DOI QR코드

DOI QR Code

다구찌 방법에 의한 PAC 실내기 유로의 최적설계

Optimum Design of an Indoor Package Air-Conditioner's Flow Path by Taguchi Method

  • 김장권 (군산대학교 동력기계시스템공학과) ;
  • 오석형 (군산대학교 기계공학부)
  • Kim, Jang-Kweon (Department of Power System Engineering, Kunsan National University) ;
  • Oh, Seok-Hyung (School of Mechanical Engineering, Kunsan National University)
  • 투고 : 2013.06.14
  • 심사 : 2013.09.26
  • 발행 : 2014.02.28

초록

In this study, the optimum design process of an indoor package air-conditioner (PAC) was implemented by Taguchi method. The goal of this study is to obtain the best set condition of each control factor composing of an indoor PAC. The number of revolution of a double inlet sirocco fan installed in an indoor PAC was measured by the orthogonal array of $L_{18}(2^3{\times}3^4)$ and analysed by using the-smaller- the-better characteristic among the static characteristic analyses. As a result, the optimum condition of an indoor PAC was found as a set of when the cost of production, assembling and working conditions were considered. Moreover, the number of revolution of a double-inlet sirocco fan used for an optimum condition was reduced about 8.5% more than that of a standard condition for the target flowrate of $18.5m^3/min$.

키워드

참고문헌

  1. J. K. Kim, 1995, "Study on the Development for Low Noise Package Air-Conditioner", Trans. of the KSME, Vol. 19, No. 10, pp. 2710-2719.
  2. J. K. Kim, 1996, "Study on the Development for Low Noise Indoor and Outdoor Package Air-Conditioner", Trans. of the KSME (Part A), Vol. 20, No. 6, pp. 1913-1920.
  3. J. K. Kim, 1999, "An Experimental Study on the Optimum Design of Sirocco Fan by Using Taguchi Method", Trans. of the KSME (Part B), Vol. 23, No. 6, pp. 761-768.
  4. J. K. Kim and S. H. Oh, 2013, "Experimental Study on the Aerodynamic Performance of Double Inlet Sirocco Fan for a Package Air Conditioner", Journal of the KSPSE, Vol. 17, No. 1, pp. 52-57.
  5. J. K. Kim and S. H. Oh, 2013, "Optimum Design of an Indoor Package Air Conditioner's Flow Path for the Installation of a Double-Inlet Sirocco Fan", Proceeding of the KSPSE, Spring Annual Meeting, June 13-14, pp. 29-32.
  6. ANOVA-TM Users Manual, 1993, American Supplier Institute.
  7. Case Studies & Tutorials, 1993, 11th Annual Taguchi Symposium, Nov. 2-4, Costa Mesa, California, American Supplier Institute.
  8. M. S. Phadke, 1989, "Quality Engineering Using Robust Design", AT&T Bell Laboratories.
  9. W. Y. Fowlkes and C. M. Creveling, 1995, "Engineering Methods for Robust Product Design", Addition-Wesley Publishing Company.