콘크리트학회논문집 (Journal of the Korea Concrete Institute)

  • 제26권1호
  • /
  • Pages.23-34
  • /
  • 2014
  • /
  • 1229-5515(pISSN)
  • /
  • 2234-2842(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

상온 양생한 초고성능 콘크리트(UHPC)의 경화 전과 후의 성능 관계

Performance of Fresh and Hardened Ultra High Performance Concrete without Heat Treatment

  • Kang, Sung-Hoon (Dept. of Architecture & Architectural Engineering, Seoul National University) ;
  • Hong, Sung-Gul (Dept. of Architecture & Architectural Engineering, Seoul National University)
  • 투고 : 2013.05.23
  • 심사 : 2013.10.24
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

초고성능 콘크리트(UHPC)를 현장에서 타설 하기 위해서는 타설 장비, 배근 상태, 타설 환경 등 현장 조건을 고려한 유동성 조절이 필요하다. 구성 재료와 배합비가 최적화된 UHPC 제품에서 유동성 조절을 위해 현실적으로 변경 가능한 방법은 물-결합재 비(W/B) 또는 고성능 감수제 혼입률(SP/C)을 조절하는 것이며, 경제적 이유로 강섬유 혼입률도 변경 할 수 있다. 일반 콘크리트와는 달리 UHPC는 아주 작은 재료와 배합비 변화에도 굳기 전 또는 굳은 성능에 많은 차이를 나타낸다. 따라서 이 연구에서는 이러한 요인들이 UHPC의 슬럼프 플로와 공기량에 미치는 영향, 그리고 인장 및 압축 성능에 미치는 영향을 알아보았으며, 슬럼프 플로와 공기량과의 선형적인 상관관계를 이용하여 이러한 성능들을 예측할 수 있는 식을 유도 하였다. UHPC의 특성 중 하나인 자기 충전성을 만족하는 조건에서 압축강도에 관한 최적 W/B와 SP/C는 각각 16.8%와 3%로 결정 되었으며, 이러한 조건에서 측정된 공기량은 3.2~4.2%로 이 범위에서의 공기량은 압축강도에 영향을 미치지 못하는 것으로 나타났다. 휨 인장강도에 있어 W/B와 SP/C는 무시할 만큼 작은 영향을 미쳤으며, 상온 양생한 UHPC의 경우 섬유 혼입률이 휨 인장성능을 지배 하는 것으로 평가 되었다. 다만, 체적비로 1%의 강섬유가 혼입된 시편의 경우 섬유가 혼입되지 않은 시편과 달리 균열 후 연성적인 거동은 보였으나, 강도 증진에는 효과가 없는 것으로 나타났다. 반면, 체적비 2%의 강섬유가 혼입된 시편은 강도와 연성을 크게 증가시켰다.

This study investigates the relationship between the performance of fresh and hardened Ultra-High Performance Concrete (UHPC) without heat treatment. The performance of fresh UHPC is determined by the slump flow test related to the fluidity of concrete mixtures, and the air content test. The variables of these tests are the water to binder ratio, superplasticizer dosages and volume fractions of steel fiber. Generally, insufficient fluidity and excessive air contents in concrete mixtures lead to the insufficient packing density related to the performance of harden concrete. The performance of hardened UHPC is determined by the compressive and flexural tensile tests. The results of the fresh UHPC tests show that there is the linear correlation between each variable and the slump flow diameter, and that the slump flow diameter is linearly decreased as the air content ratio increase. Using these results, the formula is developed to predict the fresh performance before mixing UHPC. The results of the hardened UHPC tests show that the hardened performance is not influenced by the air content ratio in the range of 3.2 to 4.2 per cent. However, the flexural tensile strength dominantly influenced by the volume fractions of steel fiber.

키워드

참고문헌

  1. Acker, P. and Behloul, M., "Ductal Technology: a Large Spectrum of Properties, a Wide Range of Applications," Proceedings of International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2004, pp. 11-23.
  2. Aarup, B., "CRC-Structural Applications of Ultra High Performance Fibre Reinforced Concrete," Proceedings of Second International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2008, pp. 831-838.
  3. Koh, K. T., Park, J. J., Ryu, G. S., and Kand, S. T., "Effect of the Compressive Strength of Ultra-High Strength Steel Fiber Reinforced Cementitious Composites on Curing Method," Journal of the Korean Society of Civil Engineers, Vol. 27, No. 3, 2007, pp.427-432.
  4. Bruhwiler, E. and Denarie, E., "Rehabilitation of Concrete Structures Using Ultra-High Performance Fibre Reinforced Concrete," Proceedings of Second International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2008, pp. 895-902.
  5. Scheffler, B. and Schmidt, M., "Application of Ultra-High Performance Concrete for Multifunctional Road Pavements," Proceedings of 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, University of Kassel, Germany, 2012, pp. 913-920.
  6. Perry, V. H. and Seibert, P. J., "The Use of UHPFRC (Ductal) for Bridges in North America: The Technology, Applications and Challenges Facing Commercialization," Proceedings of Second International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2008, pp. 815-822.
  7. Buzzini, D., Quasi-Static Cyclic Tests on Three Hybrid Fibre Concrete Structural Walls, Institute of Structural Engineering, Swiss Federal Institute of Technology, Zurich, Swiss, 2006, 186 pp.
  8. Park, J. S., Kim, B. S., Kim, Y. J., Choi, E. S., and Lee, C. H., "Compressive Strength of K-UHPC according to Mixing and Curing Method," Proceedings of the Korea Concrete Institute, Vol. 23, No. 2, 2011, pp. 201-202.
  9. Richard, P. and Cheyrezy, M., "Composition of Reactive Powder Concretes," Cement and Concrete Research, Vol. 25, No. 7, 1995, pp. 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
  10. Sugano, S., "Application of High-Strength and High-Performance Concrete in Seismic Regions," 8th HSC/HPC Symposium, Tokyo, 2008, pp. 1-8.
  11. Lee, D. H. and Kim, T. S., "Concrete Admixture-Superplasticizer," Magazine of the Korea Concrete Institute, Vol. 8, No. 2, 1996, pp. 20-31.
  12. Ingo, S., Jurgen, S., and Oliver, M., "Effect of Mixing and Placement Methods on Fresh and Hardened Ultra High Performance Concrete (UHPC)," Proceedings of International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2004, pp. 575-586.
  13. Tue, N. V., Ma, J., and Orgass, M., "Influence of Addition Method of Superplasticizer on the Properties of Fresh UHPC," Proceedings of Second International Symposium on Ultra High Performance Concrete, University of Kassel, Germany, 2008, pp. 93-100.
  14. Shihada, S. and Arafa, M., "Effects of Silica Fume, Ultrafine and Mixing Sequences on Properties of Ultra High Performance Concrete," Asian Journal of Materials Science, Vol. 2, No. 3, 2010, pp. 137-146. https://doi.org/10.3923/ajmskr.2010.137.146
  15. Kang, S. H. and Hong, S. G., "Influence of Packing Density and Mixing Method on Properties of Reactive Powder Concrete," Proceedings of the Korea Concrete Institute, Vol. 24, No. 1, 2012, pp. 707-708.
  16. Wille, K., Naaman, A. E., and Parra-Montesinos, G. J., "Ultra-High Performance Concrete with Compressive Strength Exceeding 150 MPa (22 ksi): A Simper Way," ACI Materials Journal, Vol. 108, No. 1, 2001, pp. 46-54.
  17. Bache, H. H., "Densified Cement/Ultra-Fine Particle-Based Materials," The Second International Conference on Superplasticizers in Concrete, Canada 1981, pp. 1-35.
  18. De Larrard, F. and Sedran, T., "Optimization of Ultra-High-Performance Concrete By The Use of a Packing Model," Cement and Concrete Research, Vol. 24, No. 6, 1994, pp. 997-1009. https://doi.org/10.1016/0008-8846(94)90022-1
  19. Kang, S. T., "Comparison of Flexural Tensile Strength according to the Presence of Notch and Fiber Content in Ultra High Performance Cementitious Composites," Journal of the Korea Concrete Institute, Vol. 24, No. 5, 2012, pp. 525-533. https://doi.org/10.4334/JKCI.2012.24.5.525
  20. Kang, S. T. and Ryu, G. S., "The Effect of Steel-Fiber Contents on the Compressive Stress-Strain Relation of Ultra High Performance Cementitious Composites (UHPCC)," Journal of the Korea Concrete Institute, Vol. 23, No. 1, 2011, pp. 67-75. https://doi.org/10.4334/JKCI.2011.23.1.067
  21. SAMARIS 2005, Report D22, Full Scale Application of UHPFRC for the Rehabilitation of Bridge-from the Lab to the Field, European Project 5th FWP/SAMARIS -Sustainable and Advanced MAterials for Road Infra Structures-WP 14: HPFRCC, Lausanne, Swiss, 2005, 63 pp.
  22. Parant, E., Mecanismes D'endommagement et Comportements Mecaniques d'un Composite Cimentaire Fibre Multi-Echelles sous Sollicitations Severes: Fatigue, Choc, Corros (in French), Doctoral thesis, Laboratoire Central des Ponst et Chaussees, France, 2003, 245 pp.
  23. Kang, S. T., Park, J. J., Ryu, G. S, and Kim S. W., "Influence of the Filler's Particle Size on the Mechanical Properties of Ultra High Performance Concrete(UHPC)," Journal of the Korean Society of Civil Engineers, Vol. 28, No. 4, 2008, pp. 573-580.
  24. Kang, S. H. and Hong, S. G., "Relationships between Performance of Fresh and Harden UHPC Cured at Room Temperature," Proceedings of the Korea Concrete Institute, Vol. 24, No. 2, 2012, pp. 431-432.
  25. BIBM, CEMBUREAU, ERMCO, EFCA, and EFNARC, The European Guidelines for Self-Compacting Concrete: Specification, Production and Use, The Self-Compacting Concrete European Project Group, 2005, 63 pp.
  26. Korean Agency for Technology and Standards, Ready-Mixed Concrete (KS F 4009), Korean Standards Association, 2011, 48 pp.
  27. Ahlborn, T. M., Peuse, E. J., and Misson D. L., Ultra-High-Performance-Concrete for Michigan Bridges Material Performance-Phase I, Center for Structural Durability, Michigan Technology University, 2008, 181 pp.
  28. AFGC/SETRA Working Group, Ultra High Performance Fibre-Reinforced Concrete, 2002, 152 pp.

피인용 문헌

  1. Effect of Internal Curing by Super-Absorbent Polymer (SAP) on Hydration, Autogenous Shrinkage, Durability and Mechanical Characteristics of Ultra-High Performance Concrete (UHPC) vol.28, pp.3, 2016, https://doi.org/10.4334/JKCI.2016.28.3.317
  2. Impact Resistance of UHPC Exterior Panels under High Velocity Impact Load vol.28, pp.4, 2016, https://doi.org/10.4334/JKCI.2016.28.4.455