References
- K. J. Rawson and E. C. Tupper, Basic Ship Theory, Jordan Hill., Oxford, p. 731, 2001.
- H. A. Jackson, Submarine Design Notes, Massachusetts Institute of Technology, p. 520, 1982.
- M. Moonesun, Handbook of Naval Architecture Engineering, Kanoon Pajohesh., Isfahan, p. 1003, 2009.
- V. Lewis Edward, Principles of Naval Architecture (Second Revision), Volume II - Resistance, Propulsion and Vibration, The Society of Naval Architects and Marine Engineers, 1988.
- V. Bertram, Practical Ship Hydrodynamics, Elsevier Ltd., UK, p. 369, 2000.
- M. Moonesun, M. Javadi, P. Charmdooz, and U. M. Korol, "Evaluation of submarine model test in towing tank and comparison with CFD and experimental formulas for fully submerged resistance," Indian Journal of Geo-Marine Science, vol. 42, no. 8, pp. 1049-1056, 2013.
- C. K. Hah, L. Y. Lim, and J. S. Ki, "Hydrodynamic evaluation for developing the inflatable kayak," Journal of the Korean Society of Marine Engineering, vol. 37, no 6, pp. 623-630, 2013. https://doi.org/10.5916/jkosme.2013.37.6.623
- M. S. Kim and K. S. Lee, "Hydrodynamic force calculation and motion analysis of OC3 hywind floating offshore platform," Journal of the Korean Society of Marine Engineering, vol. 37, no. 8 pp. 953-961, 2013. https://doi.org/10.5916/jkosme.2013.37.8.953
- D. J. Yeo and K. P. Rhee, "A study on the sensitivity analysis of submersibles' manoeuvrability," Journal of the Society of Naval Architects of Korea, vol. 42, no. 5, pp. 458-465, 2005. https://doi.org/10.3744/SNAK.2005.42.5.458
- Y. K. Shin and S. K. Lee, "A study on the modeling of hydrodynamic coefficient for the emergency maneuver simulation of underwater vehicle," Journal of the Society of Naval Architects of Korea, vol. 42, no. 6, pp. 601-607, 2005. https://doi.org/10.3744/SNAK.2005.42.6.601
- D. J. Yeo, H. K. Yoon, Y. G. Kim, and C. M. Lee, "A research on the mathematical modeling for the estimation of underwater vehicle's tail plane efficiency," Journal of the Society of Naval Architects of Korea, vol. 42, no. 3, pp. 190-196, 2005. https://doi.org/10.3744/SNAK.2005.42.3.190
- V. Bertram, Practical Ship Hydrodynamics, Butterworth-Heinemann Linacre House, Oxford OX2 8DP, p. 65, 2000.
- A. F. Molland, S. R. Turnock, and D. A. Hudson, "Ship resistance and propulsion", Cambridge University Press, p. 14, 2011.
- S. F. Hoerner, Fluid Dynamic Drag, USA, 1965.
- Iranian Defense Standard (IDS-857), Hydrodynamics of Medium Size Submarines, 2011.
- M. Moonesun, "Introduction of Iranian hydrodynamic series of submarines (IHSS)," Journal of Taiwan Society of Naval Architects and Marine Engineers, vol. 33, no. 3, pp. 155-162, 2014.
- M. Moonesun and P. Charmdooz, "General arrangement and naval architecture aspects in midget submarines", Proceedings of the 4th International Conference on Underwater System Technology Theory and Applications, Malaysia, 2012.
- A. Budiyono, "Advances in unmanned underwater vehicles technologies: modeling, control and guidance perspectives," Indian Journal of Marine Science, vol. 38, no. 3, pp. 282-295, 2009.
- J. M. Lee, J. Y. Park, B. Kim, and H. Baek, "Development of an autonomous underwater vehicle IsiMI6000 for deep sea observation," Indian Journal of Geo-Marine Science, vol. 42, no. 8, pp. 1034-1041, 2013.
- M. Moonesun, U. M. Korol, V. O. Nikrasov, S. Ardeshiri, and D. Tahvildarzade, "Proposing new criteria for submarine seakeeping evaluation", Proceedings of the 15th Marine Industries Conference (MIC2013), Kish Island, 2013.
- R. Burcher and L. J. Rydill, Concept in Submarine Design, Cambridge University Press, p. 295, 1998.
- ITTC, "Sample work instructions calibration of load cells," ITTC Recommended Procedures and Guidelines, Procedure 7.6-02-09, Revision 00, http://ittc.sname.org/CD%202011/pdf%20Procedures%202011/7.6-02-09.pdf, Accessed November 11, 2014.
- ITTC, "Ship models," ITTC Recommended Procedures and Guidelines, Procedure 7.5-01-01-01, Revision 03, http://ittc.sname.org/CD%202011/pdf%20Procedures%202011/7.5-01-01-01.pdf, Accessed November 11, 2014.
- ITTC, "Testing and extrapolation methods, general guidelines for uncertainty analysis in resistance towing tank tests," ITTC Recommended Procedures and Guidelines, Procedure 7.5-02-02-02, Revision 01, http://ittc.sname.org/CD%202011/pdf%20Procedures%202011/7.5-02-02-02.pdf, Accessed November 11, 2014.
- P. N. Joubert, Some Aspects of Submarine Design: Part 1: Hydrodynamics, Australian Department of Defense, 2004.
- M. Mackay, The Standard Submarine Model, A Survey of Static Hydrodynamic Experiments and Semiempirical Predictions, Defence R&D Canada, 2003.
- J. H. Ferziger, M. Peric, Computational Method for Fluid Dynamics, Springer., verlag Berlin Heidelberg New York, p. 423, 2002.
- R. Roddy, Investigation of the Stability and Control Characteristics of Several Configurations of the DARPA SUBOFF Model (DTRC Model 5470) from Captive-Model Experiments, Report No. DTRC/SHD-1298-08, 1990.
- S. Shi, X. Chen, J. Tan, "Study of resistance performance of vessels with notches by experimental and computational fluid dynamics calculation methods," Journal. of Shanghai Jiaotong University, vol. 15, pp. 340-345, 2010. https://doi.org/10.1007/s12204-010-1014-2
- P. Timothy, Verification of a Six-degree of Freedom Simulation Model for the REMUS Autonomous Underwater Vehicle, MS Thesis, Joint Program in Applied Ocean Science and Engineering, Massachusetts Institute of Technology, Department of Ocean Engineering., Mechanical Engineering, Woods Hole Oceanographic Institution, University of California at Davis, 2001.
- P. C. Praveen, P. Krishnankutty, "Study on the effect of body length on hydrodynamic performance of an axi-symmetric underwater vehicle," Indian Journal of Geo-Marine Science, vol. 42, no. 8, pp. 1013-1022, 2013.
Cited by
- Optimization on submarine stern design vol.231, pp.1, 2017, https://doi.org/10.1177/1475090215625673
- Computational fluid dynamics analysis on the added resistance of submarine due to Deck wetness at surface condition vol.231, pp.1, 2017, https://doi.org/10.1177/1475090215626462
- Numerical Flow Characterization around a Type 209 Submarine Using OpenFOAM vol.6, pp.2, 2014, https://doi.org/10.3390/fluids6020066