참고문헌
- M. Nakamoto, M. Yamamoto, Y. Kashiwagi, H. Kakiuchi, T. Tsujimoto and Y. Yoshida, "A Variety of Silver Nanoparticle Pastes for Fine Electronic Circuit Pattern Formation", Proc. 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics (Polytronic 2007), Tokyo, 105, IEEE (2007).
- D.-H. Kim, S. Yoo, C.-W. Lee and T.-Y. Lee, "Temperature Measurement and Contact Resistance of Au Stud Bump Bonding and Ag Paste Bonding with Thermal Heater Device", J. Microelectron. Packag. Soc., 17(2), 55 (2010).
- H. T. Hai, J. G. Ahn, D. J. Kim, J. R. Lee, H. S. Chung and C. O. Kim, "Developing Process for Coating Copper Particles with Silver by Electroless Plating Method", Suf. Coat. Technol., 201, 3788 (2006). https://doi.org/10.1016/j.surfcoat.2006.03.025
-
M. Tsuji, S. Hikino, Y. Sano and M. Horigome, "Preparation of Cu@Ag Core-Shell Nanoparticles Using a Two-step Polyol Process under Bubbling of
$N_2$ Gas", Chem. Lett., 38, 518 (2009). https://doi.org/10.1246/cl.2009.518 - Y. Peng, C. Yang, K. Chen, S. R. Popuri, C. Lee and B. Tang, "Study on Synthesis of Ultrafine Cu-Ag Core-Shell Powders with High Electrical Conductivity", Applied Surface Science, 263, 38 (2012). https://doi.org/10.1016/j.apsusc.2012.08.066
- A. Muzikansky, P. Nanikashvili, J. Grinblat and D. Zitoun, "Ag Dewetting in Cu@Ag Monodisperse Core-Shell Nanoparticles", J. Phys. Chem. C, 117, 3093 (2013).
- H. T. Hai, H. Takamura and J. Koike, "Oxidation Behavior of Cu-Ag Core-Shell Particles for Solar Cell Applications", Journal of Alloys and Compounds, 564, 71 (2013). https://doi.org/10.1016/j.jallcom.2013.02.048
- S.-S. Chee and J.-H. Lee, "Preparation and Oxidation Behavior of Ag-Coated Cu Nanoparticles Less Than 20 nm in Size", J. Mater. Chem. C, 2, 5372 (2014). https://doi.org/10.1039/c4tc00509k
- J. H. Kim and J.-H. Lee, "Effects of Pretreatment and Ag Coating Processes Conditions on the Properties of Ag-Coated Cu Flakes", Kor. J. Mater. Res., 24(11), 617 (2014). https://doi.org/10.3740/MRSK.2014.24.11.617
- R. Zhang, W. Lin, K. Lawrence and C. P. Wong, "Highly Reliable, Low Cost, Isotropically Conductive Adhesives Filled with Ag-coated Cu Flakes for Electronic Packaging Applications", Int. J. Adhes. Adhes., 30(6), 403 (2010). https://doi.org/10.1016/j.ijadhadh.2010.01.004
- S.-S. Chee and J.-H. Lee, "Effects of Process Parameters in Synthesizing Sn Nanoparticles via Chemical Reduction", Electron. Matter. Lett., 8(1), 53 (2012). https://doi.org/10.1007/s13391-011-0510-3
- L. Froyen, L. Delaey, X. P. Niu, P. LeBrun and C. Peytour, "Synthesizing Aluminum Alloys by Double Mechanical Alloying", JOM, 47(3), 16 (1995).
- X. P. Niu, L. Froyen, L. Delaey and C. Peytour, "Hydride Formation in Mechanically Alloyed Al-Zr and Al-Fe-Zr", Scripta Metall. Mater., 30(1), 13 (1994). https://doi.org/10.1016/0956-716X(94)90350-6
- L. Lu, M. O. Lai and C. W. Ng, "Enhanced Mechanical Properties of an Al Based Metal Matrix Composite Prepared Using Mechanical Alloying", J. Mater. Sci. Eng. A, 252(2), 203 (1998). https://doi.org/10.1016/S0921-5093(98)00676-5
- S.-H. Hong and B.-K. Kim, "Effects of Lifter Bars on the Ball Motion and Aluminum Foil Milling in Tumbler Ball Mill", Mater. Lett., 57(2), 275 (2002). https://doi.org/10.1016/S0167-577X(02)00778-4
피인용 문헌
- Graphene Oxide 첨가에 따른 Sn-3.0Ag-0.5Cu 무연솔더 접합부의 Electromigration 특성 분석 vol.26, pp.3, 2019, https://doi.org/10.6117/kmeps.2019.26.3.081