: Open University Press, 2001.
  39. M. Fogliani, "Low response rates and their effects on survey results", November ed., Methodology Advisory Committee Paper. 1999.
  40. L. Vassie, J.M. Tomas, A. Oliver, "Health and safety management in UK and Spanish SMEs: a comparative study", Journal of Safety Research, vol. 31, no. 1, pp. 35-43, 2000. https://doi.org/10.1016/S0022-4375(99)00028-6
  41. J. Rimington, "Managing risk-adding value: how big firms managecontractual relations to reduce risk-a study", Great Britain: Health and Safety Executive, 1998.
  42. I. Dalling, "The future is unified: a model for integrated management", Quality World,. vol. 26, no. 4, pp. 34-39, 2000.
  43. R. Horvath, "Collaboration: the key to value chain creation in supply chain management", Supply Chain Management: An International Journal, vol. 8, no. 5, pp. 224-240, 2001.
  44. W.A. Tamarelli, "A revised discussion document in the report of the OECD workshop on small and medium-sized enterprises in relation to chemical accident chemical accident prevention, preparedness and response", Paris: Organisation for Economic Co-operation and Development (OECD), 1995.
  45. D.R. Walters, "Employee representation and health and safety: a strategy for improving health and safety performance in small enterprises?", Employee Relations, vol. 20, pp.180-195, 1998. https://doi.org/10.1108/01425459810211331
  46. D. Elliott, D. Patton, C. Lenaghan, "UK business and environmental strategy: a survey and analysis of East Midland firms' approaches to environmental audit", Greener Management International, vol. Jan, no. 13, pp. 30-49, 1996.
  47. Y. Duan, R. Mullins, D. Hamblin, S. Stanek, H. Sroka, V. Machado, J. Araujo, "Addressing ICTs skill challenges in SMEs: insights from three country investigations", Journal of European Industrial Training, vol. 26, no. 9, pp. 430-441, 2002. https://doi.org/10.1108/03090590210451524
  48. C. Egbu, K. Botterill, "Information Technologies For Knowledge Management: Their Usage And Effectiveness", Journal of Information Technology in Construction, vol. 7, special issue, ICT for Knowledge Management in Construction, pp. 125-137, 2002.
  49. R. Batenburg, R. Rutten, "Managing innovation in regional supply networks: a Dutch case of "knowledge industry clustering", Supply Chain Management: An International Journal, vol. 8, no. 3, pp. 263-270, 2003. https://doi.org/10.1108/13598540310484654
  50. T. Redman, E. Snape, A. Wilkinson, "Is quality management working in the UK?", Journal of General Management, vol. 20, no. 3, pp. 44-59, 1995. https://doi.org/10.1177/030630709502000304
  51. N. Gunningham, D. Sinclair, "Environmental partnerships; combining sustainability and commercial advantage in the agriculture sector (02/004 ACL-1A)", Australia: Rural Industries Research and Development Corporation, 2002.
  52. J.J. Smallwood, "Client influence on contractor health and safety in South Africa", Building Research and Information, vol. 26, no. 3, pp. 181-189, 1998. https://doi.org/10.1080/096132198369959
  53. S. Lippmann, "Environmental Responsibility: Are corporation buying it? A look at corporate green purchasing", Trillium Asset Management Quarterly Newsletter, 2002.
  54. J. Aitken, "Supply chain integration within the context of a supplier association", Cranfield, UK: Cranfield University, 1998.
  55. P. Hines, N. Rich, "Outsourcing competitive advantage: the useof supplier associations", International Journal of Physical Distribution and Logistics Management, vol. 28, no. 7, pp. 524-546, 1998. https://doi.org/10.1108/09600039810247489
  56. S. Chen, Y. Duan, J.S. Edwards, B. Lehaney, "Toward understanding inter-organizational knowledge transfer needs inSMEs: insight from a UK investigation", Journal of Knowledge Management, vol. 10, no. 3, pp. 6-23, 2006.
  57. A. Norman, U. Jansson, "Ericsson's proactive supply chain risk management approach after a serious sub-supplier accident", International Journal of Physical Distribution and Logistics Management, vol. 34, no. 5, pp. 434-456, 2004. https://doi.org/10.1108/09600030410545463
  58. F. Zani, M. Riva, "Safety management systems in major accident hazards companies: development criteria and performance evaluation tools", Proceedings of SEVESO European conference on risk management in the European Union of 2000: the challenge of implementing Council Directive 96/82, Eds. G. Papadakis, Athens: Joint Research Centre, European Commission, 1999.
  59. F.J. Long, M.B. Arnold, "The power of environmental partnerships", US: Dryden Press, 1994.
  60. A. Fearne, "The evolution of partnerships in the meat supply chain: insights from the British beef industry", International Journal of Supply Chain Management, vol. 3, no. 4, pp. 214-231, 1998. https://doi.org/10.1108/13598549810244296
  61. V.H.Y. Lo, A.H.W. Yeung, "Practical framework for strategic alliance in Pearl River Delta manufacturing supply chain: a total quality approach", International Journal of Production Economics, vol. 87, no. 3, pp. 231-240, 2004. https://doi.org/10.1016/S0925-5273(03)00217-2
  62. P. Taylor, "Employment initiatives for an ageing workforce in the EU-15", Luxembourg: Office for Official Publications of the European Communities, 2006.
  63. C. Gallagher, E. Underhill, M. Rimmer, "Occupational health and safety management systems: a review of their effectiveness in securing healthy and safe workplaces", National Occupational Health and Safety Commission, Commonwealth of Australia, 2001.
  64. D. Boddy, D. Macbeth, B. Wagner, "Implementing collaboration between organizations: an empirical study of supply chain partnering", Journal of Management Studies, vol. 37, no. 7, pp. 1003-1017, 2000. https://doi.org/10.1111/1467-6486.00214
  65. Organisation for Economic Co-operation and Development, "ENV/JM/MONO(99)12: Report of the OECD workshop on human performance in chemical process safety: operating safetyin the context of chemical accident prevention, preparedness and response", OECD Environmental Health and Safety Publications, Series on Chemical Accidents, No 4: Environment Directorate, OECD, 1999.
  66. J. Hooper, P. Longworth, "Health needs assessment workbook", Health Development Agency, 2002.
  67. T. Scott, R. Mannion, H. Davies, M. Marshall, "The quantitative measurement of organizational culture in health care: A review of the available instruments", Health Services Research, vol. 38, no. 3, pp. 923-945, 2003. https://doi.org/10.1111/1475-6773.00154
  68. J.T. Mentzer, S. Min, Z.G. Zacharia, "The nature of interfirm partnering in supply chain management", Journal of Retailing, vol. 76, no. 4, pp. 549-568, 2000. https://doi.org/10.1016/S0022-4359(00)00040-3
  69. European Agency for Safety and Health at Work, "Successful management to prevent accidents", Factsheets, European Agency for Safety and Health at Work, 2001.
  70. A. Norrman, U. Jansson, "Ericsson's proactive supply chain risk management approach after a serious sub-supplier accident", International Journal of Physical Distribution & Logistics Management, vol. 34, no. 5, pp. 434-456, 2004. https://doi.org/10.1108/09600030410545463
  71. J. Mohr, R.E. Spekman, "Characteristics of partnership success: partnership attributes, communication behavior, and conflict resolution techniques", Strategic Management Journal, vol. 15, no. 2, pp. 135-152, 1994. https://doi.org/10.1002/smj.4250150205
  72. G. Gereffi, "International trade and industrial upgrading in the apparel commodity chain", Journal of International Economics, vol. 48, no. 1, pp. 37-70, 1995.
  73. B.L. Kirkman, B. Rosen, "A model of work team empowerment", in Research in organizational change and development, Eds. R.W. Woodman, W.A. Pasmore, Greenwich, CT: JAI Press, pp. 131-167, 1997.
  74. R.C. Liden, S.J. Wayne, R.T. Sparrowe, "An examination of the mediating role of psychological empowerment on the relations between the job, interpersonal relationships, and work outcomes", Journal of Applied Psychology, vol. 85, no. 3, pp. 407-416, 2000. https://doi.org/10.1037/0021-9010.85.3.407
  75. R. Klassen, S. Vachon, "Collaboration and evaluation in the supply chain: the impact on plant-level environmental investment", Production and Operations Management, vol. 12, no. 3, pp. 336-352, 2003.
  76. R. McIvor, M. McHugh, "Partnership sourcing: an organisation change management perspective", The Journal of Supply Chain Management, vol. 36, no. 2, pp. 12-20, 2000. https://doi.org/10.1111/j.1745-493X.2000.tb00247.x
  77. P.S. Ring, A.H. Van de Ven, "Developmental processes of cooperative interorganizational relationships", Academy of Management Review, vol. 19, no. pp. 90-118, 1994.
  78. F. Nickols, "The accountability scorecard: a stakeholder-based approach to "keeping score"", Distance Consulting, 2000.
  79. A.P. King, M.C. Pitt, "Supply Chain Management: A Main Contractor's Perspective", in Construction Supply Chain Management Concepts and Case Studies, Eds. S. Pryke, Oxford, UK.: Wiley-Blackwell, 2009.
  80. M. Quinlan, P. Bohle, "Managing occupational health and safety in Australia", Melbourne: Macmillan, 1991.
  81. Partnership Sourcing Ltd., "The first partnership sourcing lecture", Wednesday, November 25th, 1998.
  82. M. Aquilon, "Cultural dimensions in logistics management: a case study from the European automotive industry", Supply Chain Management: An International Journal, vol. 2, no. 2, pp. 76-87, 1997. https://doi.org/10.1108/13598549710166122
  83. British Standards Institution, "BS 8800: 2004: Occupational health and safety management systems-Guide", London: British Standards Institution, 2004.