DOI QR코드

DOI QR Code

Ambient vibration tests of XV century Renaissance Palace after 2012 Emilia earthquake in Northern Italy

  • Received : 2014.03.11
  • Accepted : 2014.06.02
  • Published : 2014.06.25

Abstract

This paper focuses on the dynamic behaviour of Mirandola City Hall (a XV century Renaissance Palace) that was severely damaged during May 2012 Emilia earthquake in Northern Italy. Experimental investigations have been carried out on this monumental building. Firstly, detailed investigations have been carried out to identify the identification of the geometry of the main constructional parts as well as the mechanical features of the constituting materials of the palace. Then, Ambient Vibration Tests (AVT) have been applied, for the detection of the main dynamic features. Three output-only identification methods have been compared: (i) the Frequency Domain Decomposition, (ii) the Random Decrement (RD) and the (iii) Eigensystem Realization Algorithm (ERA). The modal parameters of the Palace were difficult to be identified due to the severe structural damage; however the two bending modes in the perpendicular directions were identified. The comparison of the three experimental techniques showed a good agreement confirming the reliability of the three identification methods.

Keywords

References

  1. Abdel-Ghaffar, A.M. and Scanlan, R.H. (1985), "Ambient vibration studies of Golden Gate Bridge: II. pier-tower structure", J. Eng. Mech. - ASCE, 111(4), 483-499. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:4(483)
  2. Bendat, J.S. and Piersol, A.G. (2000), Random data: analysis and measurement procedures, Wiley, New York.
  3. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the International Modal Analysis Conference (IMAC), San Antonio, Texas.
  4. Caicedo, J.M., Dyke, S.J. and Johnson, A.E. (2004), "Natural excitation technique and eigensystem realization algorithm for phase i of the iasc-asce benchmark problem: simulated data", J. Eng. Mech. - ASCE, 130(1), 49-60. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:1(49)
  5. Chang, C.C., Chang, T.Y.P. and Zhang, Q.W. (2001), "Ambient vibration of long-span cable-stayed bridge", J. Bridge Eng., 6(1), 46-53. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(46)
  6. Cimellaro, G.P., Chiriatti, M., Reinhorn, A.M. and Tirca, L. (2012), Emilia Earthquake of May 20th, 2012 in Northern Italy: rebuilding a resilient community to multiple hazards, MCEER Technical Report -MCEER-12-0009, MCEER, State University of New York at Buffalo (SUNY), Buffalo, New York.
  7. Cimellaro, G.P., Pianta, S. and De Stefano, A. (2012), "Output-only modal identification of ancient L'Aquila City Hall and Civic Tower", J. Struct. Eng. - ASCE, 138(4), 481-491. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000494
  8. Cimellaro, G. P. and Reinhorn, A.M. (2011), "Multidimensional performance limit state for hazard fragility functions", J. Eng. Mech. - ASCE, 137(1), 47-60. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000201
  9. Cole, H.A. (1968), "On-the-line analysis of random vibrations", AIAA Paper, 68-288.
  10. James, G.H., Carne, T.G. and Lauffer, J.P. (1993), The natural excitation technique for modal parameter extraction from operating wind turbines, Sandia National Laboratories.
  11. James, G.H., Carne, T.G. and Mayes, R.L. (1996), "Modal parameter extraction from large operationg structures using ambient excitation", Proceedings of the 14th Int. Modal Analysis Conf., Dearborn, Michigan, USA.
  12. Juang, J.N., Cooper, J.E. and Wright, J.R. (1988), "An eigensystem realization algorithm using data correlations (ERA/DC) for modal parameter identification", Control Theory Adv. Technol., 4(1), 5-14.
  13. Juang, J.N. and Pappa, R.S. (1986), "Effect of noise on modal parameters identified by the eigensystem realization algorithm", J. Guid. Control Dynam., 9(3), 294-303. https://doi.org/10.2514/3.20106
  14. Juang, J.N. and Pappa, R.S. (1985), "An eigensystem realization algorithm for modal parameter identification and model reduction", J. Guid. Control Dynam., 8(5), 620-627. https://doi.org/10.2514/3.20031
  15. Nagayama, T., Abe, M., Fujino, Y. and Ikeda, K. (2005), "Structural identification of a nonproportionally damped system and its application to a full-scale suspension bridge", J. Struct. Eng. -ASCE, 131(10), 1536-1545. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1536)
  16. Pianta, S., Cimellaro, G.P. and De Stefano, A (2011), "Experimental and numerical modal identification of L'Aquila Margherita Palace", Proceedings of the SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2011), American University in Dubai (AUD), Dubai UAE, 8 -10 February.
  17. Saudi, G., Reynolds, P., Zaki, M. and Hodhod, H. (2009), "Finite-element model tuning of global modes of a grandstand structure using ambient vibration testing", J. Perform. Constr. Fac., 23(6), 467-479. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000049

Cited by

  1. Structural health monitoring of the retrofitting process, characterization and reliability analysis of a masonry heritage construction vol.7, pp.3, 2017, https://doi.org/10.1007/s13349-017-0232-9
  2. Case study on the effects of retrofitting on changing structural dynamic characteristics by microtremor measurements and finite element analysis vol.55, pp.5, 2015, https://doi.org/10.12989/sem.2015.55.5.965
  3. First Evaluation of the Structural Performance of Traditional Brickwork after Standard Fire Exposure vol.1119, pp.1662-8985, 2015, https://doi.org/10.4028/www.scientific.net/AMR.1119.706
  4. Structural Health Assessment of Historical Buildings via Ambient Vibrations: The SMAV Methodology for “Palazzo delle Laudi” at Sansepolcro (AR) vol.15, pp.4, 2014, https://doi.org/10.1080/15583058.2019.1636330