Abstract
This paper is based on the fabrication of wireless control system for the building shading device. RF Module was controlled by UHF wireless CC1020 chip which has low electrical power and low electrical voltage. Also 447.8625~447.9875 frequency, 4800Baud data rate and 12.5 kHz channel spacing was controlled by the use of SPDT switch and with Microcontroller program. Furthermore, the helical antenna was used. The starting production of 447.8625~447.9875 kHz wireless electrical power was used. As the result, it did not exceed 10dBm which is the standard of low power wireless system. Shading efficiency was measured at 25%, 50%, 75% direction with controlling the interior temperature and the intensity of illumination at the rate of 1 hour. As the result, the intensity of illumination was lowered to 82~87% at 25% direction with $0.6{\sim}1.4^{\circ}C$ lowered temperature. At 50% direction, the intensity of illumination was lowered to 60~68% with $2.3{\sim}4.1^{\circ}C$ lowered temperature. And at 75% direction, the intensity of illumination was lowered to 41~47% with $3.4{\sim}5.1^{\circ}C$ lowered temperature.
본 논문은 건물 차양을 위한 RF 제어 시스템 제작에 관한 연구이다. 저전력, 저전압 UHF 무선 송 수신 칩인 CC1020을 사용하여 주파수 447.8625~447.9875, Data rate 4800Baud, Channel spacing 12.5kHz, SPDT 스위치로 입출력 분리하여 설계하여 Microcontroller 프로그램 하였다. 안테나는 나선형 Helical 안테나 형태로 제작하였다. 시작 제품을 주파수 447.8625~447.9875 무선 공중선 전력을 측정하여 실험한 결과 소출력 무선기기 기준인 10dBm을 넘지 않았다. 차양 효과 실험은 차양을 25%, 50%, 75% 위치에서 실내 온도 및 조도를 1시간 단위로 측정하였다. 실험결과 25% 위치시 조도는 82~87%로 낮아지고, 온도는 $0.6{\sim}1.4^{\circ}C$ 낮아졌으며, 50% 위치시 조도는 60~68%로 낮아지고, 온도는 $2.3{\sim}4.1^{\circ}C$ 낮아졌다. 75% 위치시 조도는 41~47% 낮아지고, 온도는 $3.4{\sim}5.1^{\circ}C$가 낮아졌다.
