References
- Brindley, W. J. and Miller, R. A., "Thermal Barrier Coating Evaluation Needs," NASA Technical Memorandum 103708, 1990.
- Madhwal, M., Jordan, E. H., and Gell, M., "Failure Mechanisms of Dense Vertically-Cracked Thermal Barrier Coatings," Materials Science and Engineering: A, Vol. 384, No. 1-2, pp. 151-161, 2004. https://doi.org/10.1016/j.msea.2004.05.061
- Gilbert F., "Method of Protecting Gas Turbine Combustor Components Against Water Erosion and Hot Corression," US Patent, No. 6047593 A, 2000.
- Freborg, A. M., Ferguson, B. L., Brindley, W. J., and Petrus, G. J., "Modeling Oxidation Induced Stresses in Thermal Barrier Coatings," Materials Science and Engineering: A, Vol. 245, No. 2, pp. 182-190, 1998. https://doi.org/10.1016/S0921-5093(97)00849-6
- Schaeffer J. C. and Bruce, R. W., "Thermal Barier Coating," US Patent, No. 6730413 B2, 2004.
- Spector, A. A., Ameen, M., and Popel, A. S., "Simulation of Motor-Driven Cochlear Outer Hair Cell Electromotility," Biophys J., Vol. 81, No. 1, pp. 11-24, 2001. https://doi.org/10.1016/S0006-3495(01)75676-7
- Taylor, T. A., "Thermal Barrier Coating For Substrates and Process for Producing It," US Patent, No. 5073433 A, 1991.
- Kim, D. J., "(The) Estimation of Delamination Life of the Plasma-Sprayed Thermal Barrier Coating for Gas Turbine Blade," Ph.D. Thesis, School of Mechanical Engineering, Sungkyunkwan Univ. 2009.
- Almeida, D. S., Silva, C. R. M., Nono, M. C. A., and Cairo, C. A. A., "Thermal Conductivity Investigation of Zirconia Co-Doped with Yttria and Niobia EBPVD Tbcs," Materials Science and Engineering: A, Vol. 443, No. 1-2, pp. 60-65, 2007. https://doi.org/10.1016/j.msea.2006.09.072
- Arnold, S. M., Pindera, M. J., and Aboudi, J., "Analysis of Plasma-Sprayed Thermal Barrier Coatings with Homogeneous and Heterogeneous Bond Coats under Spatially Uniform Cyclic Thermal Loading," NASA/TM, Paper No. 2003-210803, 2003.
- Ferguson, B. L., Petrus, G. J., and Krauss, T. M., "Modeling of Thermal Barrier Coatings," NASA Contractor Report, Paper No. NAS3-26664, 1992.
- Koo, J. M., Lee, S. Y., and Seok, C. S., "Top Coating Design Technique for Thermal Barrier of Gas Turbine," J. Korean Soc. Precis. Eng., Vol. 30, No. 8, pp. 802-808, 2013. https://doi.org/10.7736/KSPE.2013.30.8.802
Cited by
- Evaluation of Effect on Thermal Fatigue Life Considering TGO Growth vol.31, pp.12, 2014, https://doi.org/10.7736/KSPE.2014.31.12.1155
- Evaluation of the Mechanical Characteristics According to the Curvature of Thermal Barrier Coating vol.38, pp.12, 2014, https://doi.org/10.3795/KSME-A.2014.38.12.1427
- Evaluation of thermal gradient mechanical fatigue characteristics of thermal barrier coating, considering the effects of thermally grown oxide vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0220-0
- The study on delamination life of TBC through burner-rig test vol.18, pp.4, 2017, https://doi.org/10.1007/s12541-017-0066-8
- TBC delamination life prediction by stress-based delamination map vol.4, pp.1, 2017, https://doi.org/10.1007/s40684-017-0009-y
- Life Prediction Method for Thermal Barrier Coating of High-Efficiency Eco-Friendly Combined Cycle Power Plant pp.2198-0810, 2019, https://doi.org/10.1007/s40684-019-00066-9