대한화학회지 (Journal of the Korean Chemical Society)

  • 제58권1호
  • /
  • Pages.39-43
  • /
  • 2014
  • /
  • 1017-2548(pISSN)
  • /
  • 2234-8530(eISSN)
대한화학회 (Korean Chemical Society)
권호 표지
DOI QR코드

DOI QR Code

A Direct Transformation of Aryl Aldehydes to Benzyl Iodides Via Reductive Iodination

  • 투고 : 2013.03.13
  • 심사 : 2013.12.17
  • 발행 : 2014.02.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A facile transformation of aryl aldehydes to benzyl iodides through one-pot reductive iodination is reported. This protocol displays remarkable functional group tolerance and the title compound was obtained in good to excellent yield.

키워드

INTRODUCTION

Benzyl iodides are important subunit in organic synthesis. They are found to have broad applications in fields of fine chemicals, pharmaceuticals, medicinal chemistry and drug discovery.1−4 Although they possess numerous synthetic utilities, it has been primarily used to form carbon− carbon and carbon−heteroatom bonds. Unlike other halides, benzyl iodides are prepared freshly before use due to their low stability. Evidently, many synthetic protocols have been developed for the synthesis of benzyl iodides, however, most of the methods describe their preparation from the corresponding alcohol.5 Moreover, the projected benzyl iodide synthesis from aryl aldehyde involves two steps, proceeds via the intermediacy of benzyl alcohol. Conversely, it can be obtained in a single step by employing reductive iodination.6 Despite of its importance, this protocol has been less explored and thus found limited exploitation in synthesis.

Over the past few decades, organosilanes are emerged as popular reagents in synthetic chemistry.7 In the past, chlorotriethylsilane, dichloromethylsilane and polymethylhydrosiloxane were used for the reductive iodination, however, they had limited substrate scope.6a−d Also, few of these methods suffer from tedious work up procedures, harsh conditions and long reaction time. Triethylsilane (Et3SiH) is another versatile and commercially available reagent utilized for many transformations, for example, the reduction of carbonyl derivative.8 Consequently, we planned to develop one-pot strategy to access benzyl iodide from aryl aldehyde using triethylsilane. Herein, we disclose a facile and convenient reductive iodination of aryl aldehydes using Et3SiH and trifluoromethanesulfonic acid (TfOH) in presence of sodium iodide.

 

EXPERIMENTAL

All reagents were purchased from commercial suppliers and were used without purification. Melting points were determined in Buchi B-545 melting point apparatus and were uncorrected. 1H NMR and 13C NMR spectra were recorded on a Bruker Advance and Varian 400 ＆ 300 NMR MHz spectrometers in DMSO-d6 ＆ CDCl3 solution using TMS as an internal reference and 13C NMR spectra were recorded on 100 ＆ 75 MHz. Mass spectra were recorded on GC-MS using 230−400 mesh silica gel.

Typical Experimental Procedure for the Preparation of Benzyl Iodides

To an ice-cold solution of 4-bromo benzaldehyde 1a (0.18 g, 1 mmol) in CH3CN/DME (5 mL, 8:2) was added NaI (0.30 g, 2 mmol) and trifluoromethanesulphonic acid (0.09 mL, 1 mmol). Triethysilane (0.30 mL, 2 mmol) was slowly added to the mixture and allowed to stir at room temperature for 1 h. The reaction was monitored by GC. The reaction was quenched with 10% NaHCO3 solution (10 mL) on completion and the reaction mass was diluted with DCM (50 mL). The organic layer was separated, dried over anhydrous Na2SO4, evaporated and the crude mass was purified by silica gel flash column chromatography (2% ethyl acetate in petroleum ether) to give 4-bromo benzyl iodide 2a (266 mg, 90%).

To an ice-cold solution of 4-bromo benzaldehyde 1a (0.18 g, 1 mmol) in CH3CN/DME (5 mL, 8:2) was added NaI (0.30 g, 2 mmol) and trifluoromethanesulphonic acid (0.09 mL, 1 mmol). Triethysilane (0.30 mL, 2 mmol) was slowly added to the mixture and allowed to stir at room temperature for 1 h. The reaction was monitored by GC. The reaction was quenched with 10% NaHCO3 solution (10 mL) on completion and the reaction mass was diluted with DCM (50 mL). The organic layer was separated, dried over anhydrous Na2SO4, evaporated and the crude mass was purified by silica gel flash column chromatography (2% ethyl acetate in petroleum ether) to give 4-bromo benzyl iodide 2a (266 mg, 90%).

1-Bromo-4-(iodomethyl)benzene 2a

White solid; m.p. 71−73 ℃; 1H NMR (400 MHz, CDCl3) δ7.42 (d, J = 7.9 Hz, 2H), 7.25 (d, J = 7.8, 2H), 4.40 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 138.3, 131.9, 130.3, 121.6, 4.3. GCMS: 296.

1-Bromo-2-(iodomethyl)benzene 2b

White solid; m.p. 58−60 ℃; 1H NMR (300 MHz, CDCl3) δ 7.55−7.52 (m, 1H), 7.46−7.43 (m, 1H), 7.29−7.23 (m, 1H), 7.15−7.10 (m, 1H), 4.5 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 138.3, 133.4, 130.5, 129.5, 127.9, 124.0, 5.6; GCMS: 296.

1-Bromo-3-(iodomethyl)benzene 2c

Pale yellow solid; m.p. 50−53 ℃; 1H NMR (300 MHz, CDCl3) δ 7.53 (t, J = 1.7 Hz, 1H), 7.39−7.36 (m, 1H), 7.29 (t, J = 7.9 Hz, 1H), 7.17 (t, J = 7.8 Hz, 1H), 4.39 (s, 2H); 13C NMR (100 MHz, CDCl3) δ 141.4, 1331.6, 130.9, 130.2, 127.3, 122.4, 3.6; GCMS: 296.

1-Chloro-4-(iodomethyl)benzene 2d

Pale yellow solid; m.p. 62−64 ℃; 1H NMR (400 MHz, CDCl3) δ 7.33 (d, J = 2.2 Hz, 2H), 7.28 (d, J = 2.2 Hz, 2H), 4.44 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 137.8, 133.5, 130.0, 128.9, 4.1; GCMS: 252.

1-Fluoro-2-(iodomethyl)benzene 2e

Yellow liquid; 1H NMR (300 MHz, CDCl3) δ 7.39−7.36 (m, 1H), 7.34−7.23 (m, 1H), 7.11−6.99 (m, 2H), 4.45 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 160.3, 130.7, 129.8, 126.4, 124.4, 115.8, −3.5; GCMS: 236.

2-Chloro-4-fluoro-1-(iodomethyl)benzene 2f

White solid; m.p. 50−52 ℃; 1H NMR (400 MHz, CDCl3) δ 7.41−7.38 (m, 1H), 7.12−7.09 (m, 1H), 6.96−6.92 (m, 1H), 4.49 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 161.9, 134.5, 132.8, 131.5, 117.4, 114.6, 1.2; GCMS: 270.

1-Bromo-2-fluoro-3-(iodomethyl)benzene 2g

White solid; m.p. 54−56 ℃; 1H NMR (400 MHz, CDCl3) δ 7.27−7.21 (m, 3H), 4.38 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 159.9, 131.6, 127.8, 125.9, 122.2, 119.5, −4.8; GCMS: 314.

4-Bromo-2-(iodomethyl)-1-methoxybenzene 2h

Off-white solid; m.p. 55−58 ℃; 1H NMR (400 MHz, CDCl3) δ 7.42 (d, J = 2.4 Hz, 1H), 7.34 (dd, J = 8.72, 2.4 Hz, 1H), 6.72−6.70 (d, J = 8.72 Hz, 1H), 4.40 (s, 2H), 3.89 (s, 3H); 13C NMR (100 MHz, CDCl3) δ 156.2, 132.6, 132.1, 129.6, 112.7, 112.5, 55.8, −0.7; GCMS: 326.

1-Bromo-3-chloro-2-(iodomethyl)benzene 2i

Off-white solid; m.p. 75−78 ℃; 1H NMR (400 MHz, CDCl3) δ 7.47 (d, J = 8.04 Hz, 1H), 7.33 (d, J = 8.04 Hz, 1H), 7.07 (t, J = 8.04 Hz, 1H), 4.71 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 136.0, 134.9, 131.9, 129.6, 129.2, 125.1, 125.1, 3.2; GCMS: 331.

1,3-Dichloro-2-(iodomethyl)benzene 2j

White solid; m.p. 63−65 ℃; 1H NMR (300 MHz, CDCl3) δ 7.30 (d, J = 7.8 Hz, 2H), 7.15 (t, J = 7.8 Hz, 1H), 4.67 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 135.1, 134.7, 129.2, 128.5, −0.6; GCMS: 286.

1-(Iodomethyl)-4-isopropylbenzene 2k

Brown liquid; 1H NMR (400 MHz, CDCl3) δ 7.32 (d, J = 6.7 Hz, 2H), 7.16 (d, J = 6.7 Hz, 2H), 4.47 (s, 2H), 2.92− 2.85 (m, 1H), 1.24 (d, J = 6.9 Hz, 6H); 13C NMR (100 MHz, CDCl3) δ 148.7, 136.5, 128.7, 126.9, 33.8, 23.8, 6.1; GCMS: 260.

2-Iodo-1-(iodomethyl)-4-methoxybenzene 2l

Pale yellow solid; m.p. 58−61 ℃; 1H NMR (400 MHz, CDCl3) δ 7.41 (d, J = 2.2 Hz, 1H), 7.25 (dd, J = 8.4, 2.2 Hz, 1H), 6.85 (d, J = 8.4 Hz, 1H), 4.42 (s, 2H), 3.90 (s, 3H); 13C NMR (100 MHz, CDCl3) δ 154.6, 132.3, 130.5, 128.2, 122.4, 112.1, 56.2, 6.2; GCMS: 373.

Benzyl 4-(iodomethyl)phenyl ether 2m

White solid; m.p. 79−80 ℃; 1H NMR (400 MHz, CDCl3) δ 7.46−7.30 (m, 7H), 6.93−6.89 (m, 2H), 5.06 (s, 2H), 4.48 (s, 2H); 13C NMR (100 MHz, CDCl3) δ 158.4, 136.7, 131.6, 130.0, 128.6, 128.0, 127.4, 115.1, 70.0, 6.5; GCMS: 324.

4-(Iodomethyl)benzoic acid 2n

Off-white solid; m.p. 82−85 ℃; 1H NMR (400 MHz, DMSO-d6) δ 12.98 (br s, 1H), 7.85 (d, J = 8.2 Hz, 2H), 7.51 (d, J = 8.2 Hz, 2H), 4.65 (s, 2H); 13C NMR (100 MHz, DMSO-d6) δ 166.9, 144.9, 129.9, 129.7, 129.2, 129.1, 5.9; LCMS: 263 (M+1).

Methyl 4-(iodomethyl)benzoate 2o

White solid; m.p. 76−78 ℃; 1H NMR (400 MHz, CDCl3) δ 7.96 (d, J = 8.2 Hz, 2H), 7.43 (d, J = 8.2 Hz, 2H), 4.46 (s, 2H), 3.91 (s, 3H); 13C NMR (100 MHz, CDCl3) δ 166.4, 144.3, 130.0, 129.5, 128.7, 128.6, 52.1, 3.8; GCMS: 276.

1-[3-(Iodomethyl)phenyl]ethanone 2p

Off-white solid; m.p. 70−72 ℃; 1H NMR (400 MHz, CDCl3) δ 7.96 (d, J = 1.5 Hz, 1H), 7.85−82 (dd, J = 7.7, 1.5 Hz, 1H), 7.59 (d, J = 7.7 Hz, 1H), 7.42 (t, J = 7.7 Hz, 1H), 4.49 (s, 2H), 2.62 (s, 3H); 13C NMR (75 MHz, CDCl3) δ 197.4, 139.9, 137.5, 133.2, 129.1, 128.2, 127.7, 26.6, 4.0; GCMS: 260.

4-(Iodomethyl)benzonitrile 2q

Yellow solid; m.p. 143−146 ℃; 1H NMR (300 MHz, CDCl3) δ 7.59 (d, J = 8.3 Hz, 2H), 7.47 (d, J = 8.3 Hz, 2H), 4.44 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 144.6, 132.5, 129.3, 118.3, 111.5, 2.7; GCMS: 243.

3-(Iodomethyl)benzonitrile 2r

Pale yellow solid; m.p. 115−117 ℃; 1H NMR (400 MHz, CDCl3) δ 7.66 (s, 1H), 7.61 (d, J = 7.0 Hz, 1H), 7.54−7.53 (d, J = 7.0 Hz, 1H), 7.44−7.42 (d, J = 7.0 Hz, 1H), 4.42 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 140.8, 133.0, 132.0, 131.2, 129.6, 118.2, 112.8, 2.5; GCMS: 243.

1-(Iodomethyl)-3-nitrobenzene 2s

Yellow solid; m.p. 84−85 ℃; 1H NMR (400 MHz, CDCl3) δ 8.25 (t, J = 1.9 Hz, 1H), 8.13−8.11 (m, 1H), 7.71 (d, J = 7.9, 1.2 Hz, 1H), 7.50 (t, J = 7.9 Hz, 1H), 4.51 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 148.3, 141.3, 134.6, 129.81, 123.4, 122.6, 2.06; GCMS: 263.

1-(Allyloxy)-2-(iodomethyl)benzene 2t

Pale yellow liquid; 1H NMR (300 MHz, CDCl3) δ 7.33− 7.16 (m, 2H), 6.91−6.81 (m, 2H), 6.18−6.07 (m, 1H), 5.42 (d, J = 17.2 Hz, 1H), 5.32 (d, J = 10.5 Hz, 1H), 4.65 (d, J = 4.7 Hz, 2H), 4.53 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 156.1, 133.0, 130.1, 129.4, 127.6, 120.7, 117.2, 112.1, 68.6, 1.2; GCMS: 274.

1-(Allyloxy)-4-(iodomethyl)benzene 2u

Yellow liquid; 1H NMR (300 MHz, CDCl3) δ 7.33−7.27 (m, 2H), 6.87−6.83 (m, 2H), 6.08−6.05 (m, 1H), 5.44 (d, J = 16.8 Hz, 1H), 5.29 (d, J = 10.0 Hz, 1H), 4.65 (d, J = 4.8 Hz, 2H), 4.54 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 158.1, 135.6, 133.4, 129.9, 117.7, 115.0, 68.7, 5.5; GCMS: 274.

[(1-E)-3-Iodopro-1-en-1-yl]benzene 2v

Pale yellow solid; m.p. 58−60 ℃; 1H NMR (300 MHz, CDCl3) δ 7.40−7.23 (m, 5H), 6.62 (d, J = 15.6 Hz, 1H), 6.50− 6.40 (m, 1H), 4.14 (d, J = 7.9 Hz, 2H); 13C NMR (75 MHz, CDCl3) δ 135.8, 133.0, 128.5, 128.1, 126.8, 126.5, 6.7; GCMS: 244.

1-Ethynyl-4-(iodomethyl)benzene 2w

Pale yellow solid; m.p. 52−53 ℃; 1H NMR (300 MHz, CDCl3) δ 7.42 (d, J = 8.2 Hz, 2H), 7.33 (d, J = 8.2 Hz, 2H), 4.44 (s, 2H), 3.10 (s, J = 1H); 13C NMR (75 MHz, CDCl3) δ 139.9, 132.4, 128.6, 121.6, 83.1, 77.8, 4.5; GCMS: 242.

1-(Iodomethyl)-4-(phenylethynyl)benzene 2x

Pale yellow solid; m.p. 54−56 ℃; 1H NMR (300 MHz, CDCl3) δ 7.66−7.62 (m, 2H), 7.53−7.50 (m, 1H), 7.46−7.39 (m, 5H), 7.37−7.25 (m, 1H), 4.71 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 140.5, 132.5, 131.5, 128.9, 128.7, 128.5, 128.4, 128.1, 127.9, 125.6, 123.1, 122.7, 95.8, 86.6, 4.4; GCMS: 318.

 

RESULTS AND DISCUSSION

To execute this task, p-bromobenzaldehyde 1a, a model substrate shown in Scheme 1, was stirred with Et3SiH, TfOH and NaI as an iodide source in acetonitrile at room temperature for 2 h furnished 2a in 75% yield (Table 1). To further optimize conditions, the reaction was conducted by changing the solvents, Brønsted acids and reaction time.

Scheme 1.Reductive iodination of p-bromobenzaldehyde.

Table 1.aReactions were performed on p-bromobenzaldehyde (1 mmol) in CH3CN (5 mL) with 2 equiv. of triethylsilane (Et3SiH), 1 2 equiv. of acid, 2 equiv. of NaI. bIsolated yield. DME: 1,2-dimethoxyethane.

Solvents such as DME and toluene did not improve the yield and formation of the desired product was not observed when the reaction was carried out in THF, DMF and DCM (entry 2−6). Similar results were obtained when the reaction was conducted in the presence of various protic acids. Surprisingly, using the mixture of acetonitrile/DME (8:2) with TfOH resulted in complete consumption of 1a in 1 h and delivered 2a in high yield (90%) (Table 1).9ab Additionally, nBu4NI and nMe4NI were used as iodide source instead of sodium iodide under the optimized condition (entry 10) showed complete decomposition.

In order to explore the application of this protocol, we employed the optimized conditions on benzaldehydes bearing various functional groups. Bromo, chloro, fluoro substituted benzaldehydes 1b−1j underwent smooth reductive iodination to deliver the corresponding benzyl iodides 2b−2j in high yield (Table 2). Similarly, alkyl and alkoxy substituted benzaldehydes gave the desired products 2k−2m. Carbonyl derivatives such as acid and ester group bearing benzaldehydes led to the corresponding benzyl iodides 2n−2o in high yield. The desired benzyl iodide 2p was obtained in high yield without affecting the keto functionality. Nitro and cyano substituted benzaldehydes also delivered the desired products 2q−2s as shown in the Table 2.

To further demonstrate the efficiency of this protocol, allyl substituted benzaldehydes were converted into corresponding the benzyl iodide derivatives 2t−2u. Cinnamaldehyde led to the iodo derivative 2v wherein the double bond is preserved. Triple bonds also remained unaffected when terminal and internal alkyne substituted benzaldehydes were subjected to the reductive iodination to afford 2w−2x (Table 2). However, aliphatic aldehydes fail to undergo reductive iodination.

A tentative mechanism has been shown in Scheme 2 for the reductive iodination. At first, the aldehyde 1 gets protonated to form a protonated aldehyde A which undergoes reduction under Et3SiH to generate B. Nucleophilic displacement on B with iodide gives benzyl iodide 2.

Table 2.aIsolated yields.

Scheme 2.Tentative mechanism for reductive iodination.

 

CONCLUSION

In conclusion, we have developed a simple and efficient protocol for the preparation of benzyl iodides from aryl aldehydes in a single step through a reductive iodination protocol. This transformation was performed under ambient condition using a combination Et3SiH, CF3SO3H and NaI. Also, it exhibits broad functional group tolerance.

참고문헌

  1. (a) Reinhard, R.; Schmidt, B. F. J. Org. Chem. 1998, 63, 2434-2441. https://doi.org/10.1021/jo961861m
  2. (b) Smith, T. H.; Fujiwara, A. N.; Henry, D. W. J. Med. Chem. 1979, 22, 40. https://doi.org/10.1021/jm00187a010
  3. Loksha, Y. M.; El-Badawi, M. A.; El-Barbary, A. A.; Pedersen, E. B.; Nielsen, C. Arch. Pharm. 2003, 336, 175. https://doi.org/10.1002/ardp.200390017
  4. Andrus, M. B.; Hicken, E. J.; Stephens, J. C.; Bedke, D. K. J. Org. Chem. 2005, 70, 9470. https://doi.org/10.1021/jo051568z
  5. DeGraw, J. I.; Colwell, W. T.; Crase, J.; Smith, R. L.; Piper, J. R.; Waud, W. R.; Sirotnak, F. M. J. Med. Chem. 1997, 40,370. https://doi.org/10.1021/jm9505526
  6. (a) Vankar, Y. D.; Rao, C. T. Tetrahedron Lett. 1985, 26, 2717. https://doi.org/10.1016/S0040-4039(00)98145-0
  7. (b) Haynes, R. K.; Holden, M. Aust. J. Chem. 1982, 35,517. https://doi.org/10.1071/CH9820517
  8. (c) Di Deo, M.; Marcantoni, E.; Torregiani, E.; Bartoli, G.; Bellucci, M. C.; Bosco, M.; Sambri, L. J. Org. Chem. 2000, 65, 2830. https://doi.org/10.1021/jo991894c
  9. (d) Joseph, R.; Pallan, P.; Sudalai, A.; Ravindranathan, T. Tetrahedron Lett. 1995, 36, 609. https://doi.org/10.1016/0040-4039(94)02315-3
  10. (e) Tajbakhsh, M.; Hosseinzadeh, R.; Lasemi, Z. Synlett 2004, 635.
  11. (f) Iranpoor, N.; Firouzabadi, H.; Aghapour, A.; Vaezzadeh, A. R. Tetrahedron 2002, 58, 8689. https://doi.org/10.1016/S0040-4020(02)01089-X
  12. (g) Firouzabadi, H.; Iranpoor, N.; Jafarpour, M. Tetrahedron Lett. 2004, 45, 7451. https://doi.org/10.1016/j.tetlet.2004.08.056
  13. (h) Falck, J. R.; Manna, S. Synth. Commun. 1985, 15, 663. https://doi.org/10.1080/00397918508063855
  14. (i) Bhor, M. D.; Panda, A. G.; Nandurkar, N. S.; Bhanage, B. M. Tetrahedron Lett. 2008, 49, 6475. https://doi.org/10.1016/j.tetlet.2008.09.002
  15. (a) Aizpurua, J. M.; Lecea, B.; Palomo, C. Tetrahedron Lett. 1984, 25, 1103. https://doi.org/10.1016/S0040-4039(01)80113-1
  16. (b) Aizpurua, J. M.; Lecea, B.; Palomo, C. Can. J. Chem. 1986, 64, 2342. https://doi.org/10.1139/v86-386
  17. (c) Li, Z.; Sheng, C.; Yang, C.; Qiu, H. Org. Prep. Proc. Int. 2007, 39, 608. https://doi.org/10.1080/00304940709458645
  18. (d) Keinan, E.; Perez, D.; Sahai, M.; Shvily, R. J. Org. Chem. 1990, 55, 2927. https://doi.org/10.1021/jo00296a068
  19. (e) Lecea, B.; Azipurua, J. M.; Palomo, C. Tetrahedron 1985, 41, 4657. https://doi.org/10.1016/S0040-4020(01)82361-9
  20. (f) Das, B.; Srinivas, Y.; Holla, H.; Laxminarayana, K.; Narender, R. Tetrahedron Lett. 2007, 48, 6681. https://doi.org/10.1016/j.tetlet.2007.07.125
  21. (a) Michael, P. D.; Donald, J. D.; Stephen, J. D.; Dale, A. K.; Abayomi, A. O.; Charles, T. W.; Steven, M. Z. J. Org. Chem. 1974, 39, 2740. https://doi.org/10.1021/jo00932a015
  22. (b) Evans, D. V.; Fitch, D. M.; Smith, T. E.; Cee, V. J. J. Am. Chem. Soc. 2000, 122, 10033. https://doi.org/10.1021/ja002356g
  23. (c) Lam, H. W.; Joensuu, P. M. A. Org. Lett. 2005, 7, 4225. https://doi.org/10.1021/ol051649h
  24. (a) Chang, Y. H.; Pinnick, H. W. J. Org. Chem. 1978, 43, 374. https://doi.org/10.1021/jo00396a056
  25. (b) Aghayan, M. M.; Boukherroub, R.; Rahimifard, M. J. Organomet. Chem. 2008, 693, 3567. https://doi.org/10.1016/j.jorganchem.2008.09.005

피인용 문헌

  1. One-Pot Preparation of Alkyl Iodides from Esters by Indium-Catalyzed Reductive Cleavage of a Carbon-Oxygen Bond vol.2015, pp.7, 2015, https://doi.org/10.1002/ejoc.201403539