DOI QR코드

DOI QR Code

Numerical and analytical study of aeroelastic characteristics of wind turbine composite blades

  • 투고 : 2013.03.17
  • 심사 : 2013.08.22
  • 발행 : 2014.02.25

초록

Aeroelasticity is the main source of instability in structures which are subjected to aerodynamic forces. One of the major reasons of instability is the coupling of bending and torsional vibration of the flexible bodies, which is known as flutter. The presented investigation aims to study the aeroelastic stability of composite blades of wind turbine. Geometry, layup, and loading of the turbine blades made of laminated composites were calculated and evaluated. To study the flutter phenomenon of the blades, two numerical and analytical methods were selected. The finite element method (FEM), and JAR-23 standard were used to perform the numerical studies. In the analytical method, two degree freedom flutter and Lagrange's equations were employed to study the flutter phenomena analytically and estimate the flutter speed.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan

참고문헌

  1. ANSYS Help System, Analysis guide theory refrence, Version 12.
  2. Baumgart, A. (2002), "A mathematical model for wind turbine blades", J. Sound Vib.,251(1), 1-12. https://doi.org/10.1006/jsvi.2001.3806
  3. Baxevanou, C.A., Chaviaropoulos, P.K., Voutsinas, S.G. and Vlachos, N.S. (2008), "Evaluation study of a Navier-Stokes CFD aeroelastic model of wind turbine airfoils in classical flutter", J. Wind Eng. Ind. Aerod., 96(8), 1425-1443. https://doi.org/10.1016/j.jweia.2008.03.009
  4. Eggleston, D.M. and Stoddard, F.S. (1987), Wind turbine engineering design, Springer.
  5. Fazelzadeh, S.A., Mazidi, A. and Kalantari, H. (2009), "Bending-torsional flutter of wings with an attached mass subjected to a follower force", J. Sound Vib., 323(1), 148-162. https://doi.org/10.1016/j.jsv.2009.01.002
  6. Fung, Y.C. (2002), An introduction to the theory of aeroelasticity, Courier Dover Publications, New York.
  7. Ghasemi, A.R. (2000), Structural design of composite blades of wind turbine, M. Sc. Thesis, University of Science and Technology, Tehran, Iran.
  8. Guo, S. (2007), "Aeroelastic optimization of an aerobatic aircraft wing structure", Aerospace Sci. Technol., 11(5), 396-404. https://doi.org/10.1016/j.ast.2007.01.003
  9. Hodges, D.H. and Pierce, G.A. (2002), Introduction to structural dynamics and aeroelasticity, Cambridge University Press.
  10. JAR-23 (1994), Joint Aviation Requirements, Normal, utility, aerobatic and commuter category aeroplanes.
  11. Jureczko, M.E.Z.Y.K., Pawlak, M. and Mezyk, A. (2005), "Optimisation of wind turbine blades", J. Mater. Process. Tech., 167(2), 463-471. https://doi.org/10.1016/j.jmatprotec.2005.06.055
  12. Larsen, J.W. and Nielsen, S.R. (2007), "Nonlinear parametric instability of wind turbine wings", J. Sound Vib., 299(1), 64-82. https://doi.org/10.1016/j.jsv.2006.06.055
  13. Lee, J.W., Lee, J.S., Han, J.H. and Shin, H.K. (2012), "Aeroelastic analysis of wind turbine blades based on modified strip theory", J. Wind Eng. Ind. Aerod., 110, 62-69. https://doi.org/10.1016/j.jweia.2012.07.007
  14. Lee, J.W., Kim, J.K., Han J.H. and Shin H.K. "Active load control for wind turbine blades using trailing edge flap", Wind Struct., 16(3), 249-261. https://doi.org/10.12989/was.2013.16.3.249
  15. Petrini, F., Li, H. and Bontempi, F. (2010), "Basis of design and numerical modeling of offshore wind turbines", Struct. Eng. Mech.,36(5),599-624. https://doi.org/10.12989/sem.2010.36.5.599
  16. Shokrieh, M.M. and Taheri-berooz, F. (2001),"Wing instability of a full composite aircraft", J. Compos. Struct.,54(2), 335-340. https://doi.org/10.1016/S0263-8223(01)00107-6
  17. Tenguria, N., Mittal N.D. and Ahmed, S. (2013), "Structural analysis of horizontal axis wind turbine blade", Wind Struct., 16(3), 241-248. https://doi.org/10.12989/was.2013.16.3.241
  18. Tsai, S.W. (1988), Composites design, (4th Ed.), Dayton, OH: Think Composites.

피인용 문헌

  1. Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads vol.9, pp.9, 2017, https://doi.org/10.1177/1687814017724088
  2. Measurement and analysis of wind turbine blade mechanical load vol.7, pp.1, 2015, https://doi.org/10.1063/1.4905466
  3. Deep neural network-based wind speed forecasting and fatigue analysis of a large composite wind turbine blade pp.2041-2983, 2018, https://doi.org/10.1177/0954406218797972
  4. Towards a digital twin realization of the blade system design study wind turbine blade vol.28, pp.5, 2014, https://doi.org/10.12989/was.2019.28.5.271
  5. Enhancing aerodynamic performance of NACA 4412 aircraft wing using leading edge modification vol.29, pp.4, 2019, https://doi.org/10.12989/was.2019.29.4.271
  6. Flutter study of flapwise bend-twist coupled composite wind turbine blades vol.32, pp.3, 2021, https://doi.org/10.12989/was.2021.32.3.267
  7. Multi-objective structural optimization of a wind turbine blade using NSGA-II algorithm and FSI vol.93, pp.6, 2014, https://doi.org/10.1108/aeat-02-2021-0055