DOI QR코드

DOI QR Code

유압 인버터 엘리베이터를 위한 부하 보상 및 속도 제어기

Load compensation and Speed Controller for Hydraulic Inverter-fed Elevator

  • Han, Sang-Soo (Department of Energy and Information Technology, Gachon University)
  • 투고 : 2013.09.17
  • 발행 : 2014.02.25

초록

유압 인버터 엘리베이터의 비선형성과 유압 펌프의 누유량으로 인한 진동 및 속도 편차를 줄이기 위한 부하 보상 및 속도 제어기를 제안하였다. 부하보상 제어기는 PI제어기로 구성하였으며 속도제어기는 PID 제어기를 이용하여 구성하였다. 제어기 제어 변수 이득은 시스템 전달함수의 주파수 응답 방법을 이용하였다. 제안한 제어기의 효용성은 실험을 통해 입증하였고 실험 결과 제안한 제어기는 부하 변동에 강인하고 비선형인 유압 엘리베이터 시스템에 안정하고 좋은 속도 및 가속도 응답 특성을 갖는다.

To prove the vibration and speed error problems caused by the nonlinear friction characteristics and load variation of the hydraulic system, a PID speed controller and a load compensation controller for the hydraulic inverter-fed elevator are proposed. The load compensation controller is composed by the PI controller and the speed controller is composed by the PID controller. The P,I and D gains of the control parameters are obtained by the frequency response of system transfer function. The Effectiveness of the proposed controller are shown by experimental results, which the proposed controller yields robustness with load variations and stable and good speed and acceleration responses with less oscillations.

키워드

참고문헌

  1. E. Sasaki, T. Matsudo, I. Nakamura and K. Hida, "Hydraulic elevator to answer the needs of smooth and energy saving," The Hitachi Hyoron, Vol. 75, No. 7, 1993.
  2. K. Hatano and H. Kobayashi, "Advanced_control hydraulic elevator," Japan Machinery Institute, Anthology of Lecture of Dynamics, No.910-3, pp. 59-62, 1991.
  3. M. Iwasaki, Y. Kitoh, N. Matsui, "Disturbance Observer-based Nonlinear Friction Compensation In Servo Drive system," T. IEE Japan, vol.117-D, no.4, pp.456-462, 1997.
  4. J. W. Choi and S. C. Lee, "Antiwindup Strategy for PI-Type Speed Controller," IEEE Trans. Ind. Electrtron., vol.56, pp.2039-2046, 2009. https://doi.org/10.1109/TIE.2009.2016514
  5. F. Padula and A. Visioli, "On the Stabilizing PID Controllers for Integral Processes," IEEE Trans. Autom. Control, vol.57, no.2, pp.494-499, 2012. https://doi.org/10.1109/TAC.2011.2164821