DOI QR코드

DOI QR Code

Plating hardness and its effect to the form accuracy in shaping of corner cube on cu-plated steel plate using a single diamond tool

단결정 다이아몬드 공구에 의한 Corner Cube 가공 시, 형상정밀도에 미치는 동 도금층의 경도의 영향

  • Received : 2014.07.10
  • Accepted : 2014.10.11
  • Published : 2014.10.31

Abstract

This article presents machining experiments to assess the relationship between the profile accuracy and the workpiece hardness using a natural diamond tool on an ultra-precision diamond turning machine. The study is intended to secure a corner cube prism pattern for reflective film capable of high-quality outcomes. The optical performance levels and edge images of corner cubes having various hardness levels of the copper-coated layer on a carbon steel plate are analyzed. The hardness of the workpiece has a considerable effect on the profile accuracy. The higher the hardness of the workpiece, the better the profile accuracy and the worse the edge wear of the diamond tool.

Keywords

References

  1. T. J. Je, "A Study on Micro cutting technology for micro part" Thesis, Graduate School, Kum-Oh National Institute of Technology, 2004.
  2. A. B. Fraser, The Sylvanshine: Retroreflection from dew-covered trees", Appl. Opt. No. 33, 1994.
  3. J. B. Ko, G. H. Kim, and J. H. Won, " A study on the cutting characteristics of non-ferrous metals using diamond turning machine", Trans. of the Korean Society of Machine Tool Engineers, Vol. 10, No. 5, pp. 124-129, 2001.
  4. H. Kim and B. Lee, "Optimal design of retroreflection corner-cube sheets by geo- metric optics analysis,"Opt. Eng. Vol. 45, 094002, 2007.
  5. H. Kim, S. W. Min, and B. Lee,"Geometrical optics analysis of the structural imperfection of retroreflection corner cubes with a nonlinear conjugate gradient method," Appl. Opt. vol. 47, pp. 6453-6469, 2008. https://doi.org/10.1364/AO.47.006453
  6. H. C. Kim, "Experimental investigation on machining feasibility of micro patterns using a single crystal diamond tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 76-81, 2012.
  7. K. T. Min and H. S. Jang, "Cutting chip and surface roughness in micro groove cutting of brass", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 4, pp. 1-7, 2010.