Steel and Composite Structures

  • 제16권1호
  • /
  • Pages.59-75
  • /
  • 2014
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Axial behavior of steel-jacketed concrete columns

  • Rupp, J. (The Ohio State University, Department of Civil, Environmental and Geodetic Engineering) ;
  • Sezen, H. (The Ohio State University, Department of Civil, Environmental and Geodetic Engineering) ;
  • Chaturvedi, S. (The Ohio State University, Department of Civil, Environmental and Geodetic Engineering)
  • 투고 : 2012.11.25
  • 심사 : 2013.09.18
  • 발행 : 2014.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A new concrete confinement model is developed to predict the axial load versus displacement behavior of circular columns under concentric axial load. The new confinement model is proposed for concrete filled steel tube columns as well as circular reinforced concrete columns with steel tube jacketing. Existing confinement models were evaluated and improved using available experimental data from different sets of columns tested under similar loading conditions. The proposed model is based on commonly used confinement models with an emphasis on modifying the effective confining pressure coefficient utilizing the strength of the unconfined concrete and the steel tube, the length of the column, and the thickness of the steel tube. The proposed model predicts the ultimate axial strength and the corresponding strain with an acceptable degree of accuracy while also highlighting the importance of the manner in which the steel tube is used.

키워드

참고문헌

  1. Ahmad, S.H. and Shah, S.P. (1982), "Stress-strin curves of concrete confined by spiral reinforcement", ACI J., 79(6), 484-490.
  2. Assa, B., Nishiyama, M. and Watanabe, F. (2001), "New approach for modeling confined concrete. I: Circular columns", ACI Struct. J., 127(7), 743-750.
  3. Attard, M.M. and Setunge S. (1996), "Stress-strain relationship of unconfined and unconfined concrete", ACI Mater. J., 93(5), 432-441.
  4. De Oliveira, W.L.A., De Nardin, S., El Debs, A.L.H. and El Debs, M.K. (2010), "Evaluation of passive confinement in CFT columns", J. Construct. Steel Res., 66(4), 487-495. https://doi.org/10.1016/j.jcsr.2009.11.004
  5. Giakoumelis, G. and Lam, D. (2004), "Axial capacity of circular concrete-filled tube columns", J. Construct. Steel Res., 60(7), 1049-1068. https://doi.org/10.1016/j.jcsr.2003.10.001
  6. Gupta, P.K., Sarda, S.M. and Kumar, M.S. (2007), "Experimental and computational study of concrete filled steel tubular columns under axial loads", J. Construct. Steel Res., 63(2), 182-193. https://doi.org/10.1016/j.jcsr.2006.04.004
  7. Hatzigeorgiou, G.D. (2008), "Numerical model for the behavior and capacity of circular CFT columns, part I: theory", Eng. Struct., 30(6), 1573-1578. https://doi.org/10.1016/j.engstruct.2007.11.001
  8. Knowles, R.B. and Park, R. (1969), "Strength of concrete-filled steel tubular columns", J. Struct. Div., 95(12), 2565-2587.
  9. Liu, J. and Zhou, X. (2010), "Behavior and strength of tubed RC stub columns under axial compression", J. Construct. Steel Res., 66(1), 28-36. https://doi.org/10.1016/j.jcsr.2009.08.006
  10. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  11. O'Shea, M.D. and Bridge, R.Q. (2000), "Design of circular thin-walled concrete filled steel tubes", ASCE J. Struct. Eng., 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  12. Rupp. J. (2012), "Modeling of steel-jacketed reinforced concrete under axial compressive loads", Master's Thesis, The Ohio State University, Columbus, OH, p. 211.
  13. Saatcioglu, M. and Razvi, S.R. (1992), "Strength and ductility of confined concrete", ASCE J. Struct. Eng., 118(6), 1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)
  14. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", ASCE J. Struct. Eng., 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  15. Sezen, H. and Miller, E.A. (2011), "Experimental evaluation of axial behavior of strengthened circular reinforced-concrete columns", ASCE J. Bridge Eng., 16(2), 238-247. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000143
  16. Sezen, H. and Shamsai, M. (2008), "High-strength concrete columns reinforced with prefabricated cage system", ASCE J. Struct. Eng., 134(5), 750-757. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:5(750)
  17. Yu, Z., Ding, F. and Cai, C.S. (2007), "Experimental behavior of circular concrete-filled steel tube stub columns", J. Construct. Steel Res., 63(2), 165-174. https://doi.org/10.1016/j.jcsr.2006.03.009
  18. Zhong, S.T. and Miao, R.Y. (1987), "Stress-strain relationship and strength of concrete filled tubes", Composite construction in Steel and Concrete, Proceedings of Engineering Foundation Conference, pp. 773-785.