펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

삼 인피섬유 혼합율이 종이의 보존 특성에 미치는 영향

Permanent Characteristics of the Handsheet Mixed with Hemp Bast Fiber

  • 김준규 (강원대학교 산림환경과학대학 제지공학과) ;
  • 최경화 (강원대학교 창강제지기술연구소) ;
  • 이명구 (강원대학교 산림환경과학대학 제지공학과)
  • Kim, Jun-Kyu (Dept. of Paper Science & Engineering, College of Forest and Environmental Science, Kangwon National University) ;
  • Choi, Kyoung-Hwa (Changgang Institute of Paper Science and Technology, Kangwon National University) ;
  • Lee, Myoung-Ku (Dept. of Paper Science & Engineering, College of Forest and Environmental Science, Kangwon National University)
  • 투고 : 2014.12.10
  • 심사 : 2014.12.21
  • 발행 : 2014.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Despite the ubiquity of electronic media, paper is still the most generally readable carrier of information. Because paper materials are deteriorated by chemical, biological and physical factors over time, there have been major concerns about the decay of large collections of books, publications, old maps, historical artifacts, and written records. Therefore, manufacture of permanent paper has been a highly debated issue in paper conservation research. Through the use of permanent paper, our new records, journals, library books, art works, and all culturally and historically important documents can be preserved. In this study, handsheets were made of mixture of hemp bast fiber produced by soda pulping and HwBKP varying the amount of hemp. Physical, mechanical and optical properties of each handsheet were examined. As the ratio of hemp bast fiber increased, mechanical properties were improved significantly, but opacity decreased. After aging, the optical properties of the handsheets mixed with the hemp bast fiber more decreased than those of the non-mixed handsheet. The more mixture ratio of hemp bast fiber increased, the more decreasing rate of optical properties increased. As a result, it was confirmed that hemp bast fiber is a very promising resource for the manufacturing of permanent paper.

키워드

참고문헌

  1. Menart, E., Bruin, G. D., and Strlic, M., Dose-response functions for historic paper, Polymer Degradation and Stability 96:2029-2039 (2011). https://doi.org/10.1016/j.polymdegradstab.2011.09.002
  2. Cunha, G. M., Methods of evaluation to determine the preservation needs in libraries and archives: a RAMP study with guidelines, UNESCO, Paris (1988).
  3. Kundrot, R. A. and Zicherman, J. B., Paper permanence, In Encyclopedia of Materials: Science and Technology, Ed. Beal F. C., Elsevier Press, London, England, pp. 6678-6682 (2001).
  4. Choi, K. H. and Park, J. H., Effects of cooking chemicals and 'Hobun' on the property of lining paper, Surface and Interface Analysis 44:1522-1526 (2012). https://doi.org/10.1002/sia.4991
  5. Carter, H. A., The chemistry of paper preservation-Part 5. Permanent paper-, Journal of Chemical Education 84(12):1937-1940 (2007). https://doi.org/10.1021/ed084p1937
  6. Youn, H. J. and Cho, H., The requirements for permanent paper and evaluation of permanence of domestic printing and writing papers, Journal of Korea TAPPI 40(2):73-79 (2008).
  7. Correia, F., Roy, D. N., and Goel, K., Chemistry and delignification kinetics of Canadian industrial hemp, Journal of Wood Chemistry and Technology 21(1): 99-111 (2001).
  8. Correia, F., The characterization of hemp (Cannabis sativa L.) chemical pulp and paper, The thesis for the degree of doctor of Philosophym, Faculty of Forestry, University of Toronto, Canada (2004).
  9. Yoon, S. L. and Lee, M. K., Effective utilization of hemp fiber for pulp and papermaking (I)-Morphological characteristics of hemp fiber-, Journal of Korea TAPPI 42(1):7-12 (2010).
  10. Lee, M. K., Kim, J. S., and Yoon, S. L., Effective utilization of hemp fiber for pulp and papermaking (II), Journal of Korea TAPPI 43(5):27-33 (2011).
  11. Lee, D. H. and Lee, M. K., Manufacture of specialty paper with hemp bast fiber cultivated in Korea (Part 1) - Characteristics of hemp-wood paper by soda pulping -, Journal of the Korea TAPPI 45(6):30-35 (2013). https://doi.org/10.7584/ktappi.2013.45.6.030
  12. Kamat, J., Effect of harvesting time on the physical, chemical and pulping properties of hemp (Cannabis sativa L.), The thesis for the degree of Master of Science in Forestry, Faculty of Forestry, University of Toronto, Canada (2000).
  13. Herer, J., The Emperor Wears No Clothes, Ah Ha Publishing, US (1985).
  14. Bowyer, J. L., Industrial Hemp (Cannabis sativa L.) as a Papermaking Raw Material in Minnesota: Technical, Economic, and Environmental Considerations, Department of Wood & Paper Science Report Series (2001).
  15. Keller, A., Leupin, M., Mediavilla, V., and Wintermantel E., Influence of the growth stage of industrial hemp on chemical and physical properties of the fibres, Industrial Crops and Products 13:35-48 (2001). https://doi.org/10.1016/S0926-6690(00)00051-0
  16. Young, J. H., Fiber preparation and approach flow, In Pulp and Paper Chemistry and Chemical Technology, Ed. Casey, J. P., A Wiley-Interscience Publication, New York, pp. 821-914 (1980).
  17. Robinson, J. V., Fiber bonding, In Pulp and Paper Chemistry and Chemical Technology, Ed. Casey, J. P., A Wiley-Interscience Publication, New York, pp. 915-964 (1980)
  18. Wathen, R., Studies on fiber strength and its effect on paper properties, The thesis for the degree of Doctor, Helsinki University of Technology, Finland (2006).
  19. Zervos, S., Natural and accelerated ageing of cellulose and paper: A literature review, In Cellulose: Structure and Properties, Derivatives and Industrial Uses, Nova Science Publishers, Inc, New York, pp. 155-204 (2010).