International Journal of Naval Architecture and Ocean Engineering

  • 제6권3호
  • /
  • Pages.749-761
  • /
  • 2014
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Study of the sealing performance of tubing adapters in gas-tight deep-sea water sampler

  • Huang, Haocai (Ocean College, Zhejiang University) ;
  • Yuan, Zhouli (Ocean College, Zhejiang University) ;
  • Kang, Wuchen (Ocean College, Zhejiang University) ;
  • Xue, Zhao (Administration and Service Center of Qingdao National Oceanography Laboratory) ;
  • Chen, Xihao (Ocean College, Zhejiang University) ;
  • Yang, Canjun (State Key Lab of Fluid Power Transmission and Control, Zhejiang University) ;
  • Ye, Yanying (Ocean College, Zhejiang University) ;
  • Leng, Jianxing (Ocean College, Zhejiang University)
  • 발행 : 2014.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Tubing adapter is a key connection device in Gas-Tight Deep-Sea Water Sampler (GTWS). The sealing performance of the tubing adapter directly affects the GTWS's overall gas tightness. Tubing adapters with good sealing performance can ensure the transmission of seawater samples without gas leakage and can be repeatedly used. However, the sealing performance of tubing adapters made of different materials was not studied sufficiently. With the research discussed in this paper, the materials match schemes of the tubing adapters were proposed. With non-linear finite element contact analysis and sea trials in the South China Sea, it is expected that the recommended materials match schemes not only meet the requirements of tubing adapters' sealing performance but also provide the feasible options for the following research on tubing adapters in GTWS.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Funds of China

참고문헌

  1. Abid, M. and Ullah, B., 2007. Three-dimensional nonlinear finite-element analysis of gasketed flange joint under combined internal pressure and variable temperatures. Journal of Engineering Mechanics, 133(2), pp.222-229. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:2(222)
  2. Byun, W., Kim, M.K., Park, K.J., Kim, S, J., Chung, M., Cho, J.Y. and Park, S.H., 2011. Buckling analysis and optimal structural design of supercavitating vehicles using finite element technology. International Journal of Naval Architecture and Ocean Engineering, 3(4), pp.274-285. https://doi.org/10.3744/JNAOE.2011.3.4.274
  3. Gu, Y.Q., 2000. Principles for selecting seal face mean sealing pressure of mechanical seals. Petro Chemical Equipment, 29(2), pp.21-24.
  4. Huang, H.C., 2010. The design and sea trials of deep-sea gas-tight water sampling system. Ph.D. Zhejiang University.
  5. Houghton, J.T., Ding, Y., Griggs, D.J., Noguer, M., van der Linden, P.J., Dai, X., Maskell, K. and Johnson, C.A., 2001. Climate Change 2001: The Scientific Basis. Intergovernmental panel on climate change (IPCC) third assessment report. UK: Cambridge University Press.
  6. Huang, H.C., Ye, Y.Y., Yang, C.J., Leng, J.X. and Chen, Y., 2011. Study of the sealing characteristic of polytetrafluoroethylene- coated O-ring applied in gas-tight deep-sea water sampler. Advanced Materials Research, 295-297, pp.3-10. https://doi.org/10.4028/www.scientific.net/AMR.295-297.3
  7. Huang, H.C., Ye, Y.Y., Leng, J.X., Yuan, Z.L., and Chen, Y., 2012. Study on the pressure self-adaptive water-tight junction box in underwater vehicle. International Journal of Naval Architecture and Ocean Engineering, 4(3), pp.302-312. https://doi.org/10.3744/JNAOE.2012.4.3.302
  8. Kelley, D.S., Baross, J.A. and Delaney, J.R., 2002. Volcanoes, fluids, and life at mid-ocean ridge spreading centers. Annual Review of Earth Planetary Sciences, 30, pp.385-491. https://doi.org/10.1146/annurev.earth.30.091201.141331
  9. Kelley, D.S., Lilley, M.D., Lupton, J.E. and Olson, E.J., 1998. Enriched $H_2$, $CH_2$, and 3He concentrations in hydrothermal plumes associated with the 1996 Gorda Ridge eruptive event. Deep-Sea Research II, 45(12), pp.2665-2682. https://doi.org/10.1016/S0967-0645(98)00088-5
  10. Krishna, M.M., Shunmugam, M.S. and Siva, P.N., 2007. A study on the sealing performance of bolted flange joints with gaskets using finite element analysis. International Journal of Pressure Vessels and Piping, 84(6), pp.349-357. https://doi.org/10.1016/j.ijpvp.2007.02.001
  11. Li, L.P., 2003. The Model SJC6-15 CTD cap-clipped water sampler. China Ocean Technology, 22(4), pp.37-39.
  12. Lilley, M.D., Feeley, R.A. and Trefry, J.H., 1995. Chemical and biological transformations in hydrothermal plumes. In: Humphris, S.E., Zierenberg, R.A., Mullineaux, L.S., Thompson, R.E. (eds.) Seafloor Hydrothermal Systems: Physical, Chemical, Biological, and Geological Interactions. Washington, DC: American Geophysical Union (AGU), pp.369-391.
  13. Milkov, A.V., Claypoo, G.E., Lee, Y.J., Torres, M.E., Borowski, W.S., Tomaru, H., Sassen, R. and Long, P.E., 2004. Ethane enrichment and propane depletion in subsurface gases indicate gas hydrate occurrence in marine sediments at southern hydrate ridge offshore oregon. Organic Geochemistry, 35(9), pp.1067-1080. https://doi.org/10.1016/j.orggeochem.2004.04.003
  14. Mathan, G. and Prasad, N.S., 2008. A study on the Sealing performance of flange Joints with gaskets under external bending using finite-element analysis. Journal of Process Mechanical Engineering, 222(1), pp.21-29. https://doi.org/10.1243/09544089JPME155
  15. Nakayama, N., Watanabe, S. and Tsunogai, S., 2002. Nitrogen, oxygen and argon dissolved in the northern north Pacific in early summer. Journal of Oceanography, 58(6), pp.775-785. https://doi.org/10.1023/A:1022810827059
  16. Radford-Konery, J., Charlou, J.L., Donval, J.P., Aballea, M., Fouquet, Y. and Ondreas, H.,1998. Distribution of dissolved sulfide, methane, and manganese near the seafloor at the Lucky Strike (37$^{\circ}$17′N) and Menez Gwen (37$^{\circ}$50′N) hydrothermal vent sites on the mid-Atlantic Ridge. Deep-Sea Research I, 45(2-3), pp.367-386. https://doi.org/10.1016/S0967-0637(97)00082-4
  17. Sauter, E.J., Schlüter, M., Wegner, J. and Labahn, E., 2005. A routine device for high resolution bottom water sampling. Journal of Sea Research, 54(3), pp.204-210. https://doi.org/10.1016/j.seares.2005.04.005
  18. Song, H.C., Kim, T.J. and Jang, C.J., 2010. Structural design optimization of racing motor boat based on nonlinear finite element analysis. International Journal of Naval Architecture and Ocean Engineering, 2(4), pp.217-222. https://doi.org/10.3744/JNAOE.2010.2.4.217
  19. Subramanian, N.R., Koo, K.K. and Tye, C.Y., 2013. Non- linear deflection analysis of pin-on-package testing using FEA. IEEE 15th Electronics Packaging Technology Conference (EPTC 2013), pp.410-414.
  20. Taylor, C.D., Doherty, K.W., Molyneaux, S.J., Morrison III, A.T., Billings, J.D., Engstrom, I.B., Pfitsch, D.W. and Honjo S., 2006. Autonomous microbial sampler (AMS), a device for the uncontaminated collection of multiple microbial samples from submarine hydrothermal vents and other aquatic environment. Deep-Sea Research I., 53(5), pp.894-916. https://doi.org/10.1016/j.dsr.2006.01.009
  21. Tolosa, I., Garciandia, F., Zubiri, F., Zapirain, F. and Esnaola, A., 2010. Study of mechanical properties of AISI 316 stainless steel processed by "selective laser melting", following different manufacturing strategies. International Journal of Advanced Manufacturing Technology, 51(5-8), pp.639-647. https://doi.org/10.1007/s00170-010-2631-5
  22. Upchurch, 2012. P-350x. [online] Availiable at: [Accessed 28 November 2012].
  23. Wen, B.C., 2010. Machine design handbook. 5rd Ed. Beijing: China Machine Press.
  24. Yu, C.L and Lee, J.S., 2012.Ultimate strength of simply supported plate with opening under uniaxial compression. International Journal of Naval Architecture and Ocean Engineering, 4(4), pp.423-436. https://doi.org/10.3744/JNAOE.2012.4.4.423
  25. Zhang, L.Z., Li, M. and Hu, H., 2012. Study on mechanical properties of PEEK composites. Advanced Materials Research, 467-478, pp.519-525.