참고문헌
- J. S. Lim, "Flow assurance technology in petroleum production system," Journal of Petroleum, vol. 26, pp. 68-65, 2010.
- L. W. Lake, Petroleum Engineering Handbook vol. 1 : General Engineering, SPE, 2006.
- R. Bagatin, C. Busto, S. Correra, M. Margarone, and C. Carniani, "Wax modeling : There is need for alternatives," Proceedings of SPE Russian Oil and Gas Technical Conference and Exhibition (SPE 115184), 2008. Available: http://dx.doi.org/10.2118/115184-MS
- E. B. Hunt, "Laboratory study of paraffin deposition," Journal of Petroleum Technology, vol. 14, no. 11, pp. 1259-1269, 1962. https://doi.org/10.2118/279-PA
- C. C. Patton and B. M. Casad, "Paraffin deposition from refined wax-solvent systems," Journal of Society of Petroleum Engineers, vol. 10, no. 1, pp. 17-24, 1970. https://doi.org/10.2118/2503-PA
- J. L. Boyd and J. E. Freeman, "New ceramic-epoxy technology for oil and gas drilling and production," Journal of Corrosion 97 (NACE 97071), 1997.
- G. Aspenes, The influence of pipeline wettability and crude oil composition on deposition of gas hydrates during petroleum production, Ph.D. Dissertation, Bergen University, Norway, 2009.
- R. M. Jorda, "Paraffin deposition and prevention in oil wells," Journal of Petroleum Technology, vol. 18, no. 12, pp. 1605-1612, 1966. https://doi.org/10.2118/1598-PA
- K. Paso, T. Kompalla, N. Aske, H. P. Ronningsen, G. Oye, and J. Sjoblom, "Novel surfaces with applicability for preventing wax deposition : A review," Journal of Dispersion Science and Technology, vol. 30, no. 6, pp. 757-781, 2009. https://doi.org/10.1080/01932690802643220
- O. L. Owodunni and J. A. Ajienka, "Use of thermal insulation to prevent hydrate and paraffin wax deposition," Proceedings of Nigeria Annual International Conference and Exhibition (SPE 111903), 2007. Available: http://dx.doi.org/10.2118/111903-MS
- S. G. Johnsen, S. M. Hanetho, P. Tetlie, S. T. Johansen, M. A. Einarsrud, I. Kaus, and C. R. Simon, "Studies of paraffin wax deposition on coated and non-coated steel surfaces," Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, pp. 251-258, 2011.
- F. W. Jessen and J. N. Howell, "Effect of flow rate on paraffin accumulation in plastic, steel and coated pipe," Petroleum Transactions, vol. 213, pp. 80-84, 1958.
- T. Zhu, J. A. Walker, and J. Liang, Evaluation of Wax Deposition and Its Control during Production of Alaska North Slope Oils, Technical Report FC26-01NT41248, University of Alaska, U.S.A., 2008. Available: http://www.osti.gov/scitech/biblio/963363/
- S. Y. Back, P. S. Kang, S. R. Yu, H. S. Kim, J. H. Park, and J. S. Lim, "Wax appearance temperature measurement of opaque oil for flow assurance in subsea petroleum production system," Journal of Korean Society of Marine Engineering, vol. 36, no. 1, pp. 185-194, 2012. https://doi.org/10.5916/jkosme.2012.36.1.185
피인용 문헌
- Flow Rate Effect on Wax Deposition Behavior in Single-Phase Laminar Flow vol.141, pp.3, 2018, https://doi.org/10.1115/1.4041525