품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제42권4호
  • /
  • Pages.607-616
  • /
  • 2014
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지
DOI QR코드

DOI QR Code

측정시스템 분석을 위한 2차원 척도 평가

Two-Dimensional Assessment for Measurement System Analysis

  • 서순근 (동아대학교 산업경영공학과)
  • Seo, Sun-Keun (Dept. of Industrial & Management Systems Engineering, Dong-A University)
  • 투고 : 2014.08.20
  • 심사 : 2014.11.28
  • 발행 : 2014.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: This paper reviews popular measurement system indices and proposes a procedure for assessing a measurement system using two parameters with intraclass correlation and a factor for process capability. Methods: Gage Repeatability and Reproducibility(GR&R), precision-to-tolerance ratio(PTR), number of distinct categories, producer's and consumer's risks are employed to assess the measurement capabilities and discuss the relationships between measurement system metrics. Results: Two-dimensional plot by two parameters is presented to assess adequacy of the measurement system and process capability. A numerical example and previously studied case study are provided for illustration. Conclusion: The procedure proposed in this paper using two-dimension parameters provides a valuable procedure and helpful guidelines to quality and production managers in assessing the capabilities of a measurement system and choosing the needed actions to be the most benefit.

키워드

참고문헌

  1. Al-Rafaie, Abbas, and Bata, Nour. 2010. "Evaluating Measurement and Process Capabilities by GR&R with Four Quality Measures." Measurement 43:842-851. https://doi.org/10.1016/j.measurement.2010.02.016
  2. Automotive Industry Action Group. 2010. Measurement Systems Analysis, 4th ed. Detroit(USA): AIAG.
  3. Burdick, Richard K., Borror, Connie M., and Montgomery, Douglas C. 2003. "A Review of Methods for Measurement Systems Capability Analysis." Journal of Quality Technology 35:342-354. https://doi.org/10.1080/00224065.2003.11980232
  4. Chang, Mu Sung, and Kim, Sang Bu. 2007. "Estimations of Measurement System Variability and PTR under Nonnormal Measurement Error." Journal of the Korean Society for Quality Management 35: 10-9.
  5. Chen, Wen-Kuei, and Hu, Cheng-Feng. 2014. "Is the Isoplot an Ellipse?, A Study on Isoplot for the Measurement Systems Analysis." Quality Engineering 26:350-358. https://doi.org/10.1080/08982112.2013.856446
  6. Choi, Cheonkyu. 2006. "A Case Study for Improvement of EOP Measurement System through 6 Sigma Introduction." Journal of the Korean Society for Quality Management 34:51-62.
  7. Cox, David R., and Wermuth, Nanny. 1991. "A Simple Approximation for Bivariate and Trivariate Normal Integrals." International Statistical Review 59:263-269. https://doi.org/10.2307/1403446
  8. Doganaksoy, Necip. 2000. "Assessment of Impact of Measurement Variability in the Presence of Multiple Sources of Product Variability." Quality Engineering 13:83-89.
  9. Engel, Jen, and De Vries, Bert. 1997. "Evaluating a Well-Known Criterion for Measurement Precision." Journal of Quality Technology 29:469-476. https://doi.org/10.1080/00224065.1997.11979798
  10. Lee, Seung-Hoon, and Lee, Jong-Hwan. 2000. "A Statistical Software for Measurement Systems Analysis." Journal of the Korean Society for Quality Management 28:175-195.
  11. Mader, Douglas P., Prins, Jack, and Lampe, Rod E. 1999. "The Economic Impact of Measurement Error." Quality Engineering 11:563-574. https://doi.org/10.1080/08982119908919276
  12. Majeske, Karl D., and Andrews, Richard W. 2002. "Evaluating Measurement Systems and Manufacturing Processes Using Three Quality Measures." Quality Engineering 15:243-251. https://doi.org/10.1081/QEN-120015856
  13. Wheeler, Donald. J., and Lyday, Richard W. 1989. Evaluating the Measurement Process, 2nd ed. Knoxville, USA:SPC Press.
  14. White, T. Kelvin, and Borror, Connie M. 2011. "Two-Dimensional Guidelines for Measurement System Indices." Journal of Quality Technology 27:479-487.
  15. Woodall, William H., and Borror, Connie M. 2008. "Some Relationships between Gage R&R Criteria." Quality and Reliability Engineering International 24:99-106. https://doi.org/10.1002/qre.870