References
- API RP 2A-WSD (2005), Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - WSD (Working Stress Design), American Petroleum Institute, Washington, DC.
- API RP 2GEO (2011), Recommended Practice for Geotechnical Foundation Design Consideration, American Petroleum Institute, Washington, DC.
-
Benmebarek, S., Remadna, M. S., Benmebarek, N., and Belounar, L. (2012), Numerical evaluation of the bearing capacity factor
$N_{\gamma}$ of ring footings, Computers and Geotechnics, Vol.44, June 2012, pp.132-138. https://doi.org/10.1016/j.compgeo.2012.04.004 - Bolton, M. D. (1986), The strength and dilatancy of sands, Geotechnique, Vol.36, Issue 1, March 1986, pp.65-78. https://doi.org/10.1680/geot.1986.36.1.65
- Bolton, M. D. and Lau, C. K. (1993), Vertical bearing capacity factors for circular and strip footings on Mohr-Coulomb soil, Canadian Geotechnical Journal, Vol.30, No.6, pp.1024-1033. https://doi.org/10.1139/t93-099
- Booker, J. R. (1970), Application of Theories of Plasticity to Cohesive Frictional Soils, Ph.D. Thesis, University of Sydney, Australia.
- Brinch Hansen, J. (1970), A Revised and Extended Formula for Bearing Capacity, Akademiet for de Tekniske Videnskaber, Geoteknisk Institut, Bulletin No.28, Copenhagen, pp.5-11.
- Caquot, A. and Kerisel, J. (1953), Sur le Terme de Surface dans le Calcul des Foundations en Milieu Pulverulent, Proc. 3rd Int. Conf. on Soil Mechanics and Foundation Engineering, Vol.I, Zurich, pp.336-337.
- De Beer, E. E. (1970), Experimental determination of the shape factors and the bearing capacity factors of sand, Geotechnique, Vol.20, No.4, pp.387-411. https://doi.org/10.1680/geot.1970.20.4.387
- De Borst, R. and Vermeer, P. A. (1984), Possibilities and limitations of finite elements for limit analysis, Geotechnique, Vol.34, No.2, pp.199-210. https://doi.org/10.1680/geot.1984.34.2.199
- Drescher, A. and Detournay, E. (1993), Limit load in translational failure mechanisms for associative and non-associative materials, Geotechnique, Vol.43, No.3, pp.443-456. https://doi.org/10.1680/geot.1993.43.3.443
- Drucker, D. C., Prager, W., and Greenberg, H. J. (1952), Extended limit design theorems for continuous media, Quart. Appl. Math, Vol.9, No.4, pp.381-389.
- Erickson, H. L. and Drescher, A. (2002), Bearing capacity of circular footings, Journal of Geotechnical and Geoenvironmental Engineering, Vol.128, No.1, pp.38-43. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:1(38)
- Eurocode 7 (2004), (EN 1997-1) Geotechnical Design, Part I: General Rules, Deutsches Institut fur Normung e.V., Berlin.
-
Frydman, S. and Burd, H. J. (1997), Numerical studies of bearingcapacity factor
$N_{\gamma}$ , Journal of Geotechnical and Geoenvironmental Engineering, Vol.123, No.1, pp.20-29. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:1(20) - Golder, H. Q., Fellenius, W., Kogler, F., Meischeider, H., Krey, H., and Prandtl, L. (1941), The ultimate bearing pressure of rectangular footings, Journal of the ICE, Vol.17, No.2, pp.161-174. https://doi.org/10.1680/ijoti.1941.13728
- Griffiths, D. V. (1982), Computation of bearing capacity factors using finite elements, Geotechnique, Vol.32, No.3, pp.195-202. https://doi.org/10.1680/geot.1982.32.3.195
- Hansen, B. (1979), Definition and use of frictional angles, Proc. Int. Conf. VII, ECSMFE Brighton, UK.
-
Hjiaj, M., Lyamin, A. V., and Sloan, S. W. (2005), Numerical limit analysis solutions for the bearing capacity factor
$N_{\gamma}$ , International Journal of Solids and Structures, Vol.42, No.5, pp.1681-1704. https://doi.org/10.1016/j.ijsolstr.2004.08.002 - Ibsen, L.B., Barari, A., and Larsen, K.A. (2012), Modified vertical bearing capacity for circular foundations in sand using reduced friction angle, Ocean Engineering, Vol.47, pp.1-6. https://doi.org/10.1016/j.oceaneng.2012.03.003
- ISO 19901-4 (2003), Petroleum and Natural Gas Industries - Specific Requirements for Offshore Structures, Part 4: Geotechnical and Foundation Design considerations, International Organization for Standardization, Switzerland.
- Itasca Consulting Group Inc. (2011), FLAC, Fast Lagrangian analysis of continua, Version 7, Minneapolis, USA.
- Kim, Y. M. and Kang, S. W. (2010), A Study on Comparison of Finite Element Analysis with Model Test of Shallow Footing Failure for Cohesionless Soil with Non-associated Plasticity and Some Smooth Footing, Journal of Korean Geosynthetics Society, Vol.9, No.1, pp.13-20.
- Krabbenhoft, K., Karim, M. R., Lyamin, A. V., and Sloan, S. W. (2012), Associated computational plasticity schemes for nonassociated frictional materials, International Journal for Numerical Methods in Engineering, Vol.90, No.9, pp.1089-1117. https://doi.org/10.1002/nme.3358
-
Kumar, J. (2003),
$N_{\gamma}$ for rough strip footing using the method of characteristics, Canadian Geotechnical Journal, Vol.40, No.3, pp.669-674. https://doi.org/10.1139/t03-009 - Lambe, T. W. and Whitman, R. V. (2008), Soil mechanics SI version, John Wiley and Sons.
- Lee, J. H. (2002), Comparison of Bearing Capacity Calculation Methods for Shallow Foundations, Master thesis, Hanyang University.
- Lee, Y. J. and Lee, J. M. (2010), Evaluation of Vertical stress on shallow footing based on Numerical Modelling, Korean Geotechnical Society Magazine, Vol.26, No.5, pp.48-49.
- Loukidis, D. and Salgado, R. (2009), Bearing capacity of strip and circular footings in sand using finite elements, Computers and Geotechnics, Vol.36, No.5, pp.871-879.
- Marti, J. and Cundall, P. (1982), Mixed discretization procedure for accurate modelling of plastic collapse, International Journal for Numerical and Analytical Methods in Geomechanics, Vol.6, No.1, pp.129-139. https://doi.org/10.1002/nag.1610060109
- Martin, C. M. (2004), ABC User Manual.
- Martin, C. M. (2005), Exact bearing capacity calculations using the method of characteristics, Proc. of th 11th IACMAG, Vol.4, Turin, pp.441-450.
- Meyerhof, G. G. (1951), The Ultimate Bearing Capacity of Foundations, Geotechnique, Vol.2, No.4, pp.301-332. https://doi.org/10.1680/geot.1951.2.4.301
- Meyerhof, G. G. (1963), Some recent research on the bearing capacity of foundations, Canadian Geotechnical Journal, Vol.1, No.1, pp.16-26. https://doi.org/10.1139/t63-003
- Meyerhof, G. G. (1974), Ultimate bearing capacity of footings on sand layer overlying clay, Canadian Geotechnical Journal, Vol.11, No.2, pp.223-229. https://doi.org/10.1139/t74-018
- Michalowski, R. L. (1997), An estimate of the influence of soil weight on bearing capacity using limit analysis, Soils and Foundations, Vol.37, No.4, pp.57-64. https://doi.org/10.3208/sandf.37.4_57
- NCHRP Report 651 (2010), LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures, Transportation Research Board, Washington, DC.
- PLAXIS bv (2007), PLAXIS 3D Foundation User Manual.
- Potts, D. M. and Zdravkovic, L. (2001), Finite element analysis in geotechnical engineering: applications. London, Thomas Telford Ltd.
- Prandtl, L. (1920), Ueber die Haerte plastischer Koerper, Nachrichten der Gesellschaft der Wissenschaften, Berichte der mathem.-physikal, Klasse, pp.74-85.
- Reissner, H. (1924), Zum Erddruckproblem, Proc. 1st Int. Congress of Applied Mechanics, Delft, pp.295-311.
- Salgado, R. (2008), The engineering of foundations, New York, McGraw Hill.
- Shield, R.T. (1954), Plastic potential theory and Prandtl bearing capacity solution, J. Appl. Mech., Vol.21, No.2, pp.193-194.
- Sokolovskii, V. V. (1965), Statics of Soil Media, Pergamon Press.
- Terzaghi, K. (1943), Theoretical Soil Mechanics, John wiley and Sons, New York.
- Vermeer, P. A. (1990), The orientation of shear bands in biaxial tests, Geotechnique, Vol.40, No.2, pp.223-236. https://doi.org/10.1680/geot.1990.40.2.223
- Vesic, A. (1973), Analysis of Ultimate Loads of Shallow Foundations, Journal of the Soil Mechanics and Foundations Division, Vol.99, No.1, pp.54-73.
- Vesic, A. (1975), Bearing Capacity of Shallow Foundations, In Foundation Engineering Handbook, H. F. Winterkorn and H. Y. Fang, eds., Van Nostrand Reinhold, New York, pp.121-147.
- Wood, D. M. (2004), Geotechnical Modelling, Taylor and Francis.
- Zhao, L. and Wang, J. H. (2009), Influence of nonassociativity on the bearing capacity factors of a circular footing, Journal of Shanghai Jiaotong University (Science), Vol.14, pp.429-434.
- Zhu, F., Clark, J. I., and Phillips, R. (2001), Scale effect of strip and circular footings resting on dense sand, Journal of Geotechnical and Geoenvironmental engineering, Vol.127, No.7, pp.613-621. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:7(613)
- Zhu, M. and Michalowski, R. L. (2005), Shape factors for limit loads on square and rectangular footings, Journal of Geotechnical and Geoenvironmental Engineering, Vol.131, No.2, pp.223-231. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(223)
Cited by
- 사질토 지반에 설치된 버킷기초의 수직 하중전이 특성 vol.31, pp.7, 2014, https://doi.org/10.7843/kgs.2015.31.7.29
- 사질토 지반에 설치된 버킷기초 및 얕은기초의 수직지지력 산정 vol.16, pp.9, 2014, https://doi.org/10.14481/jkges.2015.16.9.33
- 유한요소해석을 통한 다층지반에서의 버킷기초 수직지지력 산정 vol.32, pp.7, 2014, https://doi.org/10.7843/kgs.2016.32.7.35
- 복합하중을 고려한 국내 서남해 지반에서의 Spudcan 설계 vol.17, pp.10, 2014, https://doi.org/10.14481/jkges.2016.17.10.13
- 사질토 지반에 설치된 버킷기초의 강성 vol.18, pp.8, 2014, https://doi.org/10.14481/jkges.2017.18.8.5