DOI QR코드

DOI QR Code

이성분계 가연성 혼합물의 인화점 측정

The Flash Point Measurement for Binary Flammable Mixture

  • 하동명 (세명대학교 보건안전공학과) ;
  • 이성진 (세명대학교 임상병리학과)
  • Ha, Dong-Myeong (Dept. of Occupational Health and Safety Engineering, Semyung University) ;
  • Lee, Sungjin (Dept. of Clinical Laboratory Science, Semyung University)
  • 투고 : 2014.08.26
  • 심사 : 2014.10.28
  • 발행 : 2014.10.31

초록

가연성 액체 혼합물의 화재 위험성을 특징짓는 주된 물리적 성질은 인화점이다. 본 연구는 이성분계 가연성 혼합물의 인화점을 측정하고 예측하고자 한다. Seta flash 밀폐식 장치를 이용하여 n-propanol+propionic acid 계의 인화점을 측정하였다. van Laar 식과 NRTL 식을 이용한 최적화 기법을 통해 인화점을 예측하였다. 이 계산치와 라울의 법칙에 의한 계산치를 비교하였다. 그 결과, 최적화 기법에 의한 계산치가 라울의 법칙에 의한 계산치 보다 측정값에 보다 근사하였다.

The flash point is the major physical property used to characterize the fire hazard of flammable liquid solutions. In the present study, the main focus is on measuring and estimating the flash points for binary flammable mixture. The flash points for n-propanol+propionic acid were measured by Seta flash closed cup apparatus. The experimental data were correlated with the van Laar and NRTL equations through the optimization method. The results estimated by these correlations were compared with the values calculated by the method based on Raoult's law. The optimization method were found to be better than the method based on the Raoult's law.

키워드

참고문헌

  1. Catoire, L., Paulmier, S., and Naudet, V., "Experimental determination and estimation of closed cup flash points of mixtures of flammable solvents", Process Safety Progress, 25, 1, 33-39, (2006) https://doi.org/10.1002/prs.10112
  2. H.J. Liaw, W.H. Lu, V. Gerbaud and C.C. Cheng, "Flash-point prediction for binary partially miscible mixtures of flammable solvents", J. of Hazardous Materials, 153, 1165-1175, (2008) https://doi.org/10.1016/j.jhazmat.2007.09.078
  3. Khalili, T. and Moghadam, A.Z., "Measurement and calculation of flash point of binary aqueous-organic and organic-organic solutions", Fluid Phase Equilibria, 312, 101-105, (2011) https://doi.org/10.1016/j.fluid.2011.09.003
  4. Affens, W.A. and Mclaren, G.W., "Flammability Properties of Hydrocarbon Solutions in Air", J. of Chem. & Eng. Data, 17(4), 482-488, (1972) https://doi.org/10.1021/je60055a040
  5. White, D., Beyler, C.L., Fulper, C., and Leonard, J., "Flame spread on aviation fuels", Fire Safety Journal, 28, 1-31, (1997) https://doi.org/10.1016/S0379-7112(96)00070-7
  6. Gmehling, J. and Rasmussen, P., "Flash points of flammable liquid mixtures using UNIFAC", Ind. Eng. Chem. Fundam., 2, 186.-188, (1982)
  7. Liaw, H.J., Chen, C.T., Cheng, C.C., and Yang, Y.T., "A mathematical model for predicting the flash point of binary solution", J. of Loss Prevention in the Process Industries, 15, 429-438, (2002) https://doi.org/10.1016/S0950-4230(02)00068-2
  8. Poling, B.E., Prausnitz, J.M., and O'connell, J.P., The Properties of Gases and Liquids, 5th Edition., McGraw-Hill, New York, (2001)
  9. D.M. Ha and S.J. Lee, "Prediction and measurement of the lower flash points for flammable binary solutions by using a setaflash closed cup tester", Korean J. Chem. Eng., 28, 5, 1161-1165, (2011) https://doi.org/10.1007/s11814-010-0478-y
  10. American Society for Testing Materials, Annual Book of ASTM Standards, Vol. 06.01, (1999)
  11. Le Chatelier, "Esimation of Firedamp by Flammability limits", Ann. Minmes, 19, 388-392, (1891)
  12. Gmehing, J., Onken, U., and Arlt, W., Vapor-Liquid Equilibrium Data Collection, 1, Part1-Part7, DECHEMA, (1980)
  13. Liaw, H.J., Tang, C.L., and Lai, J.S., "A Model for Predicting the Flash Point of Ternary Flammable Solutions of Liquid", Combust Flame, 138, 308-319, (2004) https://doi.org/10.1016/j.combustflame.2004.06.002
  14. Kuester J.L. and J.H. Mize, Optimization Techniques with Fortran, McGraw-Hill, New York, (1973)
  15. S.J. Lee and D.M. Ha, "The Lower Flash Points of Binary Systems Containing Non-Flammable Component", Korean J. Chem. Eng., 20(5), 799-802, (2003) https://doi.org/10.1007/BF02697279
  16. J. Lim, S. Jang, H. Kim, H.K. Cho and M.S. Shin, "Solubility of triclocarban in pure alkanols at different temperatures", Korean J. Chem. Eng., 30, 1, 181-186, (2013) https://doi.org/10.1007/s11814-012-0099-8