DOI QR코드

DOI QR Code

High-Efficiency Supercapacitor Charger Using an Improved Two-Switch Forward Converter

  • Choi, Woo-Young (Division of Electronic Engineering, Chonbuk National University) ;
  • Yang, Min-Kwon (Division of Electronic Engineering, Chonbuk National University) ;
  • Suh, Yongsug (Department of Electrical Engineering, Chonbuk National University)
  • Received : 2013.06.20
  • Published : 2014.01.20

Abstract

This paper proposes a high-efficiency supercapacitor charger. Conventional two-switch forward converter can be used for charging supercapacitors. However, the efficiency of conventional converters is low because of their switching losses. This study presents a high-efficiency two-switch forward converter for supercapacitor chargers. The proposed converter improves power efficiency by 4 %, from 89 % to 93 %. The proposed converter has the advantages of reduced switch voltage stresses and minimized circulating current when compared to other converter topologies. The performance of the proposed converter is evaluated by experimental results using a 300 W prototype circuit for a 54-V, 35-F supercapacitor bank.

Keywords

References

  1. S. H. Kim, and W. J. Choi, "Selection criteria for supercapacitors based on performance evaluations," Journal of Power Electronics, Vol. 12, No. 1, pp. 223-231, Jan. 2012. https://doi.org/10.6113/JPE.2012.12.1.223
  2. M. Zandi, A. Payman, J.-P. Martin, S. Pierfederici, B. Davat, and F. Meibody-Tabar, "Energy management of a fuel cell/supercapacitor/battery power source for electric vehicular applications," IEEE Trans. Veh. Technol., Vol. 60, No. 2, pp. 433-443, Feb. 2011. https://doi.org/10.1109/TVT.2010.2091433
  3. S. Kim, and P. H. Chou, "Size and topology optimization for supercapacitor-based sub-watt energy harvesters," IEEE Trans. Power Electron., Vol. 28, No. 4, pp. 2068-2080, Apr. 2013. https://doi.org/10.1109/TPEL.2012.2203147
  4. H. Gualous, H. Louahlia, and R. Gallay, "Supercapacitor characterization and thermal modelling with reversible and irreversible heat effect," IEEE Trans. Power Electron., Vol. 26, No. 11, pp. 3402-3409, Nov. 2011. https://doi.org/10.1109/TPEL.2011.2145422
  5. T. S. Hwang, M. J. Tarca, and S. Y. Park, "Dynamic response analysis of DC-DC converter with supercapacitor for direct borohydride fuel cell power conditioning system," IEEE Trans. Power Electronics, Vol. 27, No. 8, pp. 3605-3615, Aug. 2012. https://doi.org/10.1109/TPEL.2012.2185711
  6. S. Moisseev, S. Hamada, M. Ishitobi, E. Hiraki, and M. Nakaoka, "High-frequency forward transformer linked PWM DC-DC power converter with zero voltage switching and zero current switching bridge legs," Journal of Power Electronics, Vol. 2, No. 4, pp. 278-287, Oct. 2002.
  7. S. S. Lee, S. W. Choi, and G. W. Moon, "High efficiency active clamp forward converter with synchronous switch controlled ZVS operation," Journal of Power Electronics, Vol. 6, No. 2, pp. 131-138, Apr. 2006.
  8. L. D. Salazar and P. D. Ziogas, "A high-frequency two-switch forward converter with optimized performance," IEEE Trans. Industrial Electronics, Vol. 37, No. 6, pp. 496-505, Dec. 1990. https://doi.org/10.1109/41.103454
  9. Y. T. Jang, M. M. Jovanovic, and D. L. Dillman, "Soft-switched PFC boost rectifier with integrated ZVS two-switch forward converter," IEEE Trans. Power Electron., Vol. 21, No. 6, pp. 1600-1606, Nov. 2006.
  10. M. Prudik and P. Vorel, "Advantages of using two-switch forward converter for high-voltage applications," in Proc. SPEEDAM, pp. 326-330, 2012.
  11. P. Kong, S. Wang, F. C. Lee, and Z. Wang, "Reducing common-mode noise in two-switch forward converter," IEEE Trans. Power Electron., Vol. 26, No. 5, pp. 1522-1533, May 2011.
  12. L. D. Salazar, and P. D. Ziogas, "Design and evaluation of two types of controllers for a two-switch forward converter with extended duty cycle capability," IEEE Trans. Ind. Electron., Vol. 39, No. 2, pp. 128-140, Apr. 1992. https://doi.org/10.1109/41.166734
  13. K. B. Park, G. W. Moon, and M. J. Yoon, "Two-switch active-clamp forward converter with one clamp diode and delayed turnoff gate signal," IEEE Trans. Ind. Electron., Vol. 58, No. 10, pp. 4768-4772, Oct. 2011. https://doi.org/10.1109/TIE.2011.2107710
  14. K. B. Park, C. E. Kim, G. W. Moon, and M. J. Yoon, "Three-switch active-clamp forward converter with low switch voltage stress and wide ZVS range for high-input-voltage applications," IEEE Trans. Power Electron., Vol. 25, No. 4, pp. 889-898, Apr. 2010. https://doi.org/10.1109/TPEL.2009.2036620
  15. B. Y. Chen, and Y. S. Lai, "New digital-controlled technique for battery charger with constant current and voltage control without current feedback," IEEE Trans. Ind. Electron., Vol. 59, No. 3, pp. 1545-1553, Mar. 2012. https://doi.org/10.1109/TIE.2011.2167115
  16. K. Harada, and H. Sakamoto, "Non-resonant converter for megahertz switching," in Proc. PESC, pp. 889-894, 1989.
  17. R. Redl, N. O. Sokal, and L. Balogh, "A novel soft-switching full-bridge dc/dc converter: analysis, design considerations, and experimental results at 1.5 kW, 100 kHz," IEEE Trans. Power Electron., Vol. 6, No. 3, pp. 408-418, Jul. 1991. https://doi.org/10.1109/63.85909
  18. C. Liu, A. Ridenour, and J. S. Lai, "Modeling and control of a novel six-leg three-phase high-power converter for low voltage fuel cell applications," IEEE Trans. Power Electron., Vol. 21, No. 5, pp. 1292-1300, Sep. 2006. https://doi.org/10.1109/TPEL.2006.880312

Cited by

  1. Active Damping of LLCL Filters Using PR Control for Grid-Connected Three-Level T-Type Converters vol.15, pp.3, 2015, https://doi.org/10.6113/JPE.2015.15.3.786
  2. Design of a Fuel Cell Power Conditioning System for Online Diagnosis and Load Leveling vol.16, pp.2, 2016, https://doi.org/10.6113/JPE.2016.16.2.695
  3. Two-Switch Forward Converter With Reset Winding and an Auxiliary Active-Clamp Circuit for a Wide Input Voltage Range vol.32, pp.6, 2017, https://doi.org/10.1109/TPEL.2016.2599268
  4. A Cooperative Charging Protocol for Onboard Supercapacitors of Catenary-Free Trams vol.26, pp.4, 2018, https://doi.org/10.1109/TCST.2017.2717382