Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Assessment for Fatigue Strength of EH Steels at Fillet Welded Joints using 1mm Stress Method

1mm 응력 기법을 적용한 EH 강재 필릿 용접 이음부 피로 강도 평가

  • Xin, Wen-Jie (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Oh, Dong-Jin (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Kim, Young-Nam (Design Division, STX Offshore & Shipbuilding Co.,LTD) ;
  • Kim, Myung-Hyun (Department of Naval Architecture and Ocean Engineering, Pusan National University)
  • 신문걸 (부산대학교 조선해양공학과) ;
  • 오동진 (부산대학교 조선해양공학과) ;
  • 김영남 (STX 조선해양 조선설계본부) ;
  • 김명현 (부산대학교 조선해양공학과)
  • Received : 2013.05.31
  • Accepted : 2014.01.02
  • Published : 2014.02.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.

Keywords

References

  1. Dong, P., 2001. A Structural Stress Definition and Numerical Implementation for fatigue Evaluation of Welded Joints. International Journal of Fatigue, 23(10), pp.865-876. https://doi.org/10.1016/S0142-1123(01)00055-X
  2. Hobbacher, A., 2007. Recommendations for Fatigue Design of Welded Joints and Components. IIW document XIII-2151-07/XV-1254-07. WRC bulletin 520, New York: The welding Research Council.
  3. Japanese society of steel construction (JSSC), 1995. Fatigue Design Recommendations for Steel Structures. JSSC Technical report No. 32. Tokyo: JSSC.
  4. Radaj, D. & Sonsino, C.M., 1998. Fatigue Assessment of Welded Joints by Local Approaches. Abington Publishing: Cambridge.
  5. Xiao, Z.G. & Yamada, K., 2004. A Method of Determining Geometric Stress for Fatigue Strength Evaluation of Steel Welded Joints. International Journal of Fatigue, 26(12), pp.1277-93. https://doi.org/10.1016/j.ijfatigue.2004.05.001
  6. Xiao, Z.G, Chen, T. & Zhao, X.L., 2012. Fatigue Strength Evaluation of Transverse Fillet Welded Joints Subjected to Bending Loads. International Journal of Fatigue, 38, pp.57-64. https://doi.org/10.1016/j.ijfatigue.2011.11.013
  7. Yagi, J. Machida, S. Tomita, Y. Matoba, M. & Soya, S., 1993. Thickness Effect Criterion for Fatigue Strength Evaluation of Welded Steel Structures. Journal of offshore Mechanics and Arctic Engineering, 115, pp.58-65. https://doi.org/10.1115/1.2920090
  8. Yagi, J. Machida, S. Tomita, Y. Matoba, M. & Soya, S., 1991. Influencing Factors on Thickness Effect of Fatigue Strength in As-Welded Joints for Steel Structures Strength Evaluation of Welded Steel Structures. Journal of the Society of Naval Architects of Japan, 169, pp.289-299.