References
- Abdelgawad, M., and Fayek, A. R. 2010. "Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP." Journal of Construction Engineering and Management 136:1028-1036. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000210
- Agung, S., and Kwon, H. 2010. "An Expected Loss model f or Risk Prioritization in Service FMEA." Calif ornia Journal of Operations Management 8:27-38.
- Agung, S., and Kwon, H. 2012. "Corrective Action Strategy based on SWOT Analysis in Service FMEA." Journal of the Korean Society for Quality Management 40:25-38. https://doi.org/10.7469/JKSQM.2012.40.1.025
- Bertolini, M., Braglia, M., and Carmignani, G. 2006. "An FMECA-based Approach to Process Analysis." International Journal of Process Management and Benchmarking 20:127-145.
- Chang, D. S., and Sun, K. L. P. 2009. "Applying DEA to enhance assessment capability of FMEA." International Journal of Quality and Reliability Management 26:629-643. https://doi.org/10.1108/02656710910966165
- Chang, K. H., and Cheng, C. H. 2010. "A risk assessment methodology using intuitionistic fuzzy set in FMEA." International Journal of Systems Science 41:1457-1471. https://doi.org/10.1080/00207720903353633
- Chang, K. H., and Cheng, C. H. 2011. "Evaluating the risk of failure using the fuzzy OWA and DEMATEL method." journal of Intelligent Manufacturing 22:113-129. https://doi.org/10.1007/s10845-009-0266-x
- Chang, K. H., Cheng, C. H., and Chang Y. C. 2010. "Reprioritization of failures in a silane supply system using an intuitionistic fuzzy set ranking technique." Soft Computing 14:285-298. https://doi.org/10.1007/s00500-009-0403-7
- Chen, J. K. 2007. "Utility Priority Number Evaluation for FMEA." Journal of Failure Analysis and Prevention 5:321-328.
- Chin, K. S., Wang, Y. M., Poon, G. K. K., and Yang, J. B. 2009. "Failure mode and effects analysis by data envelopment analysis." Decision Support Systems 48:246-256. https://doi.org/10.1016/j.dss.2009.08.005
- Chin, K. S., Wang, Y. M., Poon, G. K. K., and Yang, J. B. 2009. "Failure mode and effects analysis using a group-based evidential reasoning approach." Computers and Operations Research 36:1768-1779. https://doi.org/10.1016/j.cor.2008.05.002
- Chrysler LLC, Ford Motor Company, and General Motors Corporation. 2008. FMEA Reference Manual, 4th ed.
- Ellims, M., and Monkhouse, H. E. 2012. "AGONISING OVER ASILS: Controllability and the In-Wheel Motor." System Safety, Proceedings at The Incorporation the cyber security conference, 1-8.
- Eubanks, C. F., Kmenta, S., and Ishii, K. 1997. "Advanced FMEA Using behavior Modeling." Proceedings of ASME Design Engineering Technical Conference, California: Sacramento, 1-10.
- Ford Design Institute. 2004. FMEA handbook, Version 4.1.
- Gargama, H., and Chaturvedi, S. K. 2011. "Criticality assessment models for failure mode effects and criticality analysis using fuzzy logic." IEEE transactions on Reliability 60:102-110. https://doi.org/10.1109/TR.2010.2103672
- Ireson, W. G., Coombs, Jr. C. F., and Moss, R. Y. 1996. "Handbook of reliability engineering and management Second Edition." McGraw-Hill.
- ISO 26262-1. 2011. Road vehicles -Functional safety-part 1: Vocabulary.
- ISO 26262-3. 2011. Road vehicles -Functional safety-part 3: Concept phase.
- ISO 26262-4. 2011. Road vehicles -Functional safety-part 4: Product development at the system level.
- ISO 26262-5. 2011. Road vehicles -Functional safety-part 5: Product development at the hardware level.
- Jeegadeshan, C., Arunachalam, V. P., Devadasan, S. R., and Srinivasan, P. S. S. 2007. "Design and Development of Modified Service FMEA Model." International Journal of Service and Operations Management 1:111-126.
- Kim, H., and Lee, N. 2012. "The Case Study on Sof tware FMEA for the Efficient Improvement of Functional Safety." KSAE 2012 Conference, 1303-1308.
- Kutulu, A. C., and Ekmekcioglu, M. 2012. "Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP." Expert Systems with Applications 39:61-67. https://doi.org/10.1016/j.eswa.2011.06.044
- Kwon, H. M., Hong, S. H., Lee, M. K., and Agung, S. 2011. "Risk Evaluation Based on the Time Dependent Expected Loss Model In FMEA." Journal of the Korea Society of Safety 6:104-110.
- Linton, J. D. 2003. "Facing the challenges of service automation: An enabler for e-commerce and productivity gain in traditional service." IEEE Trans, Eng., Manage 4:478-487.
- Liu, H. C., Liu, L., Bian, Q. H., Lin, Q. L., Dong, N., and Xu, P. C. 2011. "Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory." Expert Systems with Applications 38:4403- 4415. https://doi.org/10.1016/j.eswa.2010.09.110
- Liu, H. C., Liu, L., and Liu, N. 2013. "Risk Evaluation Approaches in Failure Mode and Effects Analysis: A Literature Review." Expert Systems with Applications 40:828-838. https://doi.org/10.1016/j.eswa.2012.08.010
- Liu, H. C., Liu, L., Liu, N., and Mao, L. X. 2012. "Risk Evaluation in Failure Mode and Effects Analysis with extended VIKOR method under fuzzy environment." Expert Systems with Applications 39:12926-12934. https://doi.org/10.1016/j.eswa.2012.05.031
- Onodera, K. 1997. "Effective techniques of FMEA at each life-cycle stage." Proceeding of Annual Reliability and Maintainability Symposium, 50-56.
- Oolkalkar, A. D., Joshi, A. G., and Oolkalkar, D. S. 2009. "Quality Improvement in Haemodialysis Process Using FMEA." International Journal of Quality and Reliability Management 8:817-830.
- Reiling, J. G., Knutzen, B. L., and Stoechlein, M. 2003. "FMEA-the cure for medical errors." Qual. Progr. 8:67-71.
- Sankar, N. R., and Prabhu, B. S. 2001. "Modified approach for prioritization of failures in a system failure mode and effects analysis." International journal of Qaulity & Reliability Management 3:324-335.
- Sawhney, R., Padiyar, A., and Li, Y. 2004. "FMEA based approach for supplier development." Proceedings of IIE Annual Conference and Exhibition 7-16.
- Shahin, A. 2004. "Integration of FMEA and the Kano model: An exploratory examination." Int. J. Qual. Reliab. Manage 21:731-746. https://doi.org/10.1108/02656710410549082
- Tay, K. M., and Lim, C. P. 2010. "Enhancing the failure mode and effect analysis methodology with fuzzy inference techniques." Journal of Intelligent and Fuzzy Systems 21:135-146.
- Wang, Y. M., Chin, K. S., Poon, G. K. K., and Yang, J. B. 2009. "Risk Evaluation in failure mode and effects analysis using fuzzy weighted geometric mean." Expert Systems with Applications 36:1195-1207. https://doi.org/10.1016/j.eswa.2007.11.028
- Xiao, N. C., Huang, H. Z., Li, Y. F., He, L. P., and Jin, T. D. 2011. "Multiple failure modes analysis and weighted risk priority number evaluation in FMEA." Engineering Failure Analysis 18:1162-1170. https://doi.org/10.1016/j.engfailanal.2011.02.004
- Xie, Y., Li, J., and Zhang, A. 2011. "Extended FMEA Method Applied in the Field of Functional Safety." Maintainability and Safety(ICRMS), 9th International Conference on Reliability, 615-618.
- Yang, J., Huang, H. Z., He, L. P., Zhu, S. P., and Wen, D. 2011. "Risk evaluation in failure mode and effects analysis of aircraft turbine rotor blades using Dempster-Shafer evidence theory under uncertainty." Engineering Failure Analysis 18:2084-2092. https://doi.org/10.1016/j.engfailanal.2011.06.014
- Zammori, F., and Gabbrielli, R. 2011. "ANP/RPN: A multi criteria evaluation of the risk priority number." Quality and Reliability Engineering International 28:85-104.
- Zhang, H., Li, W., and Quin, J. 2010. "Model-based Functional Safety Analysis Method for Automotive Embedded System Application." International Conference on Intelligent Control and Information Processing, China: Dalian. August 13-15.
- Zhang, Z. F., and Chu, X. N. 2011. "Risk prioritization in failure mode and effects analysis under uncertainty." Expert Systems with applications 38:206-214. https://doi.org/10.1016/j.eswa.2010.06.046
- Zhao, X. 2011. "A Process Oriented Quality Control Approach Based on Dynamic SPC and FMEA." Int. J. of Industrial Engineering: Theory, Applications and Practice 18:444-451.
Cited by
- Risk Evaluation in FMEA when the Failure Severity Depends on the Detection Time vol.31, pp.4, 2016, https://doi.org/10.14346/JKOSOS.2016.31.4.136