References
- Yang, M. Y., Park, H. D., 1991, The Prediction of Cutting Force in Ball End Milling, Int. J. Mach. Tools Manufact. 31:1 45-54. https://doi.org/10.1016/0890-6955(91)90050-D
- Lim, E. M., Menq, C. H., 1995, The Prediction of Dimensional Error for Sculptured Surface Productions Using The Ball End Milling Process, Int. J. Mach. Tools Manufact. 35:8 1171-1185. https://doi.org/10.1016/0890-6955(94)00045-L
- Yucesan, G., Altintas, Y., 1996, Prediction of Ball End Milling Forces, J. Eng. Ind. 118:1 95-103. https://doi.org/10.1115/1.2803652
- Lee, P., Altintas, Y., 1996, Prediction of Ball End Forces from Orthogonal Cutting Data, Int. J. Mach. Tools Manufact. 36:9 1059-1072. https://doi.org/10.1016/0890-6955(95)00081-X
- Kim, G. M., Chu, C. N., 1998, Mean Cutting Force Prediction in Ball End Milling of Slanted Surface Using Force Map, J. Korean Soc. Precis. Eng. 15:12 212-219.
- Feng, H. Y., Menq, C. H., 1996, A Flexible Ball-end Milling System Model for Cutting Force and Machining Error Prediction, J. Manufact. Sci. Eng. 118:4 461-469. https://doi.org/10.1115/1.2831055
- Sharman, A., Dewes, R. C., Aspinwall, D. K., 2001, Tool Life when High Speed Ball Nose End Milling Inconel 718, J. Mat. Proc. Tech. 118:1 29-35. https://doi.org/10.1016/S0924-0136(01)00855-X
- Ning, L., Veldhuis, S. C., 2006, Mechanistic Modeling of Ball End Milling Including Tool Wear, J. Manufact. Proc. 8:1 21-28. https://doi.org/10.1016/S1526-6125(06)70098-6
- Cho, C. Y., Mun, S. D., Ryu, S. H., 2006, Effect of Cusp on the Cutting Characteristics and Tool Wear of Semifinishing in Ball End Milling, Trans. KSMTE 15:5 79-84.
- Yoon, J. H., 2007, Two dimensional Representation of Machining Geometry and Tool Path Generation for Ball end Milling of Sculptured Surfaces, Int. J. Prod. Res. 45:14 3151-3164. https://doi.org/10.1080/00207540600786657
- Chen, T., Shi, Z., 2008, A Tool Path Generation Strategy for Three axis Ball end Milling of Free form Surfaces, J. Mat. Proc. Tech. 208:1 259-263. https://doi.org/10.1016/j.jmatprotec.2007.12.142
- Ng, E. G., Lee, D. W., Sharman, A. R. C., Dewes, R. C., Aspinwall, D. K., Vigneau, J., 2000, High Speed Ball Nose End Milling of Inconel 718, CIRP Ann. 49:1 41-46. https://doi.org/10.1016/S0007-8506(07)62892-3
- Ning, Y., Rahman, M., Wong, Y. S., 2001, Investigation of Chip Formation in High Speed End Milling, J. Mat. Proc. Tech. 113:1 360-367. https://doi.org/10.1016/S0924-0136(01)00628-8
- Aoyama, H., Kisinami, T., Saito, K., 1987, Study on Development and Cutting Performance of Elliptic Ball End Mill, J. Japan Soc. Precis. Eng. 53:3 461-466. https://doi.org/10.2493/jjspe.53.461
- Jin, K., Tsukasa, K., Shunichi., K., Satoru, I., 2001, Wear Estimation of Ball End Mill and Its Application to Precision Machining of Curved Surface, J. Japan Soc. Precis. Eng. 67:9 1427-1431. https://doi.org/10.2493/jjspe.67.1427
- Lu, Y., Takeuchi, Y., Takahashi, I., Anzai, M., Kase, K., 2003, Fabrication of Ball End Mills for High Speed Milling and Their Cutting Characteristics, J. Japan Soc. Precis. Eng. 69:4 530-535. https://doi.org/10.2493/jjspe.69.530
- Chen, F., Hu, S., Yin, S., 2012, A Novel Mathematical Model for Grinding Ball end Milling Cutter with Equal Rake and Clearance Angle, Int. J. Adv. Manuf. Technol. 63:1 109-116. https://doi.org/10.1007/s00170-011-3889-y
- Ghani, J. A., Choudhury, I. A., Hassan, H. H., 2004, Application of Taguchi Method in the Optimization of End Milling Parameters, J. Mat. Proc. Tech. 145:1 84-92. https://doi.org/10.1016/S0924-0136(03)00865-3
- Kivak, T., 2014, Optimization of Surface Roughness and Flank Wear Using the Taguchi Method in Milling of Hadfield Steel with PVD and CVD Coated Inserts, Measurement 50 19-28. https://doi.org/10.1016/j.measurement.2013.12.017
Cited by
- Selection of the Efficient Superfinishing Condition on an Anodized Al7075 Surface in Experimental Design vol.33, pp.12, 2016, https://doi.org/10.7736/KSPE.2016.33.12.993
- Taguchi-based robust design for the footwear outsole pelletizing machine cutter vol.44, pp.4, 2016, https://doi.org/10.7469/JKSQM.2016.44.4.935
- A Study on the End Mill Shape Design for Machining of High Hardness Die Steels by Comparison of Cutting Force vol.36, pp.2, 2014, https://doi.org/10.7736/kspe.2019.36.2.141
- Cutting Characteristics and Deformation Analysis for Chord and Side Fitting Parts in an Aircraft Bulkhead vol.29, pp.1, 2020, https://doi.org/10.7735/ksmte.2020.29.1.74