DOI QR코드

DOI QR Code

Seismic assessment and retrofitting of existing structure based on nonlinear static analysis

  • Ni, Pengpeng (ROSE Programme, UME (Understanding and Managing Extremes) Graduate School, IUSS Pavia (Institute for Advanced Study, Pavia))
  • 투고 : 2012.05.26
  • 심사 : 2014.01.31
  • 발행 : 2014.03.10

초록

Seismic assessment and retrofitting of existing structure is a complicated work that typically requires more sophisticated analyses than performing a new design. Before the implementation of a Code for seismic design of buildings (GBJ 11-89), not enough attention has been paid on seismic performance of structures and a great part of the existing reinforced concrete structures built in China have been poorly designed according to the new version of the same code (GB 50011-2010). This paper presents a case study of seismic assessment of a non-seismically designed reinforced concrete building in China. The structural responses are evaluated using the nonlinear static procedure (the so-called pushover analysis), which requires its introduction within a process that allows the estimation of the demand, against which the capacity is then compared with. The capacity of all structural members can be determined following the design code. Based on the structural performance, suitable retrofitting strategies are selected and implemented to the existing system. The retrofitted structure is analyzed again to check the effectiveness of the rehabilitation. Different types of retrofitting strategy are discussed and classified according to their complexity and benefits. Finally, a proper intervention methodology is utilized to upgrade this typical low-rise non-ductile building.

키워드

참고문헌

  1. Akis, T. (2004), "Lateral load analysis of shear wall-frame structures", Ph.D. Dissertation, The Middle East Technical University, Ankara, Turkey.
  2. Applied Technology Council (ATC 40) (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Redwood City, California.
  3. Bayramoglu, G., Ozgen, A. and Altinok, E. (2014), "Seismic performance evaluation and retrofitting with viscous fluid dampers of an existing bridge in Istanbul", Struct. Eng. Mech., 49(4), 463-477. https://doi.org/10.12989/sem.2014.49.4.463
  4. Bergami, A.V. and Nuti, C. (2013), "A design procedure of dissipative braces for seismic upgrading structures", Earthq. Struct., 4(1), 85-108. https://doi.org/10.12989/eas.2013.4.1.085
  5. Butler, R., Stewart, G.S. and Kanamori, H. (1979), "The July 27, 1976 Tangshan, China earthquake-a complex sequence of intraplate events", Bull. Seismol. Soc. Am., 69(1), 207-220.
  6. Christopoulos, C. and Filiatrault, A. (2006), Principles of passive supplemental damping and seismic isolation, IUSS Press, Pavia, Italy.
  7. Ciampoli, M. and Pinto, P.E. (1995), "Effects of soil-structure interaction on inelastic seismic response of bridge piers", J. Struct. Eng., 121(5), 806-814. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(806)
  8. D'Aniello, M., Portioli, F. and Landolfo, R. (2010), "Modelling issues of steel braces under extreme cyclic actions", Proceedings of Urban Habitat Constructions under Catastrophic Events, Naples, Italy, September.
  9. Elenas, A. and Vasiliadis, L. (2002), "Retrofit of a stone masonry school building damaged during the Athens earthquake of 7 September 1999", Proceedings of 12th European Conference on Earthquake Engineering, London, September.
  10. Elenas, A., Vasiliadis, L. and Dimova, S. (2002), "Retrofit alternatives of a ten-storey r/c building damaged during the Athens earthquake of 7 September 1999", Proceedings of 12th European Conference on Earthquake Engineering, London, September.
  11. Federal Emergency Management Agency (FEMA356) (2000), Prestandard and Commentary for the Seismic Rehabilitation of the Building, Washington.
  12. fib (2003), Bulletin 24: Seismic assessment and retrofit of reinforced concrete buildings, Part5: Seismic Retrofitting Techniques.
  13. GB 50011-2010 (2010), Code for seismic design of buildings-Part 4: Site, subgrade and foundation and Part5: Earthquake action and structural seismic checking computations, National Standard of the People's Republic of China.
  14. GBJ 11-89 (1989), Code for seismic design of buildings-Part 1: General Principles, National Standard of the People's Republic of China.
  15. Ghobarah, A. and Abou-Elfath, H. (2001), "Rehabilitation of a reinforced concrete frame using eccentric steel bracing", Eng. Struct., 23(7), 745-755. https://doi.org/10.1016/S0141-0296(00)00100-0
  16. Griffith, M. (2008), Seismic retrofit of RC frame buildings with masonry infill walls: literature review and preliminary case study, JRC Scientific and Technical Reports, The Institute for the Protection and the Security of the Citizen, Ispra, Italy.
  17. Guneyisi, E.M. and Altay, G. (2005), "A study on the seismic behavior of a retrofitted building based on nonlinear static and dynamic analyses", Earthq. Eng. Eng. Vib., 4(1), 173-180. https://doi.org/10.1007/s11803-005-0035-6
  18. Kabir, M.Z. and Ghaednia, H. (2008), "Structural performance of retrofitting bridge deck slabs using CFRP strips under cyclic loading", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, October.
  19. Krawinkler, H. and Seneviratna, G.D.P.K. (1998), "Pros and cons of a pushover analysis of seismic performance evaluation", Eng. Struct., 20(4-6), 452-464. https://doi.org/10.1016/S0141-0296(97)00092-8
  20. Lima, C., Martinelli, E. and Faella, C. (2012a), "Capacity models for shear strength of exterior joints in RC frames: state-of-the-art and synoptic examination", Bull. Earthq. Eng., 10(3), 967-983. https://doi.org/10.1007/s10518-012-9340-4
  21. Lima, C., Martinelli, E. and Faella, C. (2012b), "Capacity models for shear strength of exterior joints in RC frames: experimental assessment and recalibration", Bull. Earthq. Eng., 10(3), 985-1007. https://doi.org/10.1007/s10518-012-9342-2
  22. Maheri, M.R. and Sahebi, A. (1997), "Use of steel bracing in reinforced concrete frames", Eng. Struct., 19(12), 1018-1024. https://doi.org/10.1016/S0141-0296(97)00041-2
  23. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  24. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending", Proceedings of Symposium on the Resistance and Ultimate Deformability of structures Acted on by Well Defined Repeats Loads, Zurich, Switzerland.
  25. Mylonakis, G. and Gazetas, G. (2000), "Seismic soil-structure interaction: beneficial or detrimental?", J. Earthq. Eng., 4(3), 277-301.
  26. Ni, P. (2012), "Non-linear dynamic soil-structure interaction for displacement-based seismic assessment of bridges", Master's Dissertation, European School for Advanced Studies in Reduction of Seismic Risk (ROSE School), Pavia, Italy.
  27. Ni, P. (2013a), "Effects of soil-structure interaction on direct displacement-based assessment procedure of multi-span reinforced concrete bridges", Eur. J. Environ. Civ. Eng., 17(7), 507-531. https://doi.org/10.1080/19648189.2013.771111
  28. Ni, P. (2013b), "Verification of applicability of macro-element implementation in a finite element code for shallow foundations", Int. J. Struct. Stab. Dyn., 13(8), 1350041, doi: 10.1142/S0219455413500417.
  29. Ni, P., Petrini, L. and Paolucci, R. (2014), "Direct displacement-based assessment with non-linear soilstructure interaction for multi-span reinforced concrete bridges", Struct. Infrastruct. Eng., doi: 10.1080/15732479.2013.802813.
  30. Panagiotakos, T.B. and Fardis, M.N. (2001), "A displacement-based seismic design procedure for RC building and comparison with Eurocode 8", Earthq. Eng. Struct. Dyn., 30(10), 1439-1462. https://doi.org/10.1002/eqe.71
  31. Paolucci, R. Figini, R. and Petrini, L. (2013), "Introducing dynamic non-linear soil-foundation-structure interaction effects in displacement-based seismic design", Earthq. Spectra, 29(2), 1-22. https://doi.org/10.1193/1.4000097
  32. Pinho, R. (2001), "Seismic assessment and upgrading of reinforced concrete buildings", Proceedings of 20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, September.
  33. Priestley, M.J.N. (1997), "Displacement-based seismic assessment of reinforced concrete buildings", J. Earthq. Eng., 1(1), 157-192.
  34. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Direct Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  35. Priestley, M.J.N., Grant, D.N. and Blandon, C.A. (2005), "Direct displacement-based seismic design", Proceedings of New Zealand Society for Earthquake Engineering Conference, Wairakei, New Zealand, March.
  36. Priestley, M.J.N. and Kowalsky, M.J. (2000), "Direct displacement-based seismic design of concrete buildings", Bull. N.Z. Soc. Eearthq. Eng., 33(4). 421-444.
  37. Sadan, O.B., Lorenza, P. and Calvi, G.M. (2013), "Direct displacement-based seismic assessment procedure for multi-span reinforced concrete bridges with single-column piers", Earthq. Eng. Struct. Dyn., 42(7), 1031-1051. https://doi.org/10.1002/eqe.2257
  38. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  39. Yilmaz, S., Tama Y.S. and Kaplan, H. (2010), "Design and construction of external precast shear walls for seismic retrofit", Proceedings of 14th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia.

피인용 문헌

  1. Predicting the seismic performance of typical R/C healthcare facilities: emphasis on hospitals vol.9, pp.3, 2017, https://doi.org/10.1007/s40091-017-0164-y
  2. Parametric study of pendulum type dynamic vibration absorber for controlling vibration of a two DOF structure vol.13, pp.1, 2014, https://doi.org/10.12989/eas.2017.13.1.051
  3. Comparison of the seismic performance of existing RC buildings designed to different codes vol.14, pp.6, 2018, https://doi.org/10.12989/eas.2018.14.6.505
  4. Seismic performance evaluation of steel frame structures equipped with tuned liquid dampers vol.19, pp.8, 2014, https://doi.org/10.1007/s42107-018-0082-8