DOI QR코드

DOI QR Code

FE modeling of inelastic behavior of reinforced high-strength concrete continuous beams

  • Lou, Tiejiong (CEMUC, Department of Civil Engineering, University of Coimbra) ;
  • Lopes, Sergio M.R. (CEMUC, Department of Civil Engineering, University of Coimbra) ;
  • Lopes, Adelino V. (Department of Civil Engineering, University of Coimbra)
  • 투고 : 2012.11.05
  • 심사 : 2013.12.27
  • 발행 : 2014.02.10

초록

A finite element model for predicting the entire nonlinear behavior of reinforced high-strength concrete continuous beams is described. The model is based on the moment-curvature relations pre-generated through section analysis, and is formulated utilizing the Timoshenko beam theory. The validity of the model is verified with experimental results of a series of continuous high-strength concrete beam specimens. Some important aspects of behavior of the beams having different tensile reinforcement ratios are evaluated. In addition, a parametric study is carried out on continuous high-strength concrete beams with practical dimensions to examine the effect of tensile reinforcement on the degree of moment redistribution. The analysis shows that the tensile reinforcement in continuous high-strength concrete beams affects significantly the member behavior, namely, the flexural cracking stiffness, flexural ductility, neutral axis depth and redistribution of moments. It is also found that the relation between the tensile reinforcement ratios at critical negative and positive moment regions has great influence on the moment redistribution, while the importance of this factor is neglected in various codes.

키워드

참고문헌

  1. ACI Committee 318 (2011), "Building code requirements for structural concrete (ACI 318-11) and commentary", American Concrete Institute, Farmington Hills, MI.
  2. Arslan, G. and Cihanli, E. (2010), "Curvature ductility prediction of reinforced high-strength concrete beam sections", J. Civil Eng. Manage., 16(4), 462-470. https://doi.org/10.3846/jcem.2010.52
  3. Bernardo, L.F.A. and Lopes, S.M.R. (2004), "Neutral axis depth versus flexural ductility in high-strength concrete beams", ASCE J. Struct. Eng., 130(3), 452-459. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(452)
  4. Bernardo, L.F.A. and Lopes, S.M.R. (2009), "Plastic analysis of HSC beams in flexure", Mater. Struct., 42, 51-69. https://doi.org/10.1617/s11527-008-9366-x
  5. Campione, G., Fossetti, M., Minafo, G. and Papia, M. (2012), "Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns", Eng. Struct., 34, 371-382. https://doi.org/10.1016/j.engstruct.2011.10.002
  6. Campione, G., Fossetti, M. and Papia, M. (2006), "Simplified analytical model for compressed high-strength columns confined by transverse steel and longitudinal bars", Proceedings of 2nd International FIB Congress, Naples, Italy.
  7. Canadian Standards Association (2004), "Design of concrete structures (A23.3-04)", Mississauga, Ontario, Canada.
  8. Carmo, R.N.F. (2004), "Plastic rotation and moment redistribution in high strength concrete beams", PhD Thesis, University of Coimbra, Coimbra, Portugal. (in Portuguese)
  9. Carmo, R.N.F. and Lopes, S.M.R. (2005), "Ductility and linear analysis with moment redistribution in reinforced high-strength concrete beams", Can. J. Civil Eng., 32, 194-203. https://doi.org/10.1139/l04-080
  10. Carmo, R.N.F. and Lopes, S.M.R. (2008), "Available plastic rotation in continuous high-strength concrete beams", Can. J. Civil Eng., 35, 1152-1162. https://doi.org/10.1139/L08-064
  11. CEB-FIP (1990), "Model code for concrete structures", Euro-International Committee for Concrete - International Federation for Prestressing, Thomas Telford Services Ltd., Lausanne, Switzerland.
  12. CEN (2004), "Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings", EN 1992-1-1, European Committee for Standardization, Brussels, Belgium.
  13. Cucchiara, C., Fossetti, M. and Papia, M. (2012), "Steel fibre and transverse reinforcement effects on the behaviour of high strength concrete beams", Struct. Eng. Mech., 42(4), 551-570. https://doi.org/10.12989/sem.2012.42.4.551
  14. Foster, S.J. (2001), "On behavior of high-strength concrete columns: cover spalling, steel fibers, and ductility", ACI Struct. J., 98(4), 583-589.
  15. Foster, S.J. and Attard, M.M. (2001), "Strength and ductility of fiber-reinforced high-strength concrete columns", ASCE J. Struct. Eng., 127(1), 28-34. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(28)
  16. Kassoul, A. and Bougara, A. (2010), "Maximum ratio of longitudinal tensile reinforcement in high strength doubly reinforced concrete beams designed according to Eurocode 8", Eng. Struct., 32, 3206-3213. https://doi.org/10.1016/j.engstruct.2010.06.009
  17. Ko, M.Y., Kim, S.W. and Kim, J.K. (2001), "Experimental study on the plastic rotation capacity of reinforced high strength concrete beams", Mater. Struct., 34, 302-311. https://doi.org/10.1007/BF02482210
  18. Kwan, A.K.H., Au, F.T.K. and Chau, S.L. (2004), "Theoretical study on effect of confinement on flexural ductility of normal and high-strength concrete beams", Mag. Concrete Res., 56(5), 299-309. https://doi.org/10.1680/macr.2004.56.5.299
  19. Lopes, S.M.R. and Bernardo, L.F.A. (2003), "Plastic rotation capacity of high-strength concrete beams", Mater. Struct., 36 22-31. https://doi.org/10.1007/BF02481567
  20. Lopes, S.M.R. and Carmo, R.N.F. (2006), "Deformable strut and tie model for the calculation of the plastic rotation capacity", Comput. Struct., 84, 2174-2183. https://doi.org/10.1016/j.compstruc.2006.08.028
  21. Pam, H.J., Kwan, A.K.H. and Ho, J.C.M. (2001), "Post-peak behavior and flexural ductility of doubly reinforced normal- and high-strength concrete beams", Struct. Eng. Mech., 12(5), 459-474. https://doi.org/10.12989/sem.2001.12.5.459
  22. Tan, T.H. and Nguyen, N.B. (2005), "Flexural behavior of confined high-strength concrete columns", ACI Struct. J., 102(2), 198-205.
  23. Yang, J.M., Min, K.H. and Yoon, Y.S. (2012), "Effect of anchorage and strength of stirrups on shear behavior of high-strength concrete beams", Struct. Eng. Mech., 41(3), 407-420. https://doi.org/10.12989/sem.2012.41.3.407

피인용 문헌

  1. Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams vol.70, 2015, https://doi.org/10.1016/j.compositesb.2014.10.044
  2. FE analysis of short- and long-term behavior of simply supported slender prestressed concrete columns under eccentric end axial loads causing uniaxial bending vol.85, 2015, https://doi.org/10.1016/j.engstruct.2014.12.023
  3. Effect of relative stiffness on moment redistribution in reinforced high-strength concrete beams vol.69, pp.14, 2017, https://doi.org/10.1680/jmacr.15.00499
  4. Redistribution of moments in reinforced high-strength concrete beams with and without confinement vol.55, pp.2, 2015, https://doi.org/10.12989/sem.2015.55.2.379
  5. Numerical modelling of nonlinear behaviour of prestressed concrete continuous beams vol.15, pp.3, 2015, https://doi.org/10.12989/cac.2015.15.3.373
  6. Prediction of Moment Redistribution in Statically Indeterminate Reinforced Concrete Structures Using Artificial Neural Network and Support Vector Regression vol.9, pp.1, 2018, https://doi.org/10.3390/app9010028
  7. A comprehensive FE model for slender HSC columns under biaxial eccentric loads vol.73, pp.1, 2014, https://doi.org/10.12989/sem.2020.73.1.017
  8. Torsional behaviour of high strength concrete beams with spiral reinforcement vol.22, pp.4, 2014, https://doi.org/10.1080/13287982.2021.1962489
  9. Flexural Behavior of Two-Span Continuous CFRP RC Beams vol.14, pp.22, 2021, https://doi.org/10.3390/ma14226746